Search results

  1. a885.0

    video of dyno pull

    sooo 380rwhp out of a 9.5:1 N/A 306?????
  2. a885.0

    Idle/Rev Clips Post 'em Up!

    little idle clip 410W Idle Clip- Video
  3. a885.0

    What do i need to beat a 2008 Zo6?

    All hail the almighty lsx:hail2::hail2::hail2: ha
  4. a885.0

    What do i need to beat a 2008 Zo6?

    If the car is build right it won't take much power in a light fox, for example my brother's car 347ci makes 380rwhp and runs 11.0'[email protected] he hits it with a baby shot 490rwhp runs 10.20's@134. weights 2980lbs with him in it. It's all about how the car is set-up, not dyno numbers.
  5. a885.0

    March 2009 FOTM nominations!

    I nominate n1vfh81
  6. a885.0

    88 gt with SD, need cam advice

    I ran a crower 15511 back when I was speed density, the car ran really good. With stock heads, 15511 cam, edelbrock performer intake,65mm throttle body, and the usual bolt ons it made 244rwhp and 291rwtq with no tune.
  7. a885.0

    Who has one of them drag strip calculators?

    Wallace Racing - Automotive Calculators bunch of calculators here..
  8. a885.0

    5.0 Kenne Bell Potential

    Sounds pretty serious, but this isnt your everyday bolt-on kenne bell s/c kit which the OP was asking about, but I guess it does show what you could do with a 2.1L bell with some fab work...got any pics? 137mph deff. shows 9sec. potential..
  9. a885.0

    5.0 Kenne Bell Potential

    Sounds like a sick set up and runs very well, but 18psi with no intercooler? does he run a meth. set-up? What do you think this car would run with a more efficient blower? one with an intercooler and much cooler inlet temps. It would make more power with less effort..and run faster.
  10. a885.0

    5.0 Kenne Bell Potential

    This is incorrect the 2.4L does not max out at 550rwhp, the cobra guys are making between 550-615rwhp with the standard 2.2L/2.1L blower and stock engines, and the 2.4,2.6, and the 2.8 can make some big steam...Correct me if Iam wrong but the fox body KB's are not intercooled so that makes for...
  11. a885.0

    who's got a solid roller setup?

    Ya its going to be loud haha.
  12. a885.0

    who's got a solid roller setup?

    The sound isn't that great, its pretty damn loud in person..
  13. a885.0

    who's got a solid roller setup?

    Stock 74' block, made 432rwhp but have some tuning and ignition issues to fix, 10.3:1 comp. afr225's,249 [email protected] .672 .672 cam, Edelbrock EFI super vic intake, 90mm throttle body,17/8'' kooks headers,3'' x-pipe, 3'' magnaflows here is a short idle vid. 410W+Idle+Clip
  14. a885.0

    who's got a solid roller setup?

    It actually drive really good on the street, no complaints at all..
  15. a885.0

    Black Intake Pictures

    My EFI super vic. painted black DSC00550.JPG DSC00552.JPG
  16. a885.0

    who's got a solid roller setup?

    I run a .672 lift solid roller on the street in my 410ci. motor, put about 1000 miles on it at the end of last season and the lash has stayed fine, no need for adjustment yet.
  17. a885.0

    can i fit 325/50/15 bfg drag radials on 15x10 welds on fox?

    That coupe posted above I believe belongs to Brent Davis from turbomustangs, I pretty sure it has a homemade mini tub and the tires are M/T 325/50's. To do it right you have to mini tub it to run 325's.
  18. a885.0

    New Car Pictures - 418w Fox

    car looks good..but that motor is breathing through a straw with that little air cleaner on there.
  19. a885.0

    Finally went 8s on the Busa!!

    nice man shes gonna look mean..
  20. a885.0

    BFG 275/60/15 on a 90gt fitment issues...

    they will fit fine, it looks like its only rubbing on the plastic for the rear bumper just need to trim that up alittle, have you rolled your fender lips?
Top Bottom
Back
Forums
Menu