Search results

  1. SRT Handz

    Tork Tech Gt Dyno Vid!

    I am not saying the lower T-stat would help improve IATs (cause it wont), but running a stock 195 T-stat with a blower is just bad news and keeps the motor running at 210. Even a Lightning runs a 180 T-stat from the factory.
  2. SRT Handz

    Tork Tech Gt Dyno Vid!

    I would run the T-stat down to a 170. My Kenne Bell kut came with a 160 T-stat. With my 160-stat the car runs around 180-190
  3. SRT Handz

    Steigmeier Safe?

    is it running yet?
  4. SRT Handz

    Steigmeier Safe?

    Number are all in the tuning. I have people with Kenne Bells that are putting out less than me and more than me. Its all in the tuning.
  5. SRT Handz

    Steigmeier Safe?

    Should have bought the Kenne Bell.
  6. SRT Handz

    Steigmeier Safe?

    Yeah, steggy is pretty reliable.
  7. SRT Handz

    Steigmeier Safe?

    I got Da Twin Screw cause I am a BOSS
  8. SRT Handz

    Guess My Numbers!

    385/396
  9. SRT Handz

    How Do You Guys Get The Wife Off Your Ass When You Want To Work On The Car?

    All my GF's complained about it. Saying i spend too much time on the car..... Yet they always enjoy it when i fix their car *Knock on Wood* I guess my new GF I have right now is just hella chilla bout it, because she knows i work in the automotive industry and its part of my life.
  10. SRT Handz

    Progress Thread Flghtmstr1's 700 Rwhp Build

    My toes curled when i read the stuff about realizing that you left the rag in the engine.
  11. SRT Handz

    Progress Thread And so it begins....

    I have seen people go 500HP with 39lb. injectors with a SVT Focus fuel pump and a BAP.... So 500 is easily obtainable with an Aviator Pump, BAP, and 60lb injectors. I am running an aviator pump with a 40amp BAP. Kenne Bell said i had to run a 40amp BAP instead of the 20amp BAP because the...
  12. SRT Handz

    Progress Thread And so it begins....

    Aviator Fuel Pump is rated to 310lph
  13. SRT Handz

    99-04 2v stock dyno numbers ?

    My 2001 PI GT Motor dyno'd 255/299 with CAI. O/R Xpipe with Bassani Catback and some MSD Coils, FRPP Wires and a Diablo Predator Can Tune.
  14. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    I plan on taking the exhaust off and polishing it within the next 2 week :-)
  15. SRT Handz

    '03 Cobra IRS Swap in SN95 Project

    So Here it Goes!! Current Set-Up - Ford 8.8 Solid Rear End - Built By Stu’s Trans in Long Beach, CA. (25,000 Miles on Build) - New Wheel bearings, Pinion Bearings, Seals, and Axle Vent. - Ford Racing 3.73 Gears. - Auburn HD Limited Slip Diff. - Maximum Motorsport Adjustable Lower Control Arms...
  16. SRT Handz

    2001 GT Intake swap - Thermostat Housing Question

    It will be perfectly fine.
  17. SRT Handz

    Clutch talk

    Stock Clutch is what you need. I am running 407/420 on a stock SACHS replacement. Costed me $100 from rock auto.
  18. SRT Handz

    Getting MM subframe connectors, got a couple Questions?

    Thats what i did. I even ground off all the paint from the areas..... thats why it was so cheap.
  19. SRT Handz

    Getting MM subframe connectors, got a couple Questions?

    I paid $40 to have mine welded in. Go to a muffler shop, they will weld them in for the best price.
  20. SRT Handz

    injector question

    I think most people on forums over-buy on injectors. Same with clutches.
Top Bottom
Back
Forums
Menu