Search results

  1. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    The last dyno pull showed 383rwhp and 481ftlb's of torque not bad we'll see what we get after moding the intake here's a short video of my car. http://www.youtube.com/watch?v=neT4W-X27GE
  2. Stangstroke

    Gauge makeover, What do you think?!

    The odometer is easy to calibrate it comes with instructions but if you use a gps you can mark out a 1 mile distance to calibrate the speedo.:nice:
  3. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Yes your right but the elbow was opened up but still not enough airflow we'll be taking care of that soon.:nice:
  4. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Thanks alot Blackvert the car's a ton of fun to drive now!!!!:D I'll see about putting a video on youtube tomorrow of the car.:canada:
  5. Stangstroke

    Gauge makeover, What do you think?!

    Gauge set up looks very cool i like it:nice: I didn't want to go through all the trouble of doing that to my car so I went to Florida 5.0 for my gauge cluster set up all said and done for about $800 gauges mounted and bench tested ready to go and took me about 4 hrs of my time to install real...
  6. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Drove the car home last night what a monster out of the hole to about 5000 rpm the car just goes wow:nice: Now over the next couple of weeks I'll be modifying the flowzilla intake manifold and modifying to a 90mm accufab TB that should take care of any flow issues I'm having now. then I'll be...
  7. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Only able to run 7.5 psi of boost so far
  8. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Some pics:jaw:
  9. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Update the car has had some tuning issues the intake is restricting the motor from making the power it should so i'll have to work some more on the intake side of the blower like custom fab a 90mm throttle body and do some work on the flowzilla manifold to maximize flow the best numbers on the...
  10. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    I know i know but I'm really picking up my car today and should have the dyno results and picks posted shortly:rlaugh:
  11. Stangstroke

    MM Panhard Bar and Flowmasters, Will it fit? Tips?

    I think you'll be ok with running that tire size!!!:nice: I haven't got my car back yet from the guy that's putting in my intercooler for my Kenne bell SC should get it back this monday or tuesday can't wait should be 450rwhp I normally run the car at autocross events but want to see what she'll...
  12. Stangstroke

    MM Panhard Bar and Flowmasters, Will it fit? Tips?

    My 94 GT has MM panhard bar with magnaflow mufflers and stock tail pipes and 295-35-18's in the back and there's almost no room and even still under hard cornering the tires rub the tail pipes. If your tires are smaller you'll have more room to adjust your pipes to fit without hitting.:shrug:
  13. Stangstroke

    T-5 swap or Heads?

    My 94 GT was an automatic car and that robbed the car of any fun at all the biggest thing you can do is ditch the AODE tranny money well spent in my books.:D
  14. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    I've seen that guys set up and video on youtube it's awesome that's what motivated me to do something about my Kenne Bell. My car's putting 365rwhp and 385ftlbs (6-7 psi) when the cars at 195 degrees but as the temp rises i lose about 20-30 hp.:notnice: The car runs great right now tons of...
  15. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    I have an update the Kenne Bell manifolds and all the tubing for the intercooler should be back this wednesday and then hopefully thursday will be final assembly and then dyno tune thursday or friday which means I should have my car back this friday or saturday. Can't wait:nice:
  16. Stangstroke

    Car is STILL a slug...

    See listen to us get rid of the 2:73 gears and put in 3:73 it's a good all round gear:nice: Then ditch that tranny sucks the fun out of your car:( If you don't do those things first your throwing your money away for nothing and you'll still have a dog on your hands:lol:
  17. Stangstroke

    95 Mustang GT 5.0

    I agree with what's being said here just go get the car dyno'ed and see how it's running if alls good don't be scared of putting a blower on your car they work great and with a safe tune the car will last many years if you look after it.
  18. Stangstroke

    Car is STILL a slug...

    Man i feel your pain but 94 and 95's are total slugs especially with an automatic tranny and that gear ratio i had all those things going against me as well. If you want to wake it up a bit drop the 2:73 gears and put in a set of 3:73 that'll wake it up about as much as you can for one of those...
  19. Stangstroke

    95 Mustang GT 5.0

    Well up until this reply you didn't tell us what type of forced induction so now we know. Your stock motor as long as things are still tight (good compression not burning oil) your motor will handle 5-7 psi for awhile it also depends on your driving habits if you constantly pound on your car it...
  20. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    I went by the shop last night and the car is behind schedule at the moment all the tubing is welded up and in place the Kenne Bell manifolds are going out for polishing today and should be back by Monday next week then final assembly next tuesday and dyno tune and should be ready to pick the car...
Top Bottom
Back
Forums
Menu