Search results

  1. Motorhead6T5

    Push button activation of zex kit?

    Looks good,did you make the cup/switch panel? So do you just give it like 3/4 throttle till you get reved out a bit? Or do you just flip the toggle once you get off the line?
  2. Motorhead6T5

    Push button activation of zex kit?

    A window switch would be ideal,its just really expensive for the distributerless fords. I'm already gonna get the tuner kit on top of the n20 kit,so with a window switch its starting to get really expensive. Do you run yours with a WOT switch or a push button?
  3. Motorhead6T5

    Push button activation of zex kit?

    It would be a pain to hit the button,and shift at the same time that way. I had a n20 kit set up like that on a past car,and I couldn't get my hand on the shifter fast enough. If it worked as an arming switch then that would work.
  4. Motorhead6T5

    under-pulleys worth it?

    Lower control arms,no more wheel hop.
  5. Motorhead6T5

    Push button activation of zex kit?

    I'm putting together a zex n20 setup for my car, how do you guys go about running at the track/from a dead stop,with the WOT activation. Since you can't run n20 below 2-3k rpm. I was thinking of maybe using a shifter ball switch instead of the supplied arming switch. Will their be any problems...
  6. Motorhead6T5

    Bigger/lower profile tires

    I'm running 255 45 17's,they are 26" tall,they would fit on the stock rim fine but like the others said it would look funny if not lowered. Plus you would need a tuner to correct the speedo.
  7. Motorhead6T5

    under-pulleys worth it?

    Good drivin,the pulleys haven't drained my car of volts one bit in the last 5k. I personaly have never heard anyone have problems with the pulleys for the 05's. Its not like the foxbody pulleys.
  8. Motorhead6T5

    Boost v. Horsepower. Danger?

    The rods and pistons just can't handle it,even without detonation.
  9. Motorhead6T5

    Who would win? 04 cobra or 05-06 GT?

    05 stangs got a good chance to the 60ft mark!!!!
  10. Motorhead6T5

    under-pulleys worth it?

    It's not hard to install if you remove the electric fan. You will need a 3 prong puller. I don't see a speed shop charging more than an hour labor if they know what they are doing.
  11. Motorhead6T5

    Runnig close to redline?

    Must be the VVT:rlaugh:
  12. Motorhead6T5

    Konig Unknown Wheels

    Why so narrow of a tire on the 19 option? 19's are gonna start slowing you down in performance. And if they are cheap they will bend.
  13. Motorhead6T5

    Something loose in front end.

    Ok cool thats probably it then,I haven't had a chance to get the car in the air yet. Ill let you guys know if it fixes it!
  14. Motorhead6T5

    Runnig close to redline?

    Theirs no point in reving past 6k on the stock tune anyways,your just gonna be going slower.
  15. Motorhead6T5

    Who would win? 2006 Mustang GT or 2004 Mustang GT?

    For what its worth,when my car was bone stock,I raced a stock a/t 02 gt from a dig and roll about 10 times. Every time I put the hutin on that car,even when he had a few car length head starts. You can claim that 99-04's are just as fast with so and so bolt ons,you put those bolt ons on an...
  16. Motorhead6T5

    Runnig close to redline?

    I bounce mine off the 6800 rev limiter regularly,you should be fine.
  17. Motorhead6T5

    Something loose in front end.

    I will try and tighten them,but they weren't loose when I tried to shake em.
  18. Motorhead6T5

    Something loose in front end.

    I was coming home cristmas evening, and as I was puling into my neigborhood, I noticed a odd niose from my front end as I went over a rough part of the street. Didn't think much of it till a day later when I drove my car again. and every bump I got a weird noise from the front suspension like...
  19. Motorhead6T5

    Who would win? 2006 Mustang GT or 2004 Mustang GT?

    Or about as rare as a LS1 f-body running high 12's stock.
  20. Motorhead6T5

    XMODS Evolution Ford Mustang GT

    I want the elpa kit from one28thrc.com,its the li-ion battery kit. It will be too fast lol. its almost $50 bucks with the charger though. I put ball bearings and a custom ball bearing motor in my 06 stang,its pretty damn fast on 4 cells the way it is now.
Top Bottom
Back
Forums
Menu