Search results

  1. BarnStang

    66 Paint Color Question (dark Candy Apple Red?)

    I just discussed this very question with the paint guy doing my 66 (almost ready!) I would prefer the darker candy apple red myself. He said that you can use a pure white base as in the post previous or a gold base to make a richer deeper candy apple color. Thats what I am going for. He is...
  2. BarnStang

    66 Mustang Data Decoding

    I am finally down to the last of the metal work on the 66 project. I need some confirmation of my information. I am missing the door data plate. But I actually have the core support tag with the matching vin number. Matches both fender aprons and the title. I have the tag off the original rear...
  3. BarnStang

    Which Rockers Should I Get?

    When I modified my 93 so long ago, Summit was out of stock on the Crane roller rockers and recommened Dove Performance (they no longer carry them for some reason) but I found a shop that does just as a refernce-I have never delt with this shop...
  4. BarnStang

    What puller for tie rod ends?

    I think you answered your own question. If the product descriptions say all the pullers are for ball joints, then none will work for well for tie rods. I've always used the shock method, don't own a pickle fork. They do too much damage and get stuck. You need a LARGE hammer/maul. Works 95% of...
  5. BarnStang

    What puller for tie rod ends?

    Did any of those pictures you accumlated have product descriptions with them? I dont use any except the pitman arm puller. It took me awhile to find this article-haven't seen it in a long time, but this works well: http://www.mustangsplus.com/tech/shockandfall/shockfall2.htm
  6. BarnStang

    65 wiring question

    The post on the starter solinoid closest to the battery is simply a landing point for 12v battery source. The blk/yel in the alt harness should go to the output of the alt, and to the ign switch. Pull the harness off the alt to make sure it is not attached to the wrong posts, pull the...
  7. BarnStang

    Install advice for 66 coupe trunk seal.

    It does go on a certain way. Its really hard to tell from the small picture in the bag the seal came in, But the wide part goes on the trunk lid. It will fit poorly if put on wrong. Wait and see if some other members post up some pictures-that will help. Also, you can get black weatherstrip...
  8. BarnStang

    1969 fender fitment

    Oh, there is a bracket for that...will have to look again... Is this it? http://www.cjponyparts.com/FENDER-REINFORCEMENT-BRACKET-1967-1970/p/FRBL/
  9. BarnStang

    1969 fender fitment

    Yes, there is a special clip that snaps up into the square hole. I will try and find a picture of it. It goes up into the hole then you slide it to snap it in place. It has a nut attached to it that you bottom fender bolt will go into. You will need some shimms to properly place the fender. I...
  10. BarnStang

    Need '68 coupe courtesy lamp fuse location please help

    Sorry, got off on a tangent. Dimmer controls the dash lights,not the dome lights or courtasy lights. But when you turn the rheostat to the click position with the doors closed, it will close 2 contacts in the headlight switch to send power to the courtasy lights bypassing the door jamb...
  11. BarnStang

    1965 2+2 Door Glass Removal

    Yes, door glass first. THe vent frame will slide to the rear an inch or so once the door glass is out of the way, and is lifted vertically. You will see that there are other holes in the door frame that appear to be useless, but they will allow you to remove and reinstall the adjuster bolts. To...
  12. BarnStang

    Need '68 coupe courtesy lamp fuse location please help

    Check this diagram http://s267.photobucket.com/albums/ii313/Barnstang/Wiring/1968/?action=view&current=E9.jpg#!oZZ2QQcurrentZZhttp%3A%2F%2Fs267.photobucket.com%2Falbums%2Fii313%2FBarnstang%2FWiring%2F1968%2F%3Faction%3Dview%26current%3DE8.jpg Your dome light power is sourced from the...
  13. BarnStang

    looking for advice on a carb

    When I was still in the game, we had installed over 10 Q carbs. What a difference in tuning. Ran like a Holly, tuned up like an Edlebrock...they ALL worked great out of the box and we were buying them from Advance Autoparts cheaper than anywhere else I priced them! Great carb. Its what will be...
  14. BarnStang

    8 inch traction lock rear

    Yep. Great vendor. My buddy and I both bought a center section from TJ. Period correct case for my restoration and detailed well. Glad you found him.
  15. BarnStang

    MSD Atomic EFI

    I just got the joke last night but got distracted before I could reply. Never heard that one before now. Pretty funny - MSD I am helping a friend with his 67 and he is undecided between carb and EFI. I am (was) a big EFI nut when I still had the 93. Have done a couple stock conversions. One to...
  16. BarnStang

    Is this mustang interior still offered anywhere?

    Found this one: http://www.mustangdepot.com/OnLineCatalog/SoftTrim/upholstery-cust.htm and http://www.cal-mustang.com/CARBON-FIBER-LOOK-STANDARD-UPHOLSTERY-C2675.aspx Never used these vendors, but you could call and see if they can still get it. Do some Google searches for carbon fiber mustang...
  17. BarnStang

    MSD Atomic EFI

    I would be interested in more detail about your post. I have been researching an EFI solution for a friends long term project. I watched the entire install video, some of the parts look well, cheesy, I guess. And I am not yet convinced a returnless system is a viable option, but I also know the...
  18. BarnStang

    MSD Atomic EFI

    Has anyone heard of this or any chance installed it? Saw it in my new Jegs flyer. Any thoughts or comments? http://www.atomicefi.com/
  19. BarnStang

    1969 Mustang Mach 1 Project Car

    Do you still have this car? If so, is the tinted glass intact/included? Drivetrain?
  20. BarnStang

    70' 351C Starts But Will Not Stay Running?

    Can't think of anything else. I will be interested to see what ends up being the problem.
Top Bottom
Back
Forums
Menu