Search results

  1. Thomas302

    stock FUEL PUMP? OK for my mods?

    155lph will be plenty for your mods. Everyone is suggesting a 190lph, because they are the most popular for modded mustangs, and will support a lot of hp with out hurting you with your current setup. I am running a 190lph pump in my 400hp 331 with no problems, so I say a 155lph will be more...
  2. Thomas302

    Best Combo

    I really don't agree with going all one brand for everything. You just need to know what power you want, and where you want to make it, and build from there. The most important part of the motor is the cam. Do research on a cam that fit your needs, and talk to people that sell cams about what...
  3. Thomas302

    SO im driving down the highway and i see this ricer....

    :rlaugh: That is great!
  4. Thomas302

    What Intake Manifold?!?!

    90mustangGT is right, the GT-40 is over rated, and it really does not flow all that well, thats why I ditched mine, It does not even flow as well as the basic performer, but it will be a good choice for your current setup, along with the cobra, street heat, and performer. I think the street...
  5. Thomas302

    New intake, put new injectors?

    I see, my stock tach sucks, its good down low, but its way off up top. But back to the original post. When I was searching for a new intake, I just started at the search engine on yahoo. I found some really good info on different intakes at the andersonfordmotorsport.com under read media...
  6. Thomas302

    New intake, put new injectors?

    You guys that are pulling to 6k rpm, are you doing that on your stock tach? I know when I shift a 6k rpm on my autometer tach, I am over 7k on my stock tach. The stock tach is not accurate. Just something for you guy to think about.
  7. Thomas302

    How loud is the Powerdyne BD-11 supercharger

    My friend has a powerdyne BD-11A on his 93 coupe, and it is quiet, to quiet. You can barely here it outside the car with the hood down. I believe they are belt driven instead of gear driven which makes them quiet like that. But thats good if you going for the sleeper look.
  8. Thomas302

    intake gasket question

    well I just completed my intake change over yesterday on my car, and it took about 16 hours, but I was not in any hurry to get it done, and I check everything twice. I used new lower intake gaskets(even though it had only been about 1000 miles since I last had the intake off, its good...
  9. Thomas302

    PCV/Catch can thread - just info

    What is the point of the tube from the valve cover to the throttle body? I am using motorsport valve covers with no nipple and I just plugged up the nipple on ththrottle body, and its been that way for 2 years no problems. Should I put a tube there? Just wondering. Thanks Edit: I do have...
  10. Thomas302

    Switching from 24LB's to 30LB's

    ^
  11. Thomas302

    Switching from 24LB's to 30LB's

    Should I bring my fuel pressure down, or leave it alone. Its at 39psi w/vac, and about 44 w/o vac. Maybe this is a dumb question, I guess I should just put them in and see how it runs, and adjust from there, but I just wanted some advice. Also I have a motorsport extender, and I have the A/F...
  12. Thomas302

    New Track times. Good ending point for the year.

    Thats awsome man, cant wait to get my 11 sec time slip let alone a 10 SEC TIME SLIP!!. Congrats :nice:
  13. Thomas302

    Help me set up and decide on my 347 combo

    The 1250 fits really good and tight, it just hangs over on one side or the other, depending on how you set the gasket, maybe 1/32-1/16 of an inch, but its enought to probably restrict some air flow. Nothing a little razor blade couldn't handle. I still think I am going to use the 1262, just...
  14. Thomas302

    Help me set up and decide on my 347 combo

    TFS-R intake with 1262 gasket.
  15. Thomas302

    tb...no egr

    They shipped fast, and it is a great product. They have pretty good feedback, so I said what the heck, I will take a chance. Glad I did, its half the price as the accufab, and with a little time on the buffing wheel, it will look as good as my accufab tb.
  16. Thomas302

    tb...no egr

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=46098&item=7929683757&rd=1 Here is one on ebay for way cheaper then Accufab. I just got mine in yesterday, and it looks nice, good piece, and it fits perfect. Hope this helps.
  17. Thomas302

    Best Intake for my 331??

    Define "outperform". I am not trying to discredit you, I just bought a R intake for my 331, and I am just curious what you mean. Did the guy test the two intakes on the multiple motors with different cam and head combos? Can you direct me to more info on the two intakes. Just triying to get...
  18. Thomas302

    Help me set up and decide on my 347 combo

    How much torque do you think the R is down on the Holley through the power band and up on Hp. I have seen the numbers on a few dyno graphs on the R and it make good tq from 2500 on up but I have never seen the holley dyno. Example, If the R is down say 10fps of torque through the power band...
  19. Thomas302

    Is it hard to install Gears

    I am not saying go out and do it on your own your first time with no help, but its a nice skill to know. Have someone that knows how do it, but be there and watch them and learn all you can. I was scared of gear installation, but after I helped a few times, its not to hard. The main things to...
  20. Thomas302

    Slicks on Stock Axles?

    I have stock 28 spline axles and 26x10.5 et streets with a 331ci 3.73 gears, and I launch at 5k everytime, its been 10 runs now with no problems, most of my runs were 1.6-1.7, so its hooking. My brother has stock axles in his mildly modded Gt with 4.10 gears and a 200hp shot of nos launching...
Top Bottom
Back
Forums
Menu