Search results

  1. khal101

    NE1 Have Projector lights?

    Ebay....I searched under Euro headlights mustang.
  2. khal101

    NE1 Have Projector lights?

    Oh and one of the front
  3. khal101

    NE1 Have Projector lights?

    Ok I got some pics of my car now. Here they are:
  4. khal101

    NE1 Have Projector lights?

    My projectors only cost me $200 for the set of 6 off of ebay. Take a look on there.
  5. khal101

    NE1 Have Projector lights?

    I have projector headlights and they are great! They have been on my car for only 6 months so they haven't had a chance to yellow. They are really bright at the moment, but I am planning on doing a light bulb swap to the 9006 super bright halogens (one of these days). I will try to get a pic...
  6. khal101

    2.3L to a 3.8L ???? can it be done??

    The 3.8 is a crap @$$ motor too. I work in a shop and if you blow a headgasket on a 3.8, be prepared to put another engine in the car.
  7. khal101

    93 2.3 vs 86 TC2.3T sensors

    Well the reason I am asking is b/c there are sensors that I dont know the name of on the "non turbo" side and some are cracked, wires broken, etc. One that comes to mind is the long wire that goes into the pan that determines if your oil is low. That wire has a 2 or 3 places that it hooks up...
  8. khal101

    93 2.3 vs 86 TC2.3T sensors

    Anyone????? Did i ask a hard question or a dumb one?
  9. khal101

    93 2.3 vs 86 TC2.3T sensors

    Guys, I have a question. On the 86 TC motor I have, there are a few sensors that are broken/dont work that go with the block itself. How compatible are the sensors such as the coolant temp sensor and others on the block with the ones off of the 93 mustang block. I would like to replace most...
  10. khal101

    Rack bushings

    I agree
  11. khal101

    2.3 Custom Headers....Horsepower???

    Turbo or n/a?
  12. khal101

    If I do NOT cut and roatate the Intake

    No
  13. khal101

    Is my booster bad?

    To check your brake booster, turn off your car and pump the brakes until they are tight. If your pedal goes down some then you're booster is ok. If the pedal stays where it is then you're booster is bad. Also you may want to check your "check valve" on the booster. It is a one way valve. It...
  14. khal101

    What tranny behind 2.3 N/A

    The AOD is for the 5.0 which won't fit on the 2.3 properly. The imput shaft is different, possibly the gears inside the AOD will have different ratios also since its for a V8. You would be better off getting a T5 for a 2.3 and switching it over to 5 speed. If you just wanna keep the...
  15. khal101

    Need an exploded view!

    Thanks. That helps alot. Soon I will put pics of my Cobra RR SVO hood (no ground effects), euro clear headlights, and new paint job.
  16. khal101

    Need an exploded view!

    Hey guys, i need an exploded view of a turbo engine. i have parts that i dont even know where they go. Even a pic of a completely assembled engine can help me (from all sides). If you can help me, please post the pics or point me to the site. Thanks.
  17. khal101

    oil starvation in the head

    Lack of oil changes can clog up the passages leading up to the head which can cause that wear. Since you're pulling everything apart, clean out those passages. Also the turbo cams wear ALOT more than the n/a 2.3.
  18. khal101

    A Big Wtf!

    RPMs up and down is usually some type of vacuum leak. Definately check your electrical system. Have your car running and check each wire one at a time. If they are all good then spray some carb cleaner or something into your throttle body. If you have a fuel problem then it should go away...
  19. khal101

    Heater Core

    You know what?? They SUCK to replace. Never follow the Haynes manual for instructions on how to fix your car. It took me a total of 6 hours to do and then I had to fudge part of it. :nonono: Does anyone know the quicker way to replace just so I know.
  20. khal101

    Clutch/Pressure Plate/Flywheel ?

    Ok, that is what I was wondering. I cant match them up b/c the n/a clutch is still in the car. Guess I better get these last things. Finally I am 95% done.
Top Bottom
Back
Forums
Menu