Search results

  1. Stangstroke

    Forced Induction Planning Kenne Bell Install-what Else Will I Need?

    13lbs of boost i don't know how you ever got that when we set my car up without any kind of intercooler when we tried putting more boost to it we were measuring about 1.5lbs of vacuum on the inlet side of the blower after the throttle body which makes the boost counter productive. I was also...
  2. Stangstroke

    Forced Induction First Air To Water Intercooler Set Up For Kenne Bell

    I can't tell you honestly what the temps were but if the intercooler wasn't working i would have see my dyno numbers decreasing because as the motor heats up it would start pulling timing out and making less horsepower.
  3. Stangstroke

    Forced Induction First Air To Water Intercooler Set Up For Kenne Bell

    I will post some pics this weekend of the set up the car will also be in Car Craft magazine and once i know what issue it'll be in i'll let everyone know that also.
  4. Stangstroke

    Forced Induction First Air To Water Intercooler Set Up For Kenne Bell

    With alot of pain and suffering we finally finished the build with alot of $$$$$$ we now have the dyno results it made 505RWHP at 6000RPM's and max torque of 500ftlbs at 3000RPM's and flat right across the top it's an absolute monster to drive:). The 2.1 KB was swapped out for a 2.6 KB and with...
  5. Stangstroke

    Forced Induction Planning Kenne Bell Install-what Else Will I Need?

    On my car the max i could only get 8lbs of boost because of the stupid flowzilla design to many turns and bends not efficient at all and my intake temps and heat soaks increased alot could bearly drive the car on hot days.
  6. Stangstroke

    Forced Induction Planning Kenne Bell Install-what Else Will I Need?

    Husky 44 Unless your willing to spend a ton of money on this car as i have your best bet is to just add the basic KB with the standard intake and do the minimal upgrades the flowzilla intake on a stock motor won't give you much of a gain unless you find a way to cool intake temps via an air to...
  7. Stangstroke

    would it be worth getting tune?

    You need to get a dyno tune it's worth all the money you invested in heads and cam why pay for Horsepower upgrades if your not getting every last HP out of your purchase.
  8. Stangstroke

    Kenne Bell questions on a '94 Cobra

    You can buy all the KB's you want from KB direct they are located in Rancho Cucamonga California look them up and give them a call.
  9. Stangstroke

    Rim size

    Ok so you had to remove the Quad shocks and put a different offset wheel to make the 305's fit.
  10. Stangstroke

    Kenne Bell questions on a '94 Cobra

    The entry level KB set up uses a stock 5.0 intake but if you step up to the Flowzilla option you need the GT-40 manifold to make that one work i had to change that over on my set up.
  11. Stangstroke

    306ci crate in 94 Cobra?

    I agree with just doing a compression test or just take your car to good shop and put the car on the Dyno a somewhat healthy motor with that milage stock will make around 190RWHP if the motor checks out throw a blower on it. That's how i started i had fun with the car for a year before i decided...
  12. Stangstroke

    Rim size

    This is what i put on my car and it fits no problem Front: Konig Lace Size:18X8 Bolt Pattern:5X114.3 Finish:Gloss Black W/ Mirror Machine Face Offset: 35 Tire: P245/40R18 Goodyear Eagle F1 GSD3 93Y Rear: Konig Lace wheel size:18x9.5 Bolt Pattern:5x114.3 Finish:Gloss Black W/ Mirror...
  13. Stangstroke

    Questions about oil

    Oops i guess i should proof read things before i post my stuff, ya FUEL not water thanks Kurt. If you put so little miles on your car for the cost of an oil change me personally I'd still change my oil before putting it away but thats me.
  14. Stangstroke

    Questions about oil

    I use Moblie 1 in my motor but here's a bit of a tip do your tune up just before you store your car that way it's sitting the winter months with fresh oil and not dirty oil. Starting your motor periodically won't harm your motor but you need to let it get good and hot if you start your motor and...
  15. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    If i could get all my money back i'd buy a new mustang GT and throw a big KB on it and have 600rwhp and be done with it!!!!! I understand i had multiple options for my car when i started this but there's a certain cool factor to lifting the hood and seeing all the very trick stuff under my hood...
  16. Stangstroke

    TKO 600 Questions...

    I've got my T5 rebuilt with the Astro A-5 kit good for 480HP and 550 ftlb's i love it so far we will see how it holds up on my last dyno tune coming up this week shooting for between 480-500RWHP and 550-600 ftlb's we'll see how the tranny does Astro also sells one stronger kit than my kit...
  17. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Well back at shop the car is fabricating a new inlet side to the blower, new 90mm throttle body and getting rid of the flowzilla intake and fabricating a custom aluminum inlet. I'm shooting for about 480 to 500 RWHP and almost 600 ftlb's of torque we will see what i end up with in about a week...
  18. Stangstroke

    Who makes the best Coil over shocks for my 94

    Now i'm going to have to rely on the pro's to piece together a kit to give me what i need to acheive my goal.
  19. Stangstroke

    Who makes the best Coil over shocks for my 94

    I agree with all the stuff your reccommending but when i do this i want to do the whole shabang and save some labor and get everything installed at once.:nice:
  20. Stangstroke

    Who makes the best Coil over shocks for my 94

    I have a 3:73 Auburn posi with stock axles and i don't have CC plates and stock sway bars.
Top Bottom
Back
Forums
Menu