Search results

  1. Stang951

    Electric fan and stock???

    It might actually cool worse. You have two fans that might be fighting each other. Electric pushers are usually used in conjunction with other fans, and generally are placed offset from each other to stop one from robbing the other's airflow. You also need to ask yourself why the fan is not...
  2. Stang951

    Could you please list your aftermarket control arms and if you are satisfied

    MM all the way. I bought and installed the adjustable height' with the poly chassis bushing and spherical axle bushing and love them. No wheel hop like before. I do hear the rear end more than I think I would with the stock arms, but it could be the rear-end's close tolerances in the gears...
  3. Stang951

    MSD Pro Billet Distributor = JUNK!

    Most of the time (probably because of the old technology) MSD equipment is really sensative to power surges and spikes. I installed their noise suppressor (really a small capacitor) inline of the 6AL and have not had another problem. 30.00 fixed all of my problems this time. However if it ever...
  4. Stang951

    New motor mounts

    Sounds more like Stang8URMPRT said. The olds ones were probably worn out and sitting lower than the new ones.
  5. Stang951

    that didn't sound good.

    Actually that is not true. Donkey what did the noise sound like? Was it a terrible grinding metallic noise that sounded like something was being chewed to hell. If it was the starter went the the great Ford started heaven in the sky. Mine did the exact same thing. Only I was leaving to do some...
  6. Stang951

    where to find blower for a carbd 302

    So Smock, where did you get your set-up? I was thinking of supercharging my 351W. At first I wanted the Holley screw charger, but they dont make them for the 351, so I kinda have to go with the centrifugal.
  7. Stang951

    what years timing covers interchange?

    The timing covers are all the same except for the fuel pump boss. Some have them open and some have them closed. The ones that are closed are from a fuel injected car that had the pump in the tank. You can get either, but if you happen to end up with one that has the open boss you will have to...
  8. Stang951

    Spec aluminum flywheel and alignment pins HELP!!!

    Sounds like you need to call SPEC. I didn't have any problems at all with their kit. I went with the aluminum flywheel, and Stage II kit.
  9. Stang951

    question on installing new battery wires

    No pretty simple just remember the routing of the old cables, and be sure to get good quality cables when you buy them.
  10. Stang951

    LX pipes needed for Cobra bumper???

    Go with the stainless if you can. You can shine them up just as good as chrome and you wont have to worry about rust as much. If they do rust just hit'em with a brillo type pad.
  11. Stang951

    Show me piks of your dual and triple gauge cage,with and with vent!

    They are the MAC's. I got them from 5.0Resto. They were easy to install. Even upgraded to a 140 Speedo when I did them. I have info on the 140 swap on a web page if anyone needs it. http://personal.msy.bellsouth.net/j/p/jp951/140mph_gauge_swap.htm
  12. Stang951

    Show me piks of your dual and triple gauge cage,with and with vent!

    Autometer here.
  13. Stang951

    Fiberglass hoods....Pins yes or no?

    Actually you named them right, they are security looks. I believe Mr. Gasket even has a warning no the package that they should not be used as a preventative for hoods flying open. All they are for is to keep people from diggin under your hood. I wouldn't trust those if I were you. I have seen...
  14. Stang951

    EFI 351W won't rev past 6000 - HELP!

    Sounds like ignition to me. You may also want to check and make sure that you are getting enough voltage to the distributor and the ignition box at around that RPM. Definitely soudns like ignition though.
  15. Stang951

    EFI 351W won't rev past 6000 - HELP!

    Double check all of your plugs and plug wires. I had a similar problem with falling on its face. One night when I got back from a cruise night, I looked under the hood and found out that the 5 and 6 plug wires were arcing to the headers, and the number 5 plug was cracked. Made pretty little...
  16. Stang951

    Cobra Rear Bumper(s)

    The Cervini's (at least mine) has a hole in the side to bolt it to the body. Mine also has the 10-12 bolts along the trunk, and come out of the long metal support under the bumper. All of those are tight, but somehow the bumper pulled away from the car in that spot. I would say someone hit it...
  17. Stang951

    Power Steering Help

    Not sure what years, but I have seen some with external reservoirs. You might also want to look at one of the mod motor pumps, they may be smaller also and adaptable.
  18. Stang951

    Autolite 24's or 25's Plugs???

    Whats the difference in the heat range between the two plugs? I didn't think one point would make that much of a difference.
  19. Stang951

    Power Steering Help

    Just an idea, but since building a bracket isn't an issue for you, how about using a newer pump with a seperate reservoir. That way the unit itself will be smaller. You would just have to route the lines a little different.
  20. Stang951

    Dash apart, replacing heater core...what else?

    I would replace the blower motor while your there too. Especially if it isn't blowing full blast.
View older results
Top Bottom
Back
Forums
Menu