Search results

  1. C

    Upgrading a 94GT

    gt-40 engine doesnt have forged pistons which are much better. Mass air should be bigger than TB, go with 75mm or 80mm. get LTs instead of shorties leave your radiator if its in ok shape get fuel pressure regulator - Kons
  2. C

    TOP SPEED ANYONE???

    i went to 240 km/h which is about 150mph i think, but my front right wheel bearing started making crazy noise so i slowed down, my speedo wouldnt show past that point anyhow.
  3. C

    wheel spacers 1" enough? pics?

    with 1 inch one you would have to cut off the ends of your lugnuts. yes, it would be perfect as i had 1 inch ones with 18x8 rim and 265/35 tires before i switched to my current rims. - Kons
  4. C

    HELP AND A WARNING

    last-of-the-5oh is from same place as me, here in Canada, so it'll be harder for him to just call the cops and go to court. these people are in 2 different countries, which makes it a lil harder. - Kons
  5. C

    Desperate, tempted to sell!

    i drilled 1/8" hole in my throttle body butterfly and mine idles fine at 950rpm, i had same problem with E303 cam, our computers are not very adaptive with major modifications. i think you should try the same. - Kons
  6. C

    low mustang 1994

    mine is lowered 2 inch on the back, but the problem was when i had heavy subwoofer box with 2 subs and big amps on the back, with one passenger or more and full tank of gas, probably same in his case, cause 2 inch is not much. now that i have removed all the weight from my car it wouldnt be a...
  7. C

    low mustang 1994

    lift it up on a hoist, by the marks on the driveshaft you'll see the location where its rubbing against the hanger, its either handbrake or fuel/brake lines, cant remember which one it is, you got to relocate the whole bracket from the top of that ( i dunno the terminology - space where the DS...
  8. C

    HELP AND A WARNING

    everytime i buy something on ebay or whatever i **** my pants after the items dont get delivered on time, so far my worst one was when the guy didnt ship it for 2 months after he was suppose to, had to call him for the longest time, but everything was resolved ok. - Kons
  9. C

    Will control arms drop 2/10's?

    if u get the drag racing ones, then yes, if u get road racing ones, you'll be a bit slower than with stock ones. also, you'll need good drag tires to take full advantage of new drag control arms. You'll suffer on the handling side with these tho. - Kons
  10. C

    what 1/4 mile time car sould run

    94-95s are really slow, if you got 2.73s dont expect any faster than 16.0, if u got 3.08 u might run little faster then that, specially thought a slushbox of a tranny that u got. - Kons
  11. C

    what 1/4 mile time car sould run

    i'd say 16.0@84-86mph
  12. C

    low mustang 1994

    let me know if u need more explanation or help.
  13. C

    low mustang 1994

    tires have nothing to do with it, his DS rubs against the body of the car, doesnt matter which tires he gets DS clearance will still be the same. i had this problem when i installed aluminum DS, bracket for brake lines is in that grove made for DS, and has to be relocated to the side of it...
  14. C

    pics of my car

    GTJake is right, maybe 180rwhp, but not more. clean car tho. - Kons
  15. C

    can somebody guide me through removal of AC. car is not mobile ...

    i want to take complete system out of my car, but i guess i have to drain it before i remove it. do u guys have a pic of the tool that i need ? and where to start after i drain the sys ? do i remove everything that is hooked up together or i should leave certain parts ? is there anything heavy...
  16. C

    can somebody guide me through removal of AC. car is not mobile ...

    can somebody guide me through removal of AC. car is not mobile so i cant take it to the shop to have AC drained. What to do ? thanks. - Kons
  17. C

    PITA Problem

    do u have an aftermarket ship ? u could get one, or swhich to 89 computer with PIH harness. or drill 1/8" hole in your TB blade, and lower your idle setting a bit to compensate and the problem will be history. - Kons
  18. C

    HP estimate?

    :bs: 75mm TB is HUGE overkill, so are 30lb injectors. N/A car making 300 rwhp needs only a 65mm TB and 19lb/hr injectors. with above items he might get 220-230rwhp, but will lose on torque. Add after market heads and lose the 30lb injectors for 19s or 24s he'd gain another 40-60 hp...
  19. C

    Valve Cover Questions

    i dont think i need a spacer to clear them, but i just got it anyways. my stock hood was fine with all of that put together. strut tower brace didnt go on tho. - Kons
  20. C

    Valve Cover Questions

    i have these on mine, i have gt-40 heads with 1.72rr and tfs track intakes with a heat spacer 3/8 thick . - Kons
Top Bottom
Back
Forums
Menu