Search results

  1. S

    Tell me I didn't just waste a bunch of time/money!

    I just did my garage too and we used a 50 amp breaker for my compressor and welder. I used a licenced electrician that also teaches at the community college.
  2. S

    SERPENTINE belt conversion

    I have a regular fuel pump with my serpentine setup. I used a '90 Mustang brackets with the 351 Motorsport swap brackets. I have the PS and AC with no big headache with the fuel pump.
  3. S

    New guy needs header clearance info

    I had to go with FPA because of my PITA GT40P heads. They are pretty snug and have never bottomed out but currently have a stock height
  4. S

    Q: Remove rust from chrome wheels?

    It will take light rust off ;but the rust will come back.
  5. S

    Any Sugestions on a rear away Bar for 67

    I have a new rear sway bar kit from American Pony that I am not going to use. PM me if you are interrested. http://www.americanpony.com/store.mv?p=700010
  6. S

    Brake Warning Light Came on.

    I thought with a 4 wheel disc setup you would take out the stock distribution block and just install an adjustable proporioning valve for the rear? Either way you will probably just have to diconnect the wire for the brakes.
  7. S

    '67 Factory A/C

    Vacuum diagrams?? http://www.hammar.dyndns.org/~djhamma/wiring.htm
  8. S

    Stripe options for '68 w/ hood turn signals?

    I bought my 67 shelby hood from the guy in Tulsa. Spend the extra money and get a quality hood.
  9. S

    Stripe options for '68 w/ hood turn signals?

    Dave, give me a call. I still have that rough shelby style hood and I am in need of a turn signal.
  10. S

    Should I switch to Electric Fan????

    I went electric but definitelty wire in a relay
  11. S

    Big block and cheap

    Get a 4 banger fox body Mustang for next to nothing and drop a big block into it. About 10 years ago I did a 4banger coupe to 5.0 swap. Very easy swap and really cheap to find an 8.8 rear. One suggestion is to move the engine back as much as you can and that will help you hook up alot better.
  12. S

    Fiberglass Hood -- to pin or not to pin...

    Just take your old hood spring out and go to Home Depot and buy some trampoline springs of the same lenght. Believe me they work very well at 1/4 of the cost. If you have a really nice paintjob then go with pins. Otherwise at high speed the hood will flap enough to crack your paint and...
  13. S

    Fat person in the trunk somewhere?

    Just buy new rear leaf springs. The KYB hard as a rock shocks in the front can be literally pushing down your rear end.
  14. S

    Help me pimp out my VAN

    One way to make a definite enemy is to pick up your girlfriend in that van. Her dad knows what "party vans" are all about. Whatabout make a true homage to cheesey designs and make an "Eleanor Econoline"
  15. S

    Vibration above 45mph after T-5 Swap

    I had the same problem after my swap and I ended up adding a thick flat washer between the tranny mount and the crossmember. This raised the back of the tranny just enough to stop the vibration. I would always recommend getting the driveshaft balanced with the yoke and ujoints.
  16. S

    Quarter Skins

    I paid $450.00 on ebay see seller Item number: 7522658655
  17. S

    Quarter Skins

    BigDaddyCee, thanks for the reply. I figure the quarter skins are on $75 each and the outcome will be alot smoother and bondo free. Does anyone else have any welding tips for joining two panels for a newbie?
  18. S

    Quarter Skins

    I just bought a Lincoln Pro Mig 175 for the floor pans and to weld in some subframe connectors. I have never welded and I will get alot of practice on some scrap metal before I start burning through the new sheet metal. My question: Is it too aggressive of me to even attempt to replace the...
  19. S

    Need (factory/dealer installed) Air conditioning info

    yes on both factory installed ac is in the dash dealer installed ac is similar to the 66 model- under dash. Check out the 50plus 67's on ebay and you will see what factory in dash units look like.
  20. S

    Thinking of getting a Roller 351

    After getting a late model roller 351 just remember you may have to change out the harmonic balancer or use the serpentine setup of the new engine. I ended up using 1990 5.0 brackets and the ac/ps 302 to 351 swap brackets sold at Summit.
Top Bottom
Back
Forums
Menu