Search results

  1. 95strokerPSU

    Upgrade axles?

    I only difference I know about is that the Cobra diff uses carbon fiber clutch packs. How that makes it better I'm not sure, but I had a lot of people recommend the Cobra diff and I got a really good deal on it.
  2. 95strokerPSU

    Upgrade axles?

    Basically the same as above except I got Moser axles at a discounted price with the purchase of the 03 Cobra diff and 4.10 gears. I also put a MAC girdle on it.
  3. 95strokerPSU

    Sellers of Couplers and T-Bolt Clamps

    Race Part Solutions is a good company. I got all my silicon couplers, t-bolt clamps and aluminum tubing for the CAI I made... then after chroming...
  4. 95strokerPSU

    subframe connector install price

    It depends on how the shop installs them. Anyone can just weld them right up and get you out the door in an hour, but the places that are charging $300-$500 grind the surfaces down to get a better weld and then paint everything after all of the welding is done for rust protection. Is all of...
  5. 95strokerPSU

    tach places?

    Mines' wedged between the dash on the A-pillar and there's a small piece of double sided tape keeping it from moving (doesn't move at all)...
  6. 95strokerPSU

    TKO 600 an clutch cable cover

    Mine's sitting in a box in the basement as well. No problems
  7. 95strokerPSU

    Painted Exterior Piece?

    I used Dupont's trim black paint can. Looks brand new and has held up perfectly after three years
  8. 95strokerPSU

    Accufab Throttle Bodies

    You're TB will come with an IAC gasket.
  9. 95strokerPSU

    is this a good deal on a motor?

    How much is he asking for it?
  10. 95strokerPSU

    Not running like it was at the track last year.

    Did your car have cats last year? That could be your performance difference
  11. 95strokerPSU

    Accufab Throttle Bodies

    I bought a used polished one off of eBay. Do a search for "polished IAC" and you'll get a couple hits
  12. 95strokerPSU

    Accufab Throttle Bodies

    I think either will work. I used a 3/8" spacer and there's definitely enough slack in the fox throttle cable to reach if I did use a 2" spacer.
  13. 95strokerPSU

    Another Fox TB Conversion Question.

    I got my Accufab TB from www.bieberfever.com and also got a used throttle cable and bracket from them. They should know everything you need for the swap and since they deal in used parts you should be able to get everything from them. I know there was thread awhile ago about them screwing some...
  14. 95strokerPSU

    Rack & Pinion question (95 vs 03)

    All 94-04 racks are interchangable. I just put a 03 Cobra rack on my 95 and it bolted up with no modifications.
  15. 95strokerPSU

    Oil seperator steeda, husky

    Campbell filter
  16. 95strokerPSU

    New Thermostat Housing

    I'm assuming you don't want to go with the chrome one again because it leaked? Mine leaked too because it warped, but I just use one full gasket and the bottom half of a second gasket. No leaks and it's blingy. There's no way I could justify spending $160+ on a T-stat housing.
  17. 95strokerPSU

    BBK 255 lph Fuel Pump Question

    They are different, but I believe it's only the sock that's different. Either way get the 86-97 pump.
  18. 95strokerPSU

    Accufab Throttle Bodies

    I bought just the "body" and got a 3/8" spacer off of eBay. I don't run EGR though. Very nice throttle body, I highly recommend it!
  19. 95strokerPSU

    need a measurement right quick...

    29.969" or 29 31/32"
  20. 95strokerPSU

    What's your opinion on Sparco Torino seats?

    Not sure how cheap you can get those for, but for the price I really like my Corbeau CR-1s. Really comfortable and holds me tight in the seat side to side. I just recovered them with the black/silver microsuede fabric and they look and feel great. I'll try to get some pics up this weekend...
Top Bottom
Back
Forums
Menu