Search results

  1. allutz

    2002 Mustang GT - Installing Sony Head Unit to Mach 1000 System

    hey....kind of a late reply and a tiny bit off topic......but what are you doing with the stock unit???? looking to sell maybe???
  2. allutz

    PI headswap first start....BIG PROBLEM HELP!!

    the spark plug helicoil set comes with a stepped down tap with 2 sizes on it...the first step on the tap is the same size as a spark plug so using whatever is left of your threads it will start the tap straight...the second step to the tap is the bigger size to thread the hole for the...
  3. allutz

    PI headswap first start....BIG PROBLEM HELP!!

    put grease on the tap when you heli-coil the plug hole...the chips will stick to the grease.....just go slowly and a little at a time ....also, maybe pull the tap out every so often to clean it off and put fresh grease on it.......ive done many plug hole taps this way over the years and have...
  4. allutz

    Strange no start problem

    just something basic to check.....make sure batt. terminals are tight....
  5. allutz

    PA guys.. how strict is your inspection?

    hey guys.....just to let ya know, they added the visual to state inspection requirements. so if your car is 5000 mile exempt you still need to pass state inspection with the required emissions equipment for that vehicle...example....the 88 mustang gets a 5000 mile exempt sticker no problem...but...
  6. allutz

    Shaker 1000 comments, how does it sound

    :stupid: The thing i like is i dont have to mess around with stereo stuff any more...did enough of that back in the day.....while am/fm doesnt sound all that great.....most cd's do sound awesome with little or no distortion...i ordered my car in sept o1 with the mach 1000 and have not regretted...
  7. allutz

    Misfires

    what codes are coming up???? is it random cylinder misfire(300) or a specific cylinder???(301-308)
  8. allutz

    Cylinder 1 misfire after pi swap.

    wouldnt hurt to look for a vacuum leak at the cyl. #1 intake runner.....did you replace the intake gaskets too??? it doesnt take much of a leak to set a lean or misfire code...
  9. allutz

    Lets meet up one more time this year...heres my idea...

    where the heck is matamoras , pa. ?????
  10. allutz

    Meet in N.East Jersey

    hey...i have alot of family in the clifton/wayne area.....set a date and i can try to make a weekend out of it!!!!!
  11. allutz

    Bank 1 Bank 2

    yes.....bank 1 is passenger side
  12. allutz

    Trans question...throw out bearings

    did you guys get the tob on warranty??? Mine is squeaky too....if its not covered ill just do it myself....
  13. allutz

    Kenne Bell 9psi Rocks!!!!!

    :D anyone have 6 grand they can lend me???:D
  14. allutz

    gt problum

    try cleaning out the iac motor. it is located on the side of the throttle body. use a can of carb cleaner. also, check for vacuum leaks....good luck!!!!
  15. allutz

    New exhaust - Will it void my warranty?

    no cats will kill the warranty....
  16. allutz

    Tri-ax is a little loud, anyone else have this issue??

    I got the mrt shifter and also noticed noise right away......take the good with the bad.....
  17. allutz

    Powder Coating in SE PA

    try alackness powder coating....in royersford pa...2nd ave...ill get the # if you cant find it......i drive by there on my way to work everyday.....he used to be an auto repair shop but closed down to do powdercoating.
  18. allutz

    2v to 4v swap, is it emissions legal?

    i know in pa......that the car is tested as if it was origional......as long as it has all the emissions equipment then it should pass.....especially the obd2 test.....hope this helps......
  19. allutz

    CD Stuck In CD Player...What Can I Do?

    MAN PROSECUTED AT BEST BUY:BURNED CD'S AT HOME :rlaugh: :rlaugh: :D
  20. allutz

    BBK LT's and X-pipe question for PA residents.

    96 and up vehicles dont get a visual in certain counties with the new obd testing being done.....however, if your check engine light is on it will fail the obd test....therefore if your light is off and there are no faults in the pcm....you'll most likely pass the obd test(in certain counties)...