Search results

  1. F

    mass air sensor???

    If its a stock meter the car needs a chip burned to compensate for a larger injector or an aftermarket meter that is calibrated to the injector. They are calibrated either by a flow tube or an electronic fix. I have never heard of just buying the sensor as they are matched up to the housing in...
  2. F

    BBK H-Pipe fitment problems

    It was a bad deal but the reason I was dealing with a new car was a Honda landed on top of my 93' lx 5.0 at a car show and to be fair I don't think that anyone did anything right in my eyes for some time after that. Drunk driver with no insurance and that is a whole different story. I still look...
  3. F

    BBK H-Pipe fitment problems

    I had, at that time found a similar thread to this one that lead me to believe I would be wasting my time. I had just bought the car and planned on ditching the off road H-pipe that was in alot worse shape than I had anticipated. It was irreparable and having ripped it off the car prior to...
  4. F

    BBK H-Pipe fitment problems

    But still nothing about QA inspection of part prior to shipping. You have a fixture to weld said part, what about to check fitment after fabrication? My H-pipe was a one peice setup and had zero adjustability, not to mention both socket fittings were parallel to each other the whole length of...
  5. F

    BBK H-Pipe fitment problems

    I totally disagree with the BBK fits BBK , Mac fits Mac statement. I had BBK Headers and bought a BBK catted h-pipe and clearly the h-pipe was a hack job. If those fixtures are correct maybe you need new welders. I opted to go with the replace it all method and cleared all the BBK parts the...
  6. F

    top end kits for stock motor

    I have no complaints about my TFS top end kit. I am not sure what kind of power I make but before the blower it was a strong setup for sure. AFM has a top end kit as well using trick flow heads and their own camshaft with a PP typhoon intake if you want to check that one out as well.
  7. F

    New wheels and tires...finally!

    Really made the car, and with tint that car would look downright evil mean. :nice:
  8. F

    production #s

    you can call SVT and they will give you that info.
  9. F

    Who thinks this is damned ugly? (Not mine!)

    At least it can be fixed with a fresh coat of paint and not a whole body make over. Some peoples kids anyway???:nonono: :nonono: :nonono: :nonono:
  10. F

    Supercharger question

    that is the starting point for the timing retard. The base kits with 5psi dont even pull timing. I set mine up to 5 and at 5psi it will then start to pull however many degree's of timing per psi the big adjustment knob is set at. It is just a starting point. That is how I understood it when I...
  11. F

    What Trick Flow Top End Engine Kit

    I did the 360hp kit. The intake runners are about an inch shorter on the track heat intake compared to the street. I have gears and a blower so the little bit of torque I gave up on the bottom end was fine with me. Other than the intake everything else is the same in both kits. Do they include...
  12. F

    top end kit for 5.0

    Aderson Ford Motorsports has a kit for $2300. It has TFS heads, typhoon intake chrome valve covers and all the typical stuff as well. Another option to think about.
  13. F

    Anyone in the everett/ marysville, wa area?

    There are a few places but like it has been said not much until spring and summer. there is clearview, the friday night deal in Lynnwood. There was place out by the Everett mall but that was a once a month thing. I am stuck in the house for a few weeks due to a surgery on my hand,but I am...
  14. F

    New to stangnet!!!!!!!!!!

    Yah, about 15 miles north of Seattle. Maybe I will see you around. You will definatley like those gears .
  15. F

    Kidd Valley this Saturday!!!

    Bummer I can't drive for two weeks after my hand surgery today. I will have to figure something out.
  16. F

    Need some ideas to get measurements inside the upper plenums of intakes and caliper ?

    Sounds like what you want is telescoping guages. Thay are spring loaded and can fit in alot of areas. Once you get them locked down, pull them out of the port and measure from tip to tip with a caliper or a micrometer.
  17. F

    Stumbles at 3000rpm

    I have checked the timing and checked it again, all is good. I pulled all plugs and everything seems to check out there as well. they appear to be firing. The only discrepancy is the TPS voltage going dead as it hits 3 volts. I plan to do a good tune up along with the TPS however I will do just...
  18. F

    Spiders on drugs

    Some people have to much time on their hands. That was funny though. Marijauna spider builds a hammock? that was goood.
  19. F

    Stumbles at 3000rpm

    I will probalbly revive this thread with a response later as I am going in for surgery on my hand and wont get around to fixing it for a little while.
  20. F

    Stumbles at 3000rpm

    Yes, the motor was off and just a nice gradual sweep of the throttle blade while I watched the voltage rise. It hits 3 volts and then nothing and appears to be intermittent above that. This is the last thing I really looked at so it has to be the problem. I was always leading towards an...
Top Bottom
Back
Forums
Menu