Search results

  1. G

    Needed parts for quarter horse.

    @Dontknowchit As I'm waking up here, I see that I haven't explained The Moates QuarterHorse device other capabilities. I don't know if I'm describing it properly. It is an emulation device that can datalog. I did a google search and just started scanning results. Google search for QuarterHorse...
  2. G

    Needed parts for quarter horse.

    The QuarterHorse does have its own chip built on that the pcm is accessing instead of the pcms's built in chip, so yes it does save or holds the current "tune" or bin file. Some people have just left the QH in place and use the vehicle with it installed on the J3 port but it is not practical for...
  3. G

    Needed parts for quarter horse.

    @Dontknowchit Say for instance, If you bought Just a Moates QuarterHorse and leave in place during your Real Time tuning and testing, then all you have to do is email your finalized bin file, saved from the QuarterHorse to me or anyone with a J3 chip programmer and the tune is put on the J3...
  4. G

    Needed parts for quarter horse.

    @Dontknowchit For well over two years, I have been searching the internet about this topic. Since then, I've downloaded the TunerPro and TunerPro RT software/s. The QuarterHorse works well with TunerPro RT. As with anything tuning, there is a steep learning curve. I'm just now to the point of...
  5. G

    Fox Looking for old Hypertech part

    Ok. I will do that. My "tuning" only laptop is maybe a year old, so it is all good.
  6. G

    Fox Looking for old Hypertech part

    It will take me quite a while to get to where I can tune. I'm just now getting familiar with the equipment and software involved. I have been able to couple the laptop to the pcm with the QuarterHorse device. This is live feedback from the '99 Crown Vic pcm that is controlling the '99 Explorer...
  7. G

    Fox Looking for old Hypertech part

    @Noobz347 I wasn't aware of that. I'm not well versed in "computer". So even though Microsoft is discontinuing support for Window 10 this fall, they don't want to suggest to us common people that possibility exist? I've been exploring downloading OS like "tiny 11" etc. I really need a good...
  8. G

    Fox Looking for old Hypertech part

    I need another hobby like I need another orifice in my body, lol. That really is something that I would considering doing this winter. First, I have to see if my 10-year-old laptop here and the 8.1 desktop PC at work will upgrade to Win 11. Then I will consider it.
  9. G

    Fox Looking for old Hypertech part

    I came across a 3D printer file for the T.I. Performance alloy case J3 chip cover. It won't work on the early EEC-V galvanized tin cases or the Fox body ones. https://www.thingiverse.com/thing:6633224 scroll down the page a bit to see the download button and pictures.
  10. G

    Fox Looking for old Hypertech part

  11. G

    Fox Looking for old Hypertech part

    @Noobz347 Yes, your correct, I was only asking about the cover but that leads me to want to offer information about. The new J3 type chip (I'm not exactly sure it is called at this point) that plugs onto the J3 port, work on Ford EEC-IV and EEC-V pcms. little covers are available for two classes...
  12. G

    Moates Quaterhorse Tuning

    "valves making contact with the pistons until failure" that is a mechanical issue mostly cause by incompatible parts. A small block Ford shouldn't have valves touching the pistons.
  13. G

    Fox Looking for old Hypertech part

    @Noobz347 3-D printing had been a passing thought too. There is a government contractor near me ***** Metalcraft, (sorry, I can't say their name out loud), that my wife used to work for that I had considered approaching, but I'm hesitant because they are used to contract prices. I may give...
  14. G

    Fox Looking for old Hypertech part

    A Fox body friend loaned me this old antique Hypertech Fox body add on performance chip circuit built in this cover with 1989 on the board. I'm after just the cover or housing. I brought it home to trial fit it on 2 years of EEC-V 1996.5 and 1997 Explorer pcms that have to have a chip...
  15. G

    Nicks fast back conversion

    That looks like the same blue that I just bought at Rural King. Maybe. I encountered 3 different Ford blues this past week. Mine may be a tad darker. RK didn't have Ford Corporate (dark) blue.
  16. G

    Nicks fast back conversion

    Thanks for the info!
  17. G

    Nicks fast back conversion

    what type of bit and tool were you using? I/we have a small stack of original 289 heads with different date codes that we will be accessing this winter. They have been in dry storage for ~40 years. Most are non-thermactor. At some point, I'll make a thread with dates for people looking for a...
  18. G

    Nicks fast back conversion

    It's looking like a build!
  19. G

    Nicks fast back conversion

    Looking good! Have y'all gone into the cowl on this one? One of our '66 coupes currently has no cowl top or bottom. It looks like it would be a good time to blast the backside of the metal dash. I have the two piece cowl kit from Dynocorn for another coupe that is a '65. Is Dynacorn making a '66...
  20. G

    Resolved

    resolved
Top Bottom
Back
Forums
Menu