Search results

  1. 88POSLX

    injector install

    You don't need the fuel line tool, just move the rail out of the way. Yes, a new upper to lower gasket will be needed. You'll also need new o-rings. Make sure none of the old ones are still stuck in the rail. That's pretty much it, but this would be a good time to install an AFPR if you...
  2. 88POSLX

    Kenny Bell blower

    You want to run 20psi from a KB and you're on here asking questions? You don't find too many 9 second Stang owners asking questions... Right parts? What do YOU think you'd need to run 20psi?
  3. 88POSLX

    Polished intake question

    What about a can of brake cleaner? Engine cleaner is pretty nasty crap. But first, I would call the company/guy that did the polish and see what they/he recommends.
  4. 88POSLX

    Exhaust poll

    I chose other... for a daily I'd go 50 series flowmasters. Other people will disagree with Flowmasters, but I have yet to hear a Mustang sound as good with any other exhaust.
  5. 88POSLX

    oil pump priming?

    Pull the distributor out. You'll need (it's been a while, so this might be wrong) a 1/4" socket to fit on the oilpump driveshaft. I use an impact atached to a 1/2" by 3/8" adapter. Then a long 3/8" extension atached to a 3/8" by 1/4" adapter. Then a deep socket.
  6. 88POSLX

    Anyone using the Holley Systemax II intake?

    You forgot the most important and only option... it was a ****ty casting.
  7. 88POSLX

    Anyone using the Holley Systemax II intake?

    Yeah, my brother has the intake. I'm not overly impressed with fit/finish myself. When he got the heads ported (Brodix) the porter couldn't even get the ports on the Systemax to match up cuz the casting was so off. I was going to polish the upper for him too but now you've got me worried.
  8. 88POSLX

    Engine Swap..How much WORK involved

    Great post Michael, but I do disagree here. The mustang (is your Volvo setup different?) has two BIG receiving holes just so you can get it in. I've done it many times and never had a problem. Kinda looks like this O--- So the big studs will hit the big holes first, then slide down the slots...
  9. 88POSLX

    3 Bar Map Sensor, What for???

    I'm not very knowledgable in this area, but I do know they're used in boosted situations. Just going by the name of MAP (manifold absolute pressure) sensor, my guess is that a stock sensor will not register beyond atmospheric pressure, which is 1 bar absolute pressure (0 psig). As soon as you...
  10. 88POSLX

    ATTN: Polishers - got a quick question

    I believe it. Even with a da sander with 80 grit it takes a long time to get the pits out of an intake. I wouldn't even try it by hand.
  11. 88POSLX

    Guys who went from 2.73s to 4.10s, lets hear your opinions

    I don't get it. Look in my sig... my car isn't fast, but it isn't slow either. I don't know how you guys can roast 2nd gear when I can't even do first. So, when rolling you guys can hammer the pedal and smoke the tires in second gear?
  12. 88POSLX

    Guys who went from 2.73s to 4.10s, lets hear your opinions

    Everyone's combo is different... I gained absolutely nothing when I made the swap. I did make gains on my sixty foots with slicks though...
  13. 88POSLX

    ATTN: Polishers - got a quick question

    I use a DA sander for most of my work. It's fast... almost too fast. You have to be carefull on smaller pieces (tensioners... damn arrow didn't see what hit it). Just be glad you didn't start with an upper intake. Once you get that powder coating off the whole thing is pitted like that. I...
  14. 88POSLX

    Guys who went from 2.73s to 4.10s, lets hear your opinions

    Did 3.08 to 4.10's this summer on my T5 car. Feels good, I just need more power. I was hoping for some traction issues, but nothing... I still can't spin my tires.
  15. 88POSLX

    Help with how you activate/use Nitrous? And Turn off.

    You should use a momentary switch. It will work while the button is depressed. As soon as you let go the circuit is broken. NOS switch
  16. 88POSLX

    how to install front springs?

    Why the spindle? I want to install my drag launch kit over xmas and am interested in the install process as well. But I don't understand why the spindle has to come out...
  17. 88POSLX

    battery relocation

  18. 88POSLX

    4-lug bolt pattern

    Yes, 4X4.25.
  19. 88POSLX

    Ordering 3g alternator, but have a question

    I assume 5.0Droptop was going to include this link... Alterstart 3G
  20. 88POSLX

    Desktop Dyno users...In here!

    Well, once you start making 900hp, you'll need a 8-9000rpm redline so you can pull the 160mph quarters...
View older results
Top Bottom
Back
Forums
Menu