Search results

  1. MustangDanny

    what is klasse reallly?

    This is in a group of products referred to as AIO (All-In_Ones). Other examples of AIOs are Optimum Poli-Seal, Duragloss #101, Poorboy's Polish w/ Sealant, etc. Basically the way these products work is they have a mild polish or cleaner (either a mechanical abrassive or a chemical cleaner)...
  2. MustangDanny

    buffer pad questions

    With that kind of buffer I wouldn't expect to get any significant cutting (correcting) power. I would say the best you can achieve would just to wash, clay and work the Klasse AIO in with the buffer on each car. If you want to correct defects like swirl marks I would look into a Porter Cable...
  3. MustangDanny

    what is klasse reallly?

    Klasse makes a whole line of detailing products. Which one are you talking about? Klasse Products
  4. MustangDanny

    What instant car show clearner/prep do you use?

    Shine a halogen light on it and you'll see what is there.
  5. MustangDanny

    Detailing and Paint Correction on my 99 Cobra

    Here is what that rear wing looked like before the wet sanding and polishing: And here's what it looked like after the whole deal... And finally, some misc. afters: And a nice water beading shot after the detail...
  6. MustangDanny

    Detailing and Paint Correction on my 99 Cobra

    I wet sanded problem areas with 2000 grit. I've seen these kinds of scratches in most cars because of the gas cap dangling on the paint. WET SAND!! Compound! POLISH IT! I also wet sanded the whole rear wing and trunk lid because there was some major water etching...
  7. MustangDanny

    Detailing and Paint Correction on my 99 Cobra

    I've been doing some heavy detailing and corrections on my black 99 Cobra. I just love working with black cars! The results are always worth the work! Anyways, I have several pictures that span several detailing sessions. I basically tackle one area at a time since I usually do not have the 8 -...
  8. MustangDanny

    swirls on black stang

    Take it to a pro dude. It isn't worth screwing up your car over. Take a look at what I did to my Cobra to get defects out... it's not picnic! Takes a lot of professional chemicals and tools and most of all... know how. My Detailing Write-Up
  9. MustangDanny

    What instant car show clearner/prep do you use?

    OMG! California Dusters!?? <=== Swirl Mark Generator!
  10. MustangDanny

    Brake rust on rim?

    Order some Meguiar's Wheel Brightener. Dilute 4:1 in a spray bottle (WEAR GLOVES!) and watch that stuff fall off!
  11. MustangDanny

    Pics of new Headlights

    Sorry to dig this one out of the dead, but I jsut wanted this post to become a consumer warning. I wrote up my experience using the eBay "guild" system. Here is a link if anyone is interested...
  12. MustangDanny

    1999 cobra guys help me!

    Fo with a JLT CAI and a good x-pipe. That will really wake up the breathing department and you should notice some good performance gains. But I think that all 32V guys will agree that the single biggest difference is the rear gear. Go with a 4.10 at MINIMUM.
  13. MustangDanny

    How many miles do you have on your cobra?

    96,000 on my 99 cobra. Driven hard daily!
  14. MustangDanny

    Pics of new Headlights

    Just age I guess. Probably living inthe south doesn't help with all the big kills on the front of the car that I have to deal with. But lense fade is pretty common with Mustangs.
  15. MustangDanny

    Pics of new Headlights

    My stock lenses were looking real bad lately so I picked up a set of new ones from eBay. Let me know what you think. Old headlight New headlight Old vs New Haven't tried them at night yet, but I'm looking forward to it. Hopefully I will be able to actually see...
  16. MustangDanny

    Electrical problem? - Not PATS (LONG)

    Well Murphy's law kept me from going and spending $140. I started to check around the engine compartment for loose grounds and sure enough, one of the smaller wires that go into the negative terminal was loose (only two strands were connected). Must have happened when the new battery was...
  17. MustangDanny

    Electrical problem? - Not PATS (LONG)

    Well Murphy's law kept me from going and spending $140. I started to check around the engine compartment for loose grounds and sure enough, one of the smaller wires that go into the negative terminal was loose (only two strands were connected). Must have happened when the new battery was...
  18. MustangDanny

    Electrical problem? - Not PATS (LONG)

    I need help! Let me start from the beginning. I will try to include all relavent information. A few months ago I had to change my battery (original battery just got weak and died). After getting stranded because the car wouldn't crank, I got a jump and went to buy another battery. The problems...
  19. MustangDanny

    Electrical problem? - Not PATS (LONG)

    I need help! Let me start from the beginning. I will try to include all relavent information. A few months ago I had to change my battery (original battery just got weak and died). After getting stranded because the car wouldn't crank, I got a jump and went to buy another battery. The problems...
  20. MustangDanny

    K&N Oil Filter, Is it worth it

    Like I said guys... pull a sample out of your next oil change and send it in for testing. You'll be amazed about how much money you are wasting. Money better spent on MODS!
Top Bottom
Back
Forums
Menu