Search results

  1. Stangstroke

    Any experience with Ram clutches?

    I would say if your worried about it call a shop that does alot of tranny work and ask them what they recommend for a clutch as if it doesn't work they'll be on the hook to fix it.
  2. Stangstroke

    How to build the most rwhp for $3500 I also want to hear the cam

    I agree with Blackvert you need to decide what direction you want to go but i think the best bang for your money will be forced induction of whatever you choose their are alot of good blowers out there just pick one.
  3. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Oh man that sucks I've not noticed any issues with my set up yet but it's all pretty fresh so far I've got about 2,500 miles on my motor and the guy that tuned my car made a hell of a difference on how my car runs perfect and idles we will see how things run after we add more boost and finish...
  4. Stangstroke

    95 Mustang GT 5.0

    How healthy is your stock motor have you put it on the dyno? A healthy stock motor makes about 185rwhp if your making that kind of hp and your compressions good try a blower and run it on your car until you burn down the motor and enjoy and then do a 306 or 331 stroker when your ready. That's...
  5. Stangstroke

    what is dashpot?

    hey how you doing? Good to read someone else has almost the same set up as i do. I had horrible drivability issues when my car was complete before the car got tuned and all of problems disappeared with the proper tune, my suggestion is to go to someone in your area that knows how to set your car...
  6. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    You almost sound more excited than i do to hear about the car but i'm on pins and needles waiting for the car to be done I called the shop and they are a little behind on the job and they are giving me a status update later today. Damn the car just can't get finished fast enough for me!!!:(
  7. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    I'll ask the question to the guy that's modifying my manifold but I don't see why he couldn't there's lots of room to put a sensor in the upper manifold.
  8. Stangstroke

    Any experience with Ram clutches?

    I've heard nothing good about Ram clutches the shop that did most of the work on my Mustang didn't reccommend the Ram clutch at all they have seen to many come apart they like the Centerforce and Mcloed clutches, Mcleod being the highend clutch. I had a centerforce dual friction in my car with...
  9. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    I should have all the info this week maybe I'll take a photo on the dyno sheet and put it in the post.
  10. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Can't wait to get it all back up and running this weekend!!!!:D
  11. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    1.The inlet and outlet tubes are 3" 2.The intercooler looks like around 30"X18"X3" it almost spans the distance between the bumper supports. 3.Yes as far as i know they have the same internals. 4. Flowzilla 5. 75mm BBK TB and a JLT cold air with a 90mm MAF
  12. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    Not at this stage I'm "bleep" deep into this now the Kenne Bell is lots of fun and i like the power it makes i know now that it would have been a lot cheaper to just buy a centrifugal SC with the intercooler but there's something about the KB that i like better it just has power every where...
  13. Stangstroke

    The ultimate SN95 5.0 exhaust thread

    Not sure who makes Stainless steel headers but the BBK ceramic coat headers are nice and a reasonable price too!!! You will also probably want BBK's catted X pipe and then run whatever mufflers and tail pipes you like from there. I'm running magna flow mufflers and reused the stock tail pipes as...
  14. Stangstroke

    Headers

    1994 Mustang GT with a T5 I've got BBK LT's on my car they fit well but are definately a pain in the butt to install but in my opinion worth the effort.
  15. Stangstroke

    331 stroker with 2.1 KB has anyone fabed IC

    I will be starting the car this weekend with the new air to air intercooler!!!!:D
  16. Stangstroke

    Wheel fit help for a 94 gt

    Every Mustang in the world has some spin off of the 5 spoke wheel boring!!!!:notnice:
  17. Stangstroke

    EVERYONE WITH AFTERMARKET WHEELS CHECK IN PLEASE!

    Front: Konig Lace Size:18X8 Bolt Pattern:5X114.3 Finish:Gloss Black W/ Mirror Machine Face Offset: 35 Tire: P245/40R18 Goodyear Eagle F1 GSD3 93Y Rear: Konig Lace wheel size:18x9.5 Bolt Pattern:5x114.3 Finish:Gloss Black W/ Mirror Machine Face Offset:25 Tire:P295/35R18...
  18. Stangstroke

    Dech?

    I like their stuff too!!! I have a 1994 GT and when I bought it I inherited a rear wing made from aluminum from Dech from what I understand it's very rare I've never seen another one. I read an article on it once an its a functioning air foil wind tunnel tested and at the time it cost around...
  19. Stangstroke

    The ultimate SN95 5.0 exhaust thread

    I guess it depends where you are? The Long tubes passed emissions no problem in Ontario Canada emissions are pretty tough there as well maybe not in California. I don't think longtubes and short tubes are going to make a ton of difference it's going to be in the tune of your motor that will make...
  20. Stangstroke

    Wheel fit help for a 94 gt

    Front: Konig Lace Size:18X8 Bolt Pattern:5X114.3 Finish:Gloss Black W/ Mirror Machine Face Offset: 35 Tire: P245/40R18 Goodyear Eagle F1 GSD3 93Y Rear: Konig Lace wheel size:18x9.5 Bolt Pattern:5x114.3 Finish:Gloss Black W/ Mirror Machine Face Offset:25 Tire:P295/35R18...
Top Bottom
Back
Forums
Menu