Search results

  1. R

    Electrical Need Help With My 95 Gt

    Bump. Keep us updated on the project.
  2. R

    Massive electrical problem!!!! Need a bit of advice. PWEEZ!!

    I had a similar problem 2 years ago, im thinking mine might be either a ground or the alternator cable that has that oval rubber cap. I replaced a ground cable it seemed to help some, as well as that alternator cable, but I still get similar problems like when I turn the on (stock stereo system...
  3. R

    wheel hop. differential chatter, maybe clutch chatter?

    Raise the rear of the car so that both wheels are off the ground, mark the top of the tires with chalk or something visible, rotate only one wheel, if the lines that you drew on don't line up in the same direction, you might need a new clutch pak, this is what might be causing the one wheel hop...
  4. R

    95 gt auto trans issues

    Ask around on the rebuild, most places will want to sell you an only parts guarantee, could be pretty costlly.
  5. R

    car died in the middle of the street

    Nope, car stereo system is stock, I did have it die on me once when I turned the stereo on, but that was on an old battery, and when I had the faulty alternator to battery cable installed. Since installing a new bat to alt cable and new battery I have not had a problem of it dieng on me once...
  6. R

    car died in the middle of the street

    Hey Chris i do have under drive pulleys on the car. That will be my next attempt at fixing this problem. Yesterday I tried cleaning what I believe is the IAC (hooked to the throttle body) with some carb cleaner, it seemed to have worked, my dash battery gauge stayed about in the middle...
  7. R

    car died in the middle of the street

    I found a replacement cable, for the alternator to battery cable at the junkyard for $3, you were correct about the wire getting crusty. Now the problem I have is my voltage meter. The dash's diagram has a range of 8-18 if im correct, well my charge is fluctuating between maybe 10 to 12 at...
  8. R

    what a difference!

    What kind of tools did you use to polish your manifold? I too have a Performer upper and lower and have wondered how to polish those.
  9. R

    Shift kits

    You dont have replace the pressure plate, youll need your original stock plate for the transgo kit. The 1-2 2-3 accumulator pistons cost me around 26 dollars at the ford dealership for both pistons, but are optional. Ford-AODE.com the Ultimate AODE / 4R70W Performance Transmission Website...
  10. R

    Shift kits

    Since your taking apart the valve body, you might wanna change the 1-2 and 3-4 accumulator valve's to the rubber style. If I remember correctlly the transgo kit includes all gaskets. 1 other thing, theres a pressure valve that is sold seperatlly on paperformanceautomatic.com our valve bodys get...
  11. R

    Is this normal backlash on rear wheels

    Looks like i'll be re-torquing those bolts this weekend, I used a bottle of the XL-3 Ford friction modifier, along with pure synthetic.
  12. R

    Is this normal backlash on rear wheels

    I started the car this morning, and took it around the block. I wasn't too happy witht the ammount of oil I put in the differential, so im going to add more saturday and start peeling the tires. Also, I ran out of the Permatex thread sealant, and started using nylon tape sealant on the...
  13. R

    Is this normal backlash on rear wheels

    That's what I thought. I measured backlash again yesterday this time in the Neutral gear selection, I came up with .009, it's not that hard to overturn the pinion gear and easily get more backlash because of the turning of the wheels.
  14. R

    Is this normal backlash on rear wheels

    This question dawned on me last night. What is the correct gear mode to measure backlash? (P) PARK or in (N) Neutral. I rechecked backlash today, while in the PARK mode I got .008 thousanth's of an inch. I din't mention on any of my posts, the clutch pak im installing is the Carbon Fiber pak by...
  15. R

    GT 95 needing some horsepower improvements!!!

    Supercharge it. Heads, Cam, Intake can get you really close to 300.
  16. R

    Is this normal backlash on rear wheels

    I just finished doing a Differential trak lok install. I reused my old S spring because the new one that was supplied is impossible to install, heck I even had problems reinstalling the old one. I checked backlash on the big gear once I installed everything except the diff cover, I used a...
  17. R

    Problem with my differential ?

    There is definatlly no noise coming from the rear. I might end up changing the bearings anyway if the problem does happen to be the axle clutches.
  18. R

    Problem with my differential ?

    Got a problem with the Stang. I've taken my car tp two mechanics. The mechanic I took the car into recentlly, told me; my clutches in the axles/ differential where going out, he was putting in new breaks on the rear, and noticed the passenger wheel would'nt spin freely like the driver wheel...
  19. R

    Electric noise back of car?

    What part of UT are you located ? im in the ogden area.
  20. R

    T-5 swap. What year of parts can I use.

    I wan't to do a T-5 swap for my car. I can't find a 1994-1995 manual gt, but there are 1996-1999 v6's. I was thinking ow swapping whatever parts I can, and then later ordering the transmission from pro-motion, or prestige. Any of the electrical connections the same, Fork, fly whee, clutch...
Top Bottom
Back
Forums
Menu