Search results

  1. S

    fuel pump size on a 93 cobra

    Does a 93 cobra have a stock 88 fuel pump or a 110? My mustang tech. Ref. Manual shows 88 as stock on a cobra. i thougth it was a 110
  2. S

    I need a lower from T-mos

    Hey t-mos, I need a stock lower ported intake asap. Can you email me at [email protected] so I can send you money. Thank you.
  3. S

    93 cobra vin question

    I’m a little concerned on the 93 cobra I bought. I noticied the vin plate isn’t in the corner of the dash like my other stangs. Is that normal? I called the guy I bought it from(2nd owner supposebly) and he was like, uh. I ran the vin at the credit union and also checked an online cobra vin...
  4. S

    ATTN. 93 COBRA OWNERS, READ THIS!

    cobra question for you. i bought a 93 cobra and noticied that the vin plate isn't in the dash. is that normal, or should i worry? i didn't bother to look before i bought. also noticed the vacuum distributor(where all the hoses connect on the drivers side firewall) is different than a normal 5.0...
  5. S

    welcome me to the SVT Crew

    If all goes well, a 93 Red cobra will be mine this Saturday. Can someone give me full specs on the engine, drivetrain, etc. or an website to go to? The car has 180,000 miles, but it drives, shifts, feels great. Quarter windows are like new. Needs little tlc on the interior, but will swap in some...
  6. S

    best intake manifold for mostly stock 5.0?

    hey t-mos, i have a lower for sale if you want.
  7. S

    Speed Density Upper Intake different than MAF Upper?

    yeah, my bad. it wasn't intended for mac'n89. i must be a crackhead.
  8. S

    Speed Density Upper Intake different than MAF Upper?

    what the hell are you smoking? of course they're the same
  9. S

    I'm crossing over..

    what the hell are you smoking gmstomper? jackass. maybe the guy heard wrong. no need to get excited
  10. S

    dynomax race bullets with x pipe

    how will the race bullets perform with magnaflow x pipe with cats? also have equal length headers
  11. S

    Is an RPM to much for stock

    cool,i'll put it on. i have 3.73. the problem is I put a very ported upper/lower stock, but for some reason the drivers intake side is causing a bad vacuum leak. at first i thought it was the gaskets, but put new ones on. I can notice a big difference, flows free, but that vacuum leak is the...
  12. S

    Is an RPM to much for stock

    will putting an rpm manifold be to much for stock heads and cam. i have equal length headers, mag x pipe and exhaust, 65tb, 1.7 RR.
  13. S

    building 306 shortblock have questions

    I have the crank, pistons and rods, but what else do I need to build a 306 shortblock. need exact details and recommended brands. engine will go to a street driven stang with occasional drag. thanks. oh, I have edelbrock 6037 heads with 202/160 valves ported and polished to the fullest. will be...
  14. S

    how to fix drivers seat

    seat leans a bit to the left. any ideas on how to fix?
  15. S

    need help bleeding brakes

    thanks 90-I had the cap off at first, then I closed it. I'll try again tom. with the cap off. Have you or anyone used the speed bleeder valve things? don't know if I'll have someone to help tom. my wife helped today, maybe thats way it didn't work. lol.
  16. S

    need help bleeding brakes

    can someone help in detail how to bleed front brakes? I've changed the pads and installed stainless steel brake lines. Pedal goes to the floor with no resistance after I tried. thanks
  17. S

    AOD to T5 swap

    well, I had a long speech going until my pc crashed(stupid windows). to make a long story short, $1600 is to much. I can ship you most everything you need for about $300. all you'll need is a trans crossmember, clutch cable. pm or email me at [email protected] and I'll let you know...
  18. S

    4 cyl. conversion ?'s

    you have to swap engine with motor mounts, tranny, clutch cable, throttle linkage, vaccum distributor(next to wiper motor), complete harness including headlight(harness inside will work), map sensor, exhaust, 89 or 90 to 93 mustangs(4cyl./5.0) have double hump crossmember, fuel lines(running...
  19. S

    Can a 92 hatch cover fit my 88?

    yes, it'll fit
  20. S

    5 lug conversion question?

    on my 93 coupe,I paid about$160 for my five lug conversion. using 97 cobra's(not the five star ones) with no hub issues up front. I used basically the brothers kit, but used parts except brake drums. upgraded to stainless brake lines, hawk pads and steel caliper bushings. haven't finished yet...
View older results
Top Bottom
Back
Forums
Menu