Search results

  1. lightblade

    Gauge cluster question.

    Yes the interior upgrade package comes with the 6 gauge cluster, and the non iup has the 4. Also iup has the mycolor and 4 noniup does not. There are some threads on how do upgrade to 6 and mycolor if you search.
  2. lightblade

    Installed new fuel rails

    Just a swap i didn't change the injectors, it did take the car a few minutes of idle and little revs to adjust to the bigger fuel rails.
  3. lightblade

    Trick Flow Twisted Wedge Heads Cams and Intake NA Dyno Results

    I think the point is people think they are going to make the max power a certain part made for a certain person at a particular time. Which is just not possible with so many different factors and other mods. Every mod is advertised like that. UDP for example most claim 10rwhp. In real life...
  4. lightblade

    Installed new fuel rails

    Installed the MMR fuel rails and UPR fuel gauge adaptor. Also did a little write-up and posted it in the DIY tech section. Here are some pics and the link to the write-up. Aftermarket Fuel Rail Install - WWW.S197FORUM.COM
  5. lightblade

    Dash Blank Plate Switch

    no workin good so far for me
  6. lightblade

    Dash Blank Plate Switch

    Must have got it just in time. Yeah they came out with a 2.0 software later that fixed the little problems and sped up the boot time.
  7. lightblade

    Trick Flow Twisted Wedge Heads Cams and Intake NA Dyno Results

    TGJ. Based on your base line and mods and my base line and mods. 312rwhp is just a different dyno different weather anomoly. On that particular day here at the dyno we go to you would probly have made around 295-300rwhp. My car dyno'd at 304rwhp and 6 months later no mods or changes made...
  8. lightblade

    Dash Blank Plate Switch

    Yeah theres just a plug and those switch panels just snap in and out swo yes you could physical swap them however the plug from the wiring harness probably wont reach over to there in might. If not you might have to lengthen the wires.
  9. lightblade

    Dash Blank Plate Switch

    F90BT is newer, i have the avic d-2 before and its dicontinued, and broke lol.
  10. lightblade

    need some help

    Cams add power depending on supporting mods. On a otherwise stock engine some stage 2 cams you will probably see around 15-20 hp. Now with supporting mods (headers, intake, p&p heads, stronger springs or oversize valves) you could see gains around 40-60 hp.
  11. lightblade

    Would like some info on stroker kits

    Not absolutely necessary but it would help alot, I would always reccomend a dyno/custom tune when you do major mods like that, cost a little more, but at least u know its safe and not detonating lean/rich plus you will squeeze more power out of your mods. Its also way cheaper than buying a new...
  12. lightblade

    Dash Blank Plate Switch

    Pionner Premier F90BT nav/dvd/cd/sd slot/sat/bluetooth/ipod/handsfree :)
  13. lightblade

    Dash Blank Plate Switch

    Here ya go: Oh and I also installed my raptor shift light where the 12v source is on the dash its blue too.
  14. lightblade

    Would like some info on stroker kits

    The aluminum block can run 1,000hp all day. Its the rotating assembly(cast crank, powdered metal rods, hyperautectic pistons) that is the weak link. The rods and pistons are good to about 450rwhp/ 10lbs of boost. The cast crank is decent as they can run 700+ hp but alot of people prefer to...
  15. lightblade

    Dash Blank Plate Switch

    Yes i got black rocker switches with the little led light and i drilled a hole in the middle of the sections of the panel and installed the switches.
  16. lightblade

    Dash Blank Plate Switch

    I use it for my gauges switches, one for power, one for lights. And i will be installing a 3rd switch for the linelocks when i put them on.
  17. lightblade

    09 reverse lights stay on

    Take it to the ford dealer have them fix it.
  18. lightblade

    Dome Litghts Stay On

    Haha yeah i think we have all done it when we first got our cars and were figuring out the oulies.