Search results

  1. SRT Handz

    injector question

    I am using 39's and i am at 407... i could still go higher as well
  2. SRT Handz

    What parts am i going to need to hit my goal??

    No, it wont. You need a Lightening MAF.
  3. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    I only replaced the Subframe Bushings. In the near future i will probably do the FTBR Kit. That will come.... once funds arrive. It was hard for me to justify spending like $700 for the FTBR Kit when my entire IRS Cost $600 lol
  4. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    I spent like a hour aligning the pipes. Kinda sucks since i am gonna take it off and polish it lol
  5. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    Before I installed the IRS, I restore the mangaflow tips since they were used. Detailing cleans anything!!!
  6. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    So i got everything going, i took good pics of everything so i will post it up later. instead of drilling holes into the truck, i just decided to weld the IRS Brackets to the Frame. It was much easier and only has me $40!!!
  7. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    Little teaser
  8. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    This was by far the hardest part of the swap. Brake line mods.
  9. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    ran into an issue with the brake line modification. Have to reflare a line. Grabbing the hardware right now, and if all is well i should have it rolling by tonight.
  10. SRT Handz

    IRS Swap E-Brake Cable Help

    I think 99-04 cables are shorter than 94-98 cables because of the center ebrake cable. Thats why the part numbers are different
  11. SRT Handz

    IRS Swap E-Brake Cable Help

    Took the cables and measured Side by Side. The 98 cable is longer than the 03/04 cobra cable! I searched alot and people said the 03/04 cobra cable was longer, but its not.
  12. SRT Handz

    IRS Swap E-Brake Cable Help

    So i have swapped the 03 Cobra IRS into my Mustang. Problem is the Ebrake Cable... I have used the 03 Cobra Ebrake cable and I cannot get the cable to connect to the caliper..... The cable itself is connected to the caliper but i cant get the E-Clip and cable support into the cable itself...
  13. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    It still aint polished. I am gonna leave it unpolished till maybe next month. Still got alot of odds and ends to do on this. Swapping a motor is easier than this job.... this is annoying.
  14. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    Almost there
  15. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    I am starting the install today. My buddy is coming over right now to give me a hand. I do have more than 400HP.
  16. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    One thing I am concerned is loosing my built rear end. In my SRA I have right now I have FRPP 3.73 gears and an Auburn HD Diff which makes the car drive really nice. Dont know how good going back to a T-Lock would be.
  17. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    Well it does look problem free. The only think was a torn halfshaft boot which i replaced.... and i opened up the case and it looks fine. Also changed the fluid with OEM fluid.... I am just concerned i wont like it.
  18. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    I keep second guessing this swap
  19. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    MM subframe brushing for IRS. Got the tool also.
  20. SRT Handz

    Got my car tuned finally.

    I dont trust the stock pump at that power. I am making 407/420 and i used a Lincoln Aviator Fuel pump and a 40amp BAP.
Top Bottom
Back
Forums
Menu