Search results

  1. jst6

    Calling all Tucson Stangneters

    Is any one else going to the Little Anthony's Car Show tomorrow? I’ll be there in my ’66 and lawn chairs;) If any of you do show up stop buy and say hi. I’d love to meet someone who actually posts here. Little Anthony’s Diner is on the Southwest corner of Broadway and Kolb on the east side...
  2. jst6

    Check Out This Website

    wouldn't it be nice if he jsuta came up front and said, "hey guys, i just finished my web site. what do you think?" instead of this misleading BS.
  3. jst6

    To My Fellow Emergency Service Workers......Please Be Careful Out There!

    ya know, every time i'm running code to something; be it a wreck, debris in the road, a shooting, a robbery etc., it seems as tho every IDIOT out there wants to go LEFT instead of to the right where they are supposed to go. its not like i dont have flashing red and blue or a loud siren or...
  4. jst6

    Classic car insurance.

    same here hagerty is pretty good, agreed value of $10K ... 130/year no deductable. need to up that know tho with everything i've done to it.
  5. jst6

    What to fill tranny with?

    ok srry to have hijaked the thread, but know i'm confused i though all the "knew" t-5 style transmissions were "tremec" t-3550's or 4550 and the old fox body had a true t-5 and tremec made a stronger version for the cobra. i'm tired, i think i jsut stripped my gears...
  6. jst6

    Replacement engine availability...in the years to come

    Isn't Dart and World already making 302 and 351 based motors? granted they are strong as all heck and priced up there too :D
  7. jst6

    What to fill tranny with?

    whoa cool. didn't know it used atf fluid! i was calling info about the older t-5's. don't know much about the t3550's (new style t-5).
  8. jst6

    What to fill tranny with?

    redline 75w or 80w, that's what most performance companies recomend.
  9. jst6

    Which SBF cylinder heads?

    if you like AFR why not the 185's? the 165's seem to be too small for the money. if your considering those the edelbrock RPMs are cheaper for the flow. my two pennies
  10. jst6

    Need help with purchaseing a new 3rd member

    the bearing size refers to the axle tubes. the small bearings hae a step down like the 8" axle tubes, called 9" small bearing. the large bearing refers to the straight tubes that stay "large" all the way to the flange. the third member is not effected. however, a 9.5 wont work with a 9"...
  11. jst6

    8.8 in a '66 - is it possible w/out being expensive?

    I've researched that myself. i've found that a 9" will cost the same amount an 8.8 will. so i'm probably not going with either since i can build the 8" in my car already for less than half of the $$$ than the 8.8 or 9.
  12. jst6

    q about new heads...

    The little 289 in my car have the stock heads and I want to upgrade the heads ASAP. My biggest question is can I go with a 2.02/1.60 valve size and not hit the stock flat top piston? I don't want to be forced to buy new pistons to accommodate as that would mean an entire rebuild (one of those...
  13. jst6

    Scared the pants off Honda's Finest

    I guess you could call that: "getting your gear off" ?? lol, ricers suck:)
  14. jst6

    Crawlin' Out from the Antihistamine Haze and Mumbling way Off-Topic

    hey Lefty and I were in the same academy class. Lefty could only be one former marine i know of out in Yuma! small world. tell him sterl says hi :D as for the minute men... i think they are doing a great job. here in tucson we jsut had some liberal sob complain to the news that a minute...
  15. jst6

    Crawlin' Out from the Antihistamine Haze and Mumbling way Off-Topic

    be very wary of the MS13 guys, we're geting a lot of intel about those guys. just one note about the 870, we're one of the few agencies in this state that have them issued to our officers. mine sits on the passenger's side in the electro-lock wtih the extended magazine (8 rounds) and the 6...
  16. jst6

    1320stangs.com

    i've been voyuering the site for a while. i love the jokes and some of the info is ok. but all of a sudden you have to be "verified" to use the forums! wtf?!? i realize the site is for us AZ guys but come on, i'm not driving 130 miles to go to a "meet" just so i can laugh at a few online...
  17. jst6

    Anyone Using Ssbc On A 65-66?

    just finished converting the front on my 66coupe. for the most part it was very straight forward. the biggest problem i ran into was loosening the lines that go to the distro block from the m/c. the only way i was able to get the job done was by cutting the line as close to the connector on...
  18. jst6

    Front end suspension rebuild kit

    I did my entire suspension setup thru M+, never had any complaints with them and the parts are great. btw my susp does not squeak at all under normal driving conditions. if you go up and donw the radiused curbs in our driveway or hard driving i do hear a little squeak but nothing worth getting...
  19. jst6

    thermoelectric coolers...

    yes the peltier setup. ok, just though i was having a "briliant" moment, often times mine just seem to be illusions of grandure;) lol
  20. jst6

    thermoelectric coolers...

    I've seen the plug in electric coolers from igloo, and i've seen the thermoelctric coolers you can put on your computer's cpu, and they both run on 12v... so, why cant we use 'em to cool our intakes? intake tubes from super/turbos? fuel lines? carbs? has anyone played with these yet...
Top Bottom
Back
Forums
Menu