Search results

  1. GoldnGT

    STRUT TOWER BRACE ADVICE

    Apparently.. LOL I have the Steeda 3pt one... i love it.. when i would go around steep curves i could tell a difference in the handling.. not much.. but its there.. its worth the investment in my oppinion. Mike
  2. GoldnGT

    My new painted interior with Carbon Fiber!!!

    Not a fan of the red.. but the CF looks great! Mike
  3. GoldnGT

    can you turn the 04 gt traction lock off?

    What planet are you driving your stang on. Its almost put me in 4.. count them.. FOUR accidents b/c it came on when pulling out from a light or from a stopsign.. or turning around on the highway.... that thing has caused me to almost be tboned.. rearended.. etc... Also.. TC.. if you are...
  4. GoldnGT

    Keep the Flows or get the Packs?

    I personally like my flowpaths.. ::shrug:: sound better than Flowmasters in my opinion. Mike
  5. GoldnGT

    Are new shocks and struts worth it???

    I would definately go with some shocks/struts.
  6. GoldnGT

    chip problem?

    Well.. easy solution. pull the chip and see if it still does it. If it doesn't.. there ya go. if it does.. leave the chip out and go get it taken care of under waranty. Mike
  7. GoldnGT

    Nitrous

    Thats where going to the dyno comes in. I would personally adjust to stock.. and then go to the dyno and adjust it from there... take no chances! Mike
  8. GoldnGT

    Nitrous

    I have a Nitrous Works kit. do NOT spray in 1st gear.. there is no use for it and your tranny won't like it. launch, when you hit 2nd, go WOT, and turn the nitrous on. I have a 100 shot that i just bolted on... and you can see the gains i recieved in my sig. you don't need a fuel pump...
  9. GoldnGT

    '03 Cobra Front Bumper?

    Thats how mine looks anyway b/c the da*n body shop that did my front end after my wreck screwed it up. Mike
  10. GoldnGT

    HELP: C&L Trueflow Inlet Pipe Install

    What year is your car. I have a STB and the Trueflow on my 2k outside.. if you need me to take pics i will go do so. Mike
  11. GoldnGT

    Big Horror Story

    If its sticking out at all.. which sounds like it isn't.. if you know how to weild.. you could weild a nut onto it and turn it out. I had no problems with mine. I used the steeda bolt enough to get it to go on a "Little" and then used the crank bolt to pull it all the way on. mike
  12. GoldnGT

    Got some Cobra heads, should I put them on my GT?

    Ok.. in one post you said "What do you mean they wont bolt up, I know they will bolt up fine" and two posts later you say "so nobody knows ANY specifics on wheather they will bolt up? I wanna know if it will work." Make your mind up on whether you know you can do it or not.. Take the...
  13. GoldnGT

    Keep the Flows or get the Packs?

    I personally have never seen any dyno gain w/ a flowmaster catback. I have, however seen gains from ONLY adding a Magnaflow catback... Thats where i'd make my decision. Mike
  14. GoldnGT

    Want to know if 02 Mustang has a Clear Coat?

    My mom's ES330 Lexus doesn't have a clear coat... and looks great. Mike
  15. GoldnGT

    Hood Gas Shocks Group Purchase

    About how much higher did the hood raise.. it looks like a good bit from the video on the website. Mike
  16. GoldnGT

    washing under the hood...

    left white stuff on the car b/c you let it dry to the plastic.. if you keep a constant stream of water (not the spray nozzle,just a regular garden hose) on it it will clean it.. just don't let it dry.. simple green cleaned the hell out o fmine Mike
  17. GoldnGT

    Supercharging the Daily Driver...or Nitrous?

    Nitrous would be your better investment. Mine is a daily driver and i use nitrous on the weekends at the track. i put a wet 100 shot on it.... Mike
  18. GoldnGT

    parking brake problem

    Mine did it without any kind of "ford service" it just happened to be like tha tone day... what recall did you take yours in for?
  19. GoldnGT

    Hood Gas Shocks Group Purchase

    i'm in.
  20. GoldnGT

    parking brake problem

    I have the same problem... Looked for screws.. nothing to adjust... it moves up about an inch and a half before stiffening.. and moves side to side a LOT... ... Subscribing. Mike
Top Bottom
Back
Forums
Menu