Search results

  1. modulistic

    Talk Me Out Of Putting A Wet Kit On My V3-si Blown Stock Block

    so my issue up here is getting a tune. Not too easy to come by in Alaska. So I got to thinking - how can I get more fuel in without going through the injectors? Then my mind wandered back to my LS1 F-body days when I ran a 150 wet shot, which was extremely easy to install. it just screwed on...
  2. modulistic

    Electrical 6 Week Long Charging Problem

    I have no idea, sorry. But that's one hell of an interesting story.
  3. modulistic

    Installing The Manual Trans

    Did you get the alignment tool? Its almost necessary sometimes. Also, it helps to have someone move the tailshaft with the trans in gear to help line up the splines. Double check the angle you are trying to install the trans, too.
  4. modulistic

    Quick Story Of A Crippled Pony, New Donor Car And Some Swap Questions. Also, Introduction.

    when i did it, the interior was already gutted. im not sure how far you have to rip the interior out to change the pedals. provided the exhaust on both cars arent rust welded together, and you have every part and tool you need... i could knock it out in 8hrs. any little thing could stop the...
  5. modulistic

    Slower Et's W Exhaust Cutouts?

    i cant understand how cutouts can make it slower, but the evidence is there. on a tuned exhaust like a snowmachine or chainsaw, i can totally see how the pulses will reflect back, the bounce off the exhaust port and if the timing is right at the right rpm, it vacuums out the cylinder. i dont...
  6. modulistic

    Quick Story Of A Crippled Pony, New Donor Car And Some Swap Questions. Also, Introduction.

    also, dont adjust the cable too tight, to where it is always part engaged. that will wear out the throwout bearing and engine thrust bearing.
  7. modulistic

    Quick Story Of A Crippled Pony, New Donor Car And Some Swap Questions. Also, Introduction.

    if everything on the donor car is in good shape, it will swap over. i ran into one problem when I did one... the clutch cable came out about an inch short. i got a quadrant with the three hooks and it worked well with the existing adjustable cable. you should probably replace the quad and...
  8. modulistic

    Need Serious Help Finding The Correct Rear Rotor On My 5 Lug Swap

    I would love to see a picture of that. How the hell you get the holes drilled perfectly is beyond me without a machine shop.
  9. modulistic

    Fox 2003 Mustang Wheel Nos

    Man, you guys in america can get damn near anything on craigslist. We only got hookers and useless crap on our craigslist.
  10. modulistic

    V3 Chatter

    Its doomed. Fram touches your engine and it kabooms inside of 1000 miles. True story.
  11. modulistic

    V3 Chatter

    Yeah, pretty cool guy, I got mine from him. He held my hand while I was crying about how long it was taking to get to me, and he patiently answers every dumb question I ask him.
  12. modulistic

    V3 Chatter

    I know right. I tried.
  13. modulistic

    V3 Chatter

    I know right. I tried.
  14. modulistic

    V3 Chatter

    Hahaaa. I'm sure the motor is self destructing as we speak due to the frammage.
  15. modulistic

    V3 Chatter

    Cue 84ttop in 5,4,3,2....
  16. modulistic

    Electrical Questions On Putting '90 5.0 Into '88 5.0 Car

    Yeah that's what I'm saying. There is alreaady enough to deal with doing just a motor swap. If it was me, I would get the car running the existing way with the new engine, then tackle a maf or harness swap after you got it right.
  17. modulistic

    V3 Chatter

    Bigger pic, camera phone sucks one.
  18. modulistic

    V3 Chatter

    Gotcha. Its funny how similar sn95 cars can be to foxes, and then sometimes completely different. I had hell getting the perfect belt for my accs, I don't have ac, so the belt is like an eighth inch apart right at the top of the water pump. Seems to be working, but will probably start...
  19. modulistic

    V3 Chatter

    My kit put the alternator down low. Did you guys with the up high alts have to extend the wiring? What is the diff between the kits?