Search results

  1. Big Jay

    Crazy Video

    Thats what it sounds like with no bov's.
  2. Big Jay

    Crazy Video

    This is Steve Cole of Tucson, Az. at the turbomustangs.com shootout in San Antonio. He was ok and nothing on the car was hurt. http://www.turbomustangs.com/car_images/videos/texas04/stevesave.wmv
  3. Big Jay

    BFG DRs vs ET Streets...

    I ran a lot 1.6 with a stock clutch and t-5. It was when I started to run 118+ that i swapped trannies. I sold mine for $500 w/ bellhousing and flywheel to a guy doing a swap. Saved me $500 on the TREMEC.
  4. Big Jay

    I'm going to have $3,000 to spend soon...

    I ran this combo for a while and had good luck. Stock short block, TW Heads w/ 1.72 rockers, GT-40 intake with port matched lower, 70mm TB, 75mmMAF w/CAI, headers, x-pipe, cat-back, 3.73 gears and a set of slicks. Stock fuel w/regulator Stock radiator The trick to making the cooling system...
  5. Big Jay

    If your on the 1/4 Mile list then please respond!

    Stock block, 347 stroker w/main girdle.
  6. Big Jay

    How old is everyone?

    Thats ok I make $35 an hour and am waiting to sell my blower before I can afford a block. You spend what you make.
  7. Big Jay

    How old is everyone?

    27 Tucson, Az. I am a paintless dent repair tech.
  8. Big Jay

    Fox throttle body swap (First impressions)

    I think it has to do with the shape of the adapter elbow. The elbow is not a smooth 45*. I just did because I need to run the tall VC.
  9. Big Jay

    Fox Throttle body Swap People, in here

    Dont change the IAC connector. The TPS has a 5 volt referance wire, a signal wire, and a ground. Use a volt meter to find the wires you need and have fun.
  10. Big Jay

    lets see some engine bays

    It was alot of stages. First was gring the trick flow off the top and removing the extra vacuum boss that interfered with the VC breather. The I paid to polish it. I did a lot of stuff at the same time so i am not sure what the cost would be alone. Then I masked off every thing that was to...
  11. Big Jay

    Raced The Car Tonight...Results Inside!

    You need to weigh all four wheels at the same time (like a real car) and add weight at the appropriate place to get the friction divided over the wheels as evanly as possible. Add some of that special non-stick formula Clark W. Grizzwold used on his sled and its a sure winner. A slight tail...
  12. Big Jay

    lets see some engine bays

    I painted it. About 15 hours to do. Sucked.
  13. Big Jay

    lets see some engine bays

    Here is one of the intake. The valve covers are the FRPP "Ford Racing" talls that I painted.
  14. Big Jay

    Got a little carried away - get in here!

    Re use the stock crank and rods. Get new pistons and a main cap girdle. Deck the block and do a line hone to the mains with the girdle in place. Have the entire rotating assembly balenced and check all clearences. Get head studs and ARP moly lube for correct torque specs. Do not over torque you...
  15. Big Jay

    lets see some engine bays

    I am switching to a big turbo for more streetable power. I drive the car quite a bit and want to run 100LL and the novi was not cutting it with out an intercooler. The belt is ran that way because of the blower and where they put the alt. I have an intercooler in the way. A 26"x14"x4" cross flow.
  16. Big Jay

    lets see some engine bays

    Here is mine with the blower on. The blower kit is for sale. http://www.corral.net/forums/showthread.php?s=&threadid=417853
  17. Big Jay

    What can we polish on our cars?

    I used Dupont Automotive paint. Expensive but the quality of the paint made it easy to apply. It is not nessesary to use engine enamel. Only on the block and pan. Everything above the heads can be sprayed with car paint. Think about this. In the summer hear in Tucson you can fry and egg...
  18. Big Jay

    INTAKE install questions

    The AC line will go over the upper. And yes. Reuse the stock bolts.
  19. Big Jay

    What can we polish on our cars?

    You can polish steel but if you do not paint it it will rust. The best way to go is to chrome the steel items or paint them. When I put my car together I painted some brackets and pulleys. The paint offsets the polished pieces and accents the expensive parts you have bought. Ever seen a car...
  20. Big Jay

    What can we polish on our cars?

    I polished and painted almost everything I could get my hands on. Waterpump timing cover(top) Distributorbase PS bracket alt alt bracket BOV discharge tube blower pulleys bolts intake vc fuel rails ac hard lines. http://68.84.192.182:2000/big%20jay/big%20jay%20013.jpg I...
Top Bottom
Back
Forums
Menu