Search results

  1. flstang65

    Remote Hood Latch?

    I think I might try this out as well whenever I get around to my 65.
  2. flstang65

    66 T5 And 8.8 Swap. Drive Shaft ?

    Just try em both out. If one of them work, cool. If not, you care going to have one made.
  3. flstang65

    66 With T5 And 8.8 Swap. Driver Shaft?

    Measure from the pinion flange to the tailhousing of the tranny. then, measure how much the output shaft sticks out. double check to your driveshaft. if that doesn't work send your measurements to your local driveshaft shop to have one made. they aren't that expensive to have made.
  4. flstang65

    Replacing Abs Sensor On 96 Gt

    Once you can get it out you can go to the hardware store and match up the threads and length and get a standard bolt with a small lock washer and you should be ok.
  5. flstang65

    Mach 460 Left Side Not Working

    wierd. sounds like a wiring issue. im lost man.
  6. flstang65

    Is This Factory, Or Aftermarket?

    Looks like factory chrome plastic to me
  7. flstang65

    Using Rtv To Make A Gasket.

    I use this with the handy dispenser: http://www.valco-cp.com/Hylomar.htm http://www.valco-cp.com/All-In-One%20Silicone.htm
  8. flstang65

    Using Rtv To Make A Gasket.

    The price keeps me from using it.
  9. flstang65

    Replacing Abs Sensors

    :word:
  10. flstang65

    Accuracy Of Sct Livewire

    I thought it could read it off the car computer?
  11. flstang65

    Rear Brake Install 2001 V6

    Freebie brake job? Is said damsel in distress hot?
  12. flstang65

    Mach 460 Left Side Not Working

    Could the head unit be bad?
  13. flstang65

    Mach 460 Left Side Not Working

    could the speaker itself be bad? check the wiring in the door all the way up to where it goes into the cabin.
  14. flstang65

    Need New Window Guide Bushing. Please Help

    :stupid: I might even be able to snag one when I go to the junkyard again this week for you.
  15. flstang65

    Mystery Coolant Leak, 1996 V6 Engine

    Disregard my comment about the intake earlier, that applied to the V8. I did not see you had a V6. I would still look into the heater core also, has anyone actually pulled any of the spark plugs and looked down into the cylinders? If it is a bad head gasket or intake gasket then, the coolant...
  16. flstang65

    Need New Window Guide Bushing. Please Help

    MPS
  17. flstang65

    Few General Problems........

    If they are original, couldn't hurt to do the steering rack bushings as well. Don't forget to bleed the master cylinder as well.
  18. flstang65

    Need New Window Guide Bushing. Please Help

    Junk yard or MPS Auto Salvage. Maaaaybe Late Model Restoration?
  19. flstang65

    Mystery Coolant Leak, 1996 V6 Engine

    If it is the manifold, get the Ford Racing or OEM one with the metal cross over. DO NOT get the Doorman replacement. It will cost you horsepower and it is more of a universal type fit. Where are you losing coolant? in the overflow reservoir or the radiator it self?
  20. flstang65

    Clutch Question...what Would You Do?

    You can get a tranny plug at Advance, Harbor Freight, ect.
View older results
Top Bottom
Back
Forums
Menu