Search results

  1. apollo12

    Edelbrock 6025 performer heads help

    What size intake valves do the heads have?
  2. apollo12

    5.0 Coupe

    Good find and good luck with the Mustang!
  3. apollo12

    Photo Request. 1987-93 Black seats in a Black/grey two tone interior.

    Many people change only the front seats,how much are the seats?
  4. apollo12

    18 degrees

    55 here and the temp will drop to around 30 tonight
  5. apollo12

    351W stroker in a fox

    The trans and bellhousings are the same, a stock computer will work and clearance may be a problem depending on which motor mounts you run.I'd just get a cowl hood
  6. apollo12

    best flowing iron heads

    agree 100%
  7. apollo12

    troubleshooting, EEC relay?

    Was the Mustang running before you put the fuel pump in? on the fuel pump relay you only need one wire to jump the switch. Sounds like a bad computer,do you have an extra computer to try?
  8. apollo12

    throtle body compatibility? and egr questions

    Just make sure you have lots of good grounds!(EFI needs good grounds)
  9. apollo12

    351W stroker in a fox

    You will need Mustang Foxbody351 headers,351 oil pan,351 lower intake,351 fly wheel,and balancer for that year engine. What year engine? and will you be running efi?
  10. apollo12

    Congratulations 25thmustang!!! (2009 FOTY winner!)

    Congrats,your Mustang looks great!
  11. apollo12

    T.B and pulleys worth it on near stock 5.0?

    I'd do the pulleys and a K&N filter, then a explorer intake or cobra, then bigger air meter,65 TB/ EGR spacer.
  12. apollo12

    fuel problem

    First off did you pull the codes?
  13. apollo12

    speed density to mass air?

    I would have a complete 1989 mass air set up, which is the only one you can use (86-88 uses the 1989 mass air harness)
  14. apollo12

    Found A UFO in my AOD pan - help!

    Is it part of the filter and can you snap a pic?
  15. apollo12

    AOD shifting issues!

    What did the transmission shop say was the problem? and does the trans fluid have a burnt smell to it? and who put the kit in the trans?
  16. apollo12

    headlight aiming help and 9004 to 9007 questions

    I adjusted mine while the lights were on the car
  17. apollo12

    So I bought a B303 cam............

    b303 with 1.7 will be .510 lift
  18. apollo12

    headlight aiming help and 9004 to 9007 questions

    Adjustment's are made by adjusting the (3) 5/32 heads on the rear of the light housings.I adjusted mine in the past,I did it on level ground and shining the lights on a wall of a building.I think I was about 20 feet away but I'm not sure
  19. apollo12

    Replaced Fuel Pump Still Won't Start

    Welcome to the site! I had a problem like that with one of my mustangs, it was a bad fuel pump relay and bad ign switch
  20. apollo12

    So I bought a B303 cam............

    Sounds like a nice set up,straight up will work fine.If you use 1.7's with an e303 cam your lift will go from .498 to .529 lift
Top Bottom
Back
Forums
Menu