Search results

  1. bill302

    Timing?!

    just go to your local parts store and ask for fel-pro part # MS93334 or do a google search to find best price i paid about $10.00 at advance auto parts
  2. bill302

    Instability issues

    uneven tire wear on the front...you might need to get a front end alignment or at least get it checked.after getting it checked a good front end man can tell you if you have any serious problems....
  3. bill302

    Timing?!

    proper torque sequence for the lower intake.. torque in 3 steps Step 1 torque all bolts in sequence to 8 ft.lbs. Step 2 torque all bolts in sequence to 16 ft. lbs. Step 3 torque all bolts in sequence to 23-25 ft. lbs.
  4. bill302

    Timing?!

    this is the lower intake gasket i used it works great(click on link below) and has the rubber front and back gaskets. some gasket kits come with the cork rubber which i dont like...just line up intake gaskets with ports and tack glue down to head to keep gasket from moving when installing...
  5. bill302

    Fresh out of the paint shop - my new ride! Pics!

    paint looks great. as Green GT says some fresh black paint will look good on side mirrors..carb foxbody 5.0 motor what year model motor is that, and you need to clean up the wiring mess under the hood a good washing some wire looms and rerouting will look great..
  6. bill302

    Whats wrong w/ this picture?

    ok so they sent you the wrong pump?
  7. bill302

    Whats wrong w/ this picture?

    read my post above the gasket you need is felpro part #35397 it costs $1.50 at autozone ill post a picture of both gaskets below the only difference is the coolant ports....
  8. bill302

    tps reading: no lower than 1.4x volts

    sounds like its shot...
  9. bill302

    I need help!With 1995 GT

    do you have an update..
  10. bill302

    tps reading: no lower than 1.4x volts

    have you tried to elongate the bolt holes a little more with a file or a dremel so it can be rotated to get 9.8-1.0
  11. bill302

    What ECM?

    A3M - 89-93 5.0L Mustang 5-spd
  12. bill302

    Brake Problems

    also ensure you break in the new rotors and pads properly.. read below...this is the process i use. If you've just installed a big brake kit or even if you've only changed your brake pads and rotors, you should "bed" them in by following the instructions below. Proper bedding of brakes will...
  13. bill302

    Brake Problems

    prolly the pads the cheaper basic pads loose effectiveness under high heat i run the same rotors with wagner thermo quiet pads and they work great. i would trade in old pads and upgrade..
  14. bill302

    Whats wrong w/ this picture?

    you have the wrong gasket you need felpro part #35397 you have the felpro 35211 gasket on it now but it is wrong click on link.... http://www.autozone.com/Ntt,35397/shopping/allResults.htm
  15. bill302

    Where should I gap my plugs??

    use Autolite Ignition Spark Plugs: Copper Core part #25 our cars run better on the copper plugs and gap them at .044 for 89-90 models and .054 for 91-95 models...you prolly fouled the plugs you have in at the moment with the bad sparkplug wires not allowing the plugs to fire properly which...
  16. bill302

    valve seals

    without removing the heads you will need an overhead valve spring compressor,air compressor and a valve holder hose....you will remove upper intake, valve covers and sparkplugs then rotate engine until the cylinder your working on has both intake and exhaust valves in the closed position (rocker...
  17. bill302

    T-45 issues

    check the u-joints...
  18. bill302

    IM so dumb! Help

    this is a front view of a balancer it is a solid unit..the rubber ring can be seen. this is what gives way and causes the outter ring to slip which causes the vibration..if this balancer is not a solid unit its bad and needs to be replaced.. rear view of the balancer you can see the...
  19. bill302

    Bad Heater Core Or Condensation?

    are you loosing coolant? monitor the overflow bottle to notice if you are loosing coolant.explain when car is overheating, also ensure cooling fan is operating properly
  20. bill302

    Need help on 5.0 conversion.....

    tried to view your pics. but you are set to private so i sent you a friends request..
Top Bottom
Back
Forums
Menu