Search results

  1. BadMoFo

    BF pulley and idler swap, came with no instructions

    its all done, peice of cake, but now having trouble getting my custom tune to download from the cpu to the predator.
  2. BadMoFo

    BF pulley and idler swap, came with no instructions

    need to know how to do this swap as the box came with no directions. I have a link for the pulley swap but nothing for the idlers or idler bracket. can someone give me directions or a link, preferably with pictures. thank you.
  3. BadMoFo

    Auxilary power in center consule

    heres something to try, its called the owners manual. did you pull the fuse for the cig lighter to see if it was blown?
  4. BadMoFo

    Can't do a burnout

    it just takes a little bit of practice, sometimes your good at it other times your not. I know I am still working on mastering it in the 03, had it down good in my 99 cobra and 00 gt but for somereason I keep stalling out or frying the clutch in the 03.
  5. BadMoFo

    A two part ? Super Unleaded Gas & A Shift Light

    dont know anything about the gas question. but for shift lite raptor, just installed mine last week and it was cake.
  6. BadMoFo

    Autometer gauge cluster

    they look good but not worth spending 400+ on. thas probably why the stopped selling them, cost to damn much. but I will give it that it does look sweet, but I would rather spend my money elsewhere for some speed or something.
  7. BadMoFo

    Can you get a different MAF with the JLT CAI??

    did your new maf work with your stock application? if so then it will work with the jlt rai/cai.
  8. BadMoFo

    Hmm Which Shifter??

    get the mgw and be done with it. I am not a tall person nor do I have long arms and I have no problems what so ever reaching my mgw. I have driven with the steeda triax and its taller than the mgw but if you were to set and compare both side by side int he car, shift with them, you would get...
  9. BadMoFo

    If buying a used Cobra would already installed mods be appealing?

    I would love to buy modded but you wonder how well the person did it and how hard they beat on the car. but in the long run it saves the buyer time and money cause it already has mods. I've discovered that looks modded sells better than performance.
  10. BadMoFo

    Gonna get a shifter - which brand?

    have driven with upr, steeda triax and now mgw, mgw wins hands down no contest.
  11. BadMoFo

    Local Dyno in Greenville SC area?

    planning on installing my pulley and tune this tue and was wondering if there was a local dyno that can test A/F ratio in the greenville sc area? just dont feel comfortable taking it to the track without that warm fuzzy from knowing you have a good a/f ratio. thanks.
  12. BadMoFo

    Cold Hard Cash $$$ Burning my pocket

    go to autotrader.com, they have alot of choices there, that what got me the most replies when I sold my 99 cobra before I got my 03. me personally if you are stuck on those years I would go 98 just cause its just a little newer, still a 7 year old car but I am sure there are some good ones left...
  13. BadMoFo

    Diablo Tune

    you should wait until after you install your gears because if you dont you are going othave to send off the chip again to have it reburned for your gears. just install the gears and other stuff then burn the chip, with the few mods you have a chip isnt even worth it now.
  14. BadMoFo

    18" Rims on 01 Cobra

    thats what I ran on my 99 cobra with 18x9 saleen replicas. worked out well.
  15. BadMoFo

    thats not good

    I took it completely out and there are bolts on the back so it looks like you can take it apart and maybe replace one item but it looks like it would require you removing ALL the needles and I am just not going to take the chance. you can see where the needls sets on a cog and if I could get...
  16. BadMoFo

    thats not good

    well doing my boost overlay today and got to the remove needle part, used the tool to pry off the needle and then I noticed the copper needle the plastic need attaches to was in there all limp. went ahead put the sticker on and reenstalled the needle to see maybe if that was...
  17. BadMoFo

    anybody mounted a 285/35/18 NittoDR on a 9"?

    I mounted the regular nitto 295x35x18 on a 9in. heck have 315's on my 9in rim now.
  18. BadMoFo

    3.73 or 4.10

    4.10's.
  19. BadMoFo

    Best/cheapest off-road H pipe?

    :stupid: would love to say where the cheapest place is but I got mine local everytime, 3rd stang I have put mac o/r h pipe on, and this one cost me $128.
  20. BadMoFo

    lowering?

    going to have to figure in cost of springs around $200-$350 then labor, I want to say it cost me $85 the last time I did mine. but all depends on what springs you buy and where you take it to.
Top Bottom
Back
Forums
Menu