Search results

  1. weldonGT

    prochamber noises

    Have you checked for a minor exhaust leak...mine was a PITA to get all the leaks stopped, and it made some wierd noises before I got everything settled.
  2. weldonGT

    calling all floridians

    Gainesville Here :nice:
  3. weldonGT

    40th Anniv What Happened to the Pin Strips

    What Happened to the Pin Stripes My white 04 has a tan pin stripe down the side and I noticed that it doesn't show up in any pictures, then I noticed that nearly every pic I see of 99+ mustangs...no pin stripes... Does anyone else have pin stripes or do they all just disappear in pic?
  4. weldonGT

    Tachometer Installation Help

    You'll need to get another piece of hardware...called a Tach adapter you can pick one up for around $50 (I did a quick search and that was the first I found). You can go to http://www.ponyexpressperformance.com/tachadapter.html and check it out. Someone may know a way around having to buy...
  5. weldonGT

    Dyno Loss

    Right..That makes sense...I guess I'm just wondering why the loss is greater since the componets that would cause the loss are still the same. The loss would be caused by the friction in the tranny, rearend, rotational loss, friction, friction, friction....so none of that changes if I bolt on...
  6. weldonGT

    Dyno Loss

    Sorry if this has been explained before (the searches I tried returned WAY too many results to wade thru), but I have a question about the 15% loss between flywheel HP and RWHP: So the more power you make at the flywheel, the more power you lose before it gets to the pavement? How is that...
  7. weldonGT

    Exhaust advise

    Off Road Pro-Chamber and MagnaFlow :nice:
  8. weldonGT

    $660/hr!!!

    $250,000...Does that include a warrenty?
  9. weldonGT

    $660/hr!!!

    I was on a cell phone standing on a balcony so maybe I did misunderstand him. But he also quoted well over $2K for a crank which I know is too high. His total for the build was just over $6k for the whole shootin' match, so maybe $660/hr isn't right.
  10. weldonGT

    $660/hr!!!

    Called my local performance shop (the only one in the area) and they quoted me $660/hr for a engine rebuild. I'm looking to go with forged internals and put some serious giggle juice to it, but $660/hr for labor in addition to the parts seems a bit steep. For that kind of money, I'll buy a...
  11. weldonGT

    Help with stopping an exhaust leak

    I had the same problem with my o/r prochamber. If you are running the stock exhaust manifolds there are studs available from NAPA that everyone says works great...I eventually tightened mine up with the stock studs and so far so good, but the NAPA part number for the studs I believe is...
  12. weldonGT

    Another Clay Bar Thread...

    I bought the car used (though it is a 04 with only 5K miles), so while I live in Florida, it is possible that it may be salt stains. These spots have been on there since I bought it....I didn't see them when I test drove the car as they are not easy to see, but after I washed it the first...
  13. weldonGT

    squishy brakes

    Bleeding couldn't hurt. I always take the top off the master cylinder when I compress the brake pistons to give the fuild somewhere to go. I'd def say bleed 'em. Take car. WeldonGT
  14. weldonGT

    Another Clay Bar Thread...

    Tiny Iron Particles would make sense...they are little specks that I can feel, then after tiny bumps comes off it leaves a brown speck of a stain behind and that is what is so hard to get off. Thanks for the input guys. Guess I'm off to the store for more beer, luckily the specks are only on...
  15. weldonGT

    FL UNDER STATE OF EMERGENCY

    Gainesville here...looks like we're going to luck out and only get some rain and 30mph gusts. Good luck to to the rest...hope it wasn't too bad for you. God Bless.
  16. weldonGT

    any different in MIL eliminators?

    I ordered Dallas Mustang MILs but Ninosport substituted BBK MILS for the Dallas Mustangs ones because the Dallas was out of stock. I haven't had any problems with the BBKs, of course what I've seen they are all about the same, just packaged different, and some are different colors (I guess they...
  17. weldonGT

    Another Clay Bar Thread...

    Cool, thanks for the replys.
  18. weldonGT

    Another Clay Bar Thread...

    Ok...after 5 beers and plenty of Clay Lube and elbow grease, I finished 1/4 of my hood. The problem is that I have these demonic brown specks on my paint :mad: . I have a white stang and of course it shows every little spot, but these little brown specks are evil. I've tried Maguiers three...
  19. weldonGT

    2 sets of O2 extenders?

    I've searched for this answer before posting, so I'm sorry if this is a worn out question. I have a 04 GT and My only mod is a off road prochamber. It sounds NICE even with the stock catback, but now I want more and am planning to go LT, off road prochamber and magnaflow catback. My...
  20. weldonGT

    Do I need the extension cables for the O2 simulators with the MAC ProChamber

    SOTP dyno says there is more power from about 3k up and I'm all stock but for the prochamber. I'm going for a couple of real dyno pulls in a couple of weeks so we'll see.
Top Bottom
Back
Forums
Menu