Search results

  1. 0

    raptor shift light ?

    I too have this same problem? Where you able to resolve it yet? Thanks,
  2. 0

    raptor shift light people in here!

    Adam Do you still have the issue with the light flashing real quick every once and awhile? I have this problem too? I was just curious if you were able to resolve it? Thanks,
  3. 0

    QA1 Strut Shock owners. What are your settings???

    What do you have your QA1 shocks and struts set to for the track and on the street? I was curious to see what other people run at. Currently mine are strut all the way + is 10.... I am at 9 shock all the way + is 12.... I am at 5 Thanks,
  4. 0

    Anyone have there 01 Cobra go in for these TSB's?

    TSB Date Issue 03-9-5 MAY 03 Suspension - Rear Suspension Clunk/Pop Noise 01-10-8 MAY 01 Driveline - Whining Noise On Coastdown I was just curious if they fixed them? I seem to have these problems. The rear suspension tends to happen from a dead stop? Thanks
  5. 0

    UPDATE~~~ Suspension noise

    I had the same issue and I was using MM plates.
  6. 0

    Which of these 4 tires would you choose?

    These tires would not be used in the rain... tire wear is no concern, and money is no concern. I am just trying to find a really good tire that will perform awesome in the corners, and in the 1/4.
  7. 0

    Which of these 4 tires would you choose?

    Trying to decide on which tire to get for my 01 Cobra? Any opinions? I want something that will be good for corner carving, and excellent traction for the drag strip. 1. BF Goodrich g-Force T/A KD 2. Nitto 555R 3. Goodyear Eagle F1 Supercar 4. Toyo Proxies T1S Thanks,
  8. 0

    01 Cobra owners. Can you take a mesurement for me?

    Thanks I appreciate it mineralG!!
  9. 0

    01 Cobra owners. Can you take a mesurement for me?

    What is the stock height from the ground to the bottom of the fender on a 01 cobra front and rear. I lowered my car and can't find my original measurements? Thanks,
  10. 0

    UPDATE~~~ Suspension noise

    1fastpony, I was able to get my clunking noise to go away completly. One I got rid of the aftermarket caster camber plates all together. I took the stock pieces and redesigned them so that they would work better with the stock rubber dampers. the good thing is I can still adjust the stock...
  11. 0

    Anyone using MM Front Swaybar Endlink Set for lowered 1 ¾ Mustang?

    No I don't. I heard if you use the stock K-member you should not use offset steering rack bushings. (this was told to me by Maximum motorsports) As far as the sway end links, the only difference is they have a set that is a little bit smaller length for lowered mustang. Check the link at the...
  12. 0

    shift light help needed

    It taps into the cylinder wire located on the computer, then a ground wire, and a 12volt switch wire. That is it your done. Here is the link to the directions. http://www.raptorperformance.com/99+_Mustang_Install.htm The only thing is you need coil on plug ignition. Which should be all 99+...
  13. 0

    Welp... Took off my Front Sway Bar!

    I think the bottom line that people want to know.... Is it good or bad to remove the sway bar??? Daily driving... good or bad Track racing... good or bad Drag racing... good or bad
  14. 0

    Anyone using MM Front Swaybar Endlink Set for lowered 1 ¾ Mustang?

    I have mine lowered with the Eibach prokit and QA1 Struts and I didn't need any of those and it runs perfectly? I could see that the swaybar links would be a little beneficial and they are not that expensive? I think Steeda wants to empty your wallet... Maybe for a complete race setup all...
  15. 0

    Anyone using MM Front Swaybar Endlink Set for lowered 1 ¾ Mustang?

    Just curious if anyone has used these Front Swaybar Links for lowered Mustangs and how do you like them? http://maximummotorsports.com/urethane_front.asp Thanks,
  16. 0

    spring isolators

    Maximum motorsports sells the poly urethane ones. If you want stock ones you can get them easy and cheap at a junk yard.
  17. 0

    Removing spring insulators

    I have a 01 Cobra with Eibach springs and took the isolators out. They squeeked so bad with them in. Now there is no noise and the ride seems actually better. No harshness or anything. I have squeeks coming from the back when I added the poly urethane ones. I am planning on taking them out...
  18. 0

    spring isolators

    I took mine off the front... They were squeeking so bad with the isolator. Now that they are off, squeek is gone and the ride seems better than with them on. I would say if you drive your car in the rain and snow I would leave them in.
  19. 0

    shift light help needed

    I like the shift lights from www.raptorperformance.com sleek, small, and less expensive than going the other way and they work great.
  20. 0

    01 Cobra with Eibach Prokit. What Shocks / Struts to get.

    I have a 01 Cobra and I am in the market for some struts and shocks. I have an Eibach Prokit and was curious what do recommend accompanying these springs? I won’t be doing any track racing but would like to take a corner good every once and awhile? If you have any inputs I would appreciate it...
View older results
Top Bottom
Back
Forums
Menu