Search results

  1. Kumm3

    Plasti Dip Wheels

    I can't say for sure. I did the anthracite in my garage with a plug in heater hooked up within 3 feet of the wheels.
  2. Kumm3

    Plasti Dip Wheels

    You should warm the cans first. Try sticking them into a pot of boiling water for about 5mins before you start spraying.
  3. Kumm3

    My Door Handle And Key Cylinder Install

    Hoping you used the gaskets. I didn't and it did a number on the paint.
  4. Kumm3

    Fox Florida 5.0, Mc Machine, & Other Custom Gauge Owners....

    I'll swap them if there is no other way. I just would get a much better view of the tach if it was on the right.
  5. Kumm3

    Fox Florida 5.0, Mc Machine, & Other Custom Gauge Owners....

    Already have the mechanical, don't feel like spending $240 on a electric model.
  6. Kumm3

    Plasti Dip Wheels

    Put it this way. You would be sleeping on the couch for a while. Hell, i did mine in my garage and the fumes STILL got into the house.
  7. Kumm3

    Plasti Dip Wheels

    Make sure you use a respirator and vent wherever you are doing this. The fumes are no joke when it comes to PD.
  8. Kumm3

    Fox Florida 5.0, Mc Machine, & Other Custom Gauge Owners....

    Im planning on at least unbolting the retaining clip on the fire wall. Just wasn't sure it if was even possible. Maybe if I relocate the way the cable enters the cabin altogether.
  9. Kumm3

    Fox Florida 5.0, Mc Machine, & Other Custom Gauge Owners....

    Has anyone switched the speedo to the left side of the cluster and if so, is there enough slack in the cable to get it over there? Here is the look i am going for. Keep in mind this is just a mock up, i won't be using cardboard on the finished product
  10. Kumm3

    Fox Front License Plate On Fox

    That makes them look buck toothed.
  11. Kumm3

    Plasti Dip Wheels

    Here are a few pics of the wheels with glossifier. And the anthracite with glossifier
  12. Kumm3

    Plasti Dip Wheels

    No base coat. It was between 5-6 coats, then 2 coats of glossifier. You don't need the base since the coverage is great, but if you want to save a few bucks and only do the last 3 coats of vintage gold then it would still work. However, with the cobras, I was able to get the 5-6 coats on all 4...
  13. Kumm3

    Plasti Dip Wheels

    I dipped my 03 Cobras (Vintage Gold) and am in the process of dipping my 93Rs (Anthracite) Pretty user friendly, but watch the dipyourcar videos on YouTube, they will help you out as far as technique.
  14. Kumm3

    Post pics of how your foxbody currently sits

    Here is how she sits to this day. Doing some gauge upgrades, prepping for paint.
  15. Kumm3

    Progress Thread 25thmustang's Progress Pics

    I put Peel and Seal on the doors of mine. Definite improvement over the hollow tin sound of before.
  16. Kumm3

    Fox On3 Turbo 88 Mustang

    Any other info on that dash plate? Maybe a seller name?
  17. Kumm3

    Would You Guys Trade Your Fox For A Sn95?

    Ive thought about it. But i would have to swap the suspension/engine/drivetrain from my Fox into the new SN95. That would be the only way i would consider it.
  18. Kumm3

    Build Thread Want To Blow 5 Years And $50k On A Foxbody? Step By Step Instructions Inside!

    They make helper springs which are real thin spring material to keep the springs in contact with the perch. They dont ad much if anything to the spring rate itself, just enough to keep the springs from banging around when you jack the car up.
  19. Kumm3

    Progress Thread Project "worse Than Expected" 1992 Mustang Lx

    What kind of headlights are you in the market for? Im willing to trade some stockers for those one piece lights. Also have stock 89 CC switches i could throw in. They are just sitting in my tool box.
  20. Kumm3

    Looking For Tails For The 95 W Baffles

    https://store.outperformance.com/ProductDetails.asp?ProductCode=BASSANI%2DBFL%2D5046&CartID=1
Top Bottom
Back
Forums
Menu