Search results

  1. H

    71-73 C6 cooling line ?

    I posted new pics in my gallery. Check it out.
  2. H

    1972 Factory tach accuracy compared to aftermarket

    I was making suggestions to keep it looking "factory". You could use you high beam indicator or the a light in the dash next to your light switch.
  3. H

    71-73 C6 cooling line ?

    no mod on the plenum. I just couldn't see spending $1,000-$1,500 for a real ram air on a non-concourse car, so I made one. I made the ring for the gasket and eliminated the snorkle. I'll try to get pics up over the weekend.
  4. H

    1972 Factory tach accuracy compared to aftermarket

    Pretty close woops
  5. H

    1972 Factory tach accuracy compared to aftermarket

    Pretty close It's actually pretty close on the reading. I used all the Mach gauges, but ran a volt, oil pressure and temp gauge into the glove box. You might look at putting the shift light down by the headlight switch. The factory had a red "brake" light in a hole next to the switch. You...
  6. H

    71-73 C6 cooling line ?

    BTW I think you'll like to see my ram air hook up. I made it out of a 429 Lincoln filter and added 1/4" of height to work with my Edelbrock Performer (which was lower and didn't allow it to seal against the plenum). I'm painting this weekend.
  7. H

    71-73 C6 cooling line ?

    Sounds exactly like mine. Even the rub against the pan. THANK YOU! Seems like you and I are the only two guys on here with 71-73's sometime.
  8. H

    71-73 C6 cooling line ?

    Thanks Svend. Someone at VMI said the same thing, no body attachments, just the clips. Check out my gallery. I have pictures of my cars on there now.
  9. H

    71-73 C6 cooling line ?

    Bump Anyone?
  10. H

    71-73 C6 cooling line ?

    Can any 71-73 folks tell me if and where the cooling lines are clamped to the car underneath. Pics would be great, but telling me would be helpful. THANKS!
  11. H

    Liquid masking tape

    Thanks. I'll probably try to hobby shop before the adult shop, or should I...
  12. H

    Liquid masking tape

    has anyone ever used any type of a liquid masking tape to paint interior pieces like the dash? What did you use and how did it work? THANKS!
  13. H

    Mustang II suspension on a 71-73 Mustang

    Most folks don't do this to 71-73's as the engine compartment is large enough for a big block and the steering assembly is better than previous years. If you must, I'd go with rod and custom's kit (http://www.rcmotorsports.net). Ask for Willie.
  14. H

    Interior lights voltage ? (71-73)

    What? No one likes electrical work? No one has an answer on this?
  15. H

    Interior lights voltage ? (71-73)

    I have 12v on battery, ignition and yellow in to headlight switch. I drop to 11v (max turn to left) or a bit less on interior light feed (lt blue). Probably not a big deal, but is this right and any idea why its doing this if not right? I do have a new headlight switch FYI. THANKS!
  16. H

    won't start

    yep, just like Madbrad says...
  17. H

    Mallory Unilite module

    I'm thinking you don't need one using the Pertronics, not sure though.
  18. H

    won't start

    battery or ground have you tried jumping it from another car? That clicking sound really makes it sound like a battery, ground or the starter relay.
  19. H

    Mallory Unilite module

    Resistor Yes- I believe you need a ballast resistor.
  20. H

    no spark @ plugs

    how do you know you have spark at coil?
Top Bottom
Back
Forums
Menu