Search results

  1. Jacob_Royer

    Upgrades have started!!

    Just need to figure out this exhaust leak. also the cats seem to hang kinda low is this possibly a collapsed tranny mount? i replaced all the hangers with new ones.. also replaced passenger side flange gasket and sounds like the leak is from drivers side. sounds absolutely wicked outside the car...
  2. Jacob_Royer

    Upgrades have started!!

    Finaly got done yesterday. Had to jack up the motor to screw in the passenger side o2 sensor but once i set it back down it cleared the frame?? anyway the catted-x with flowmasters sounds absolutely awesome! and i picked up alot of top-end power the car runs so much smoother too! i believe the...
  3. Jacob_Royer

    Upgrades have started!!

    Not done yet... Stupid ford why did they put the top started bolt where they did?? that was a royal pita! took every extension i had and running through the frame mount for the engine! so gay! i hope i never have to take that bolt out again! got past that ordeal dropped the tranny took the...
  4. Jacob_Royer

    Upgrades have started!!

    Chatter? did you not have your flywheel ground? ive got several clutches from ky clutch over the years with no problems. infact i put 100k+ on one of them. What part of southern IN you from? im in paoli myself
  5. Jacob_Royer

    Upgrades have started!!

    Got all my parts together +gaskets all new hardware hangers etc! tommarow morning the fun begins! picked up a magnaflow catted X and a set of motorsport shortys for $50 also my clutch was about shot (adjusted all the way out felt like driving a dump truck) and picked up a king cobra clutch from...
  6. Jacob_Royer

    Sonic Blue GT and Mystic Cobra Photoshoot **56k go to sleep**

    Sweet cars! why was there a pic of the back end of a probe in there?? ohhhhh i see now somone must have stole your spoiler! you need to find another one! :D Seriously nice cars expecialy the cobra! but you really do need to put your spoiler back on 94/98's look like ford probes without...
  7. Jacob_Royer

    Header bolts help!!

    How long? im installing a set of motorsport shorties dont know if that makes any diffrence on the length.
  8. Jacob_Royer

    Header bolts help!!

    M8x1.25 ????
  9. Jacob_Royer

    Header bolts help!!

    What theads/pitch/length are the header bolts? 3/8x16x1? or are they metric??? please help i need to replace a few!
  10. Jacob_Royer

    CFI to Carb

    Thats the one!
  11. Jacob_Royer

    CFI to Carb

    Search ebay for 302 HEI there are some nice setups that use GM module/coil/cap much easier/simpler/better than the ford ignitions of the time and these drop right in!
  12. Jacob_Royer

    5.0 swap/build questions?

    Ok bought the following 87 roller motor out of a lincoln TC 50k on it! GT-40 heads E-303 cam Malory lowpressure by-pass adjustable fuel pressure regulator Ford HEI distributor Edelbrock 650cfm electric choke carb B&M 2800rpm stall tourque convertor 3.73 rear-end already built with...
  13. Jacob_Royer

    Shorty headers catted X ?'s

    Would UD pullies be a good upgrade too? Ive already done the PI intake and i can get some PI cams for $40 localy would they be worth it or would it be better to wait till i can get ahold of some PI heads?
  14. Jacob_Royer

    Shorty headers catted X ?'s

    I know its a steal of a deal. My buddy has always been cheap. He recently replaced both CV axles and balljoints both sides of dads accord for $100 labor. Good work and good prices. He has not been getting much bussiness going yet since he opened his own shop and is off the beaten bath. hopfuly...
  15. Jacob_Royer

    Am I wrong ....

    IRS is the ****at! and ford did it right! never got a chance to drive a IRS stang but I've owned a IRS Tbird supercoupe for years and the handling/ride is friggin awesome! a few Nitroused 460's in tbirds still running stock IRS no problems. I'm building a 347 for my bird right now and have no...
  16. Jacob_Royer

    Shorty headers catted X ?'s

    Im getting my clutch done in a few weeks since i havent had time to work on it buddy has a garage and hurting for $ right now charging me $200 labor for clutch/headers/midpipe install me providing all the parts.. probably easier to do with the tranny out anyway!
  17. Jacob_Royer

    Shorty headers catted X ?'s

    Im hoping to pick up some power/mileage. I drive this thing 750 miles a week! hopfuly it wont be droney with catted X and AT catback. right now its to quiet! anyone of a clip of catted X flowmasters shortys?
  18. Jacob_Royer

    slow mustang

    +1 on the PI intake!! Best mod i ever did to my mustang! My friend has a 2000 with 4.10's Bassani catted X-pipe and catback and he pulls me from 55 i can pull on him not much but a little.. Before he just raped me from a stop raped me from a roll raped me from 55 you name it. I actually have a...
  19. Jacob_Royer

    Unusual exhaust question

    My friend is running OR h-pipe with stock catback and not only is it fairly quiet it has a very good and very unique sound to it.
  20. Jacob_Royer

    Shorty headers catted X ?'s

    Getting a set of motorsport shorty headers and a catted magnaflow X pipe from a guy at work that upgraded to LT's and OR for $50!! Can i expect any gains from this setup? i already have PI intake CAI and AT catback. stock midpipe has almost 200k on it im sure the 6 cats have seen better days...
Top Bottom
Back
Forums
Menu