Search results

  1. M

    FRPP Cams, where to order them?

    I got them at buyfordracing.com for $750 plus shipping. I have sent a few people there and they have gotten them right away also.
  2. M

    ffrp hotrod cams w/ procharger?

    If you are doing heads and looking for the most power I don't see why you would consider any of the nsr cams, they are not going to compare with the other cams.
  3. M

    ffrp hotrod cams w/ procharger?

    Nice gains but you can't really give all of the credit to the cams since you are coming from the stock tune. The fact that you lost torque even with a custom dyno tune over the stock tune is pretty scary.
  4. M

    ffrp hotrod cams w/ procharger?

    Just to be clear though, I only gained somewhere in the 30s. My baseline pull was only to 6,000 and the final pull was to 6250. It was still making power right until he let off too.
  5. M

    3 valve intake manifold!C&L

    every-ting is irie mon!
  6. M

    3 valve intake manifold!C&L

    It does not exist. I talked to the guys at C&L 9 months ago and they told me the same story then as they did the other day. They are close to releasing one but they have NOT made one yet. He did say that the article you are talking about mistakenly said it is available. Maybe YOU should get...
  7. M

    ffrp hotrod cams w/ procharger?

    WOW...... FRPPs don't make power? FRPPs, lose low end torque? Comps make more power because of phaser limiters? Hahahahahaha..... First of all, our cars have cam phasers to make torque, and Comp is telling people that phaser limiters are a good thing? Show me a dyno sheet from...
  8. M

    Another stupid newbie question

    Have the dealer install it and add it to the sticker price. As a matter of fact, have them put two on there so my wife doesn't bitch at me either. :D Or you could always just buy a GT500.
  9. M

    ffrp hotrod cams w/ procharger?

    I disagree that the hot rod cams are going to amplify your lack of low end torque since I have them and I didn't lose anything down low. I didn't gain anything down low but I didn't lose anything either. They are definitely not the best blower cams you can get, but if you want the choppy idle...
  10. M

    3 valve intake manifold!C&L

    This thing is about as real as a unicorn. I don't know what you read or heard but it does not exist, yet anyway.
  11. M

    brand new 08 gt.... help me out

    For exhaust you might want to start out with an off road H or X pipe. The X will make a little more power, but IMHO the H sounds better. H pipes have a deeper sound and X pipes are more raspy sounding. Pypes makes a decent quality midpipe which is fairly inexpensive. Most people who go to an off...
  12. M

    Phone Symbol on Radio?? 08 GT

    I don't have that on my 07. If it says no phone when you press it then I would guess it is some sort of bluetooth handsfree setup so you can use the audio system for phone calls.
  13. M

    big guy in a little mustang possible?

    So I think you get the point that there are quite a few of us "biguns" that fit just fine. I am not the only one that I know of that thinks these are not the most cushy seats for long hauls though.
  14. M

    New Member

    Well I just met up with Vic today so he could hear my cams. After seeing his car it is safe to say that....... :worthlesb Nice car, and nice meeting you too.
  15. M

    New Member

    Ok guys, don't talk to this dude! He is getting my cams on Friday and he lives right around the corner from me on top of it. He also has a Whipple making 15lbs. of boost on a stock motor. :jaw: So much for me being the big shot around here with the choppy cams. :cry::cry::cry::cry::cry::cry::cry:
  16. M

    mouse crap, cleaning engine, heat blanket

    I hope this isn't against the rules, but I remember seeing one on Modded Mustangs. If I remember correctly it was made by either Emay or HeavyGT and it was incredible.
  17. M

    What's better? Need info.

    They're both good, you can't go wrong with either one. Are you trying to start a war here?
  18. M

    Long Tube Headers 1-5/8 or 1-3/4?

    My car is NA now, but I hope to add a twin screw in the future. Should I go with the smaller primaries now to avoid loss of low end power, or should I suffer now in order to have the larger diameter when I go FI? I am leaning towards the 1-5/8 but I wan to know if anyone else has been through...
  19. M

    mouse crap, cleaning engine, heat blanket

    I an attest to the fact that mice love that battery blanket. I used some poison in the garage to get rid of them, but if you are having a problem outside then you might want to remove the blanket.
  20. M

    cams

    All I know is that FRPP claims they are for off-road use only and not emmissions compliant. That sounds like they are not street legal to me.
Top Bottom
Back
Forums
Menu