Search results

  1. O

    Valve damage indeed!!!!!

    ahh no good! we just finished up a Trick flow kit on my friends car, and we didnt tighten down the timing chain bolt, so it backed out. broke the timing chain, and bent two intake valves! although we got lucky, it did not scar up the valve seats at all. ordered the new valves from summit...
  2. O

    Bad news!

    yup used the rollmaster chain w/ the bronze bushing! figured out what happened, when we put the timing gear on, the bronze bushing was not on there right, and we didnt notice! so it must have wobbled, and it broke the chain! somehow it chewed up the thrust plate pretty bad too. So hopefully it...
  3. O

    Bad news!

    doesnt look like it. i looked down in there seemed to be ok? everything was still intact. probably gonna tear her down later tonight. ill let you guys know what we find.
  4. O

    Bad news!

    well last weekend we finished my friends trick flow kit, has been running fine for 3 or 4 days now (maybe 50 miles). so today were driving along, stopped at a light. Then the cars idle began to jump up and down, then stalled, and followed by a quik "snap" (same sound when you snap a bolt off)...
  5. O

    HCI swap done NEED HELP!

    well good news, we got the car back today, and it runs! they looked everything over, and found two problems. the kirban fuel pressure regulator wasn't adjusted right (not enough fuel pressure?), and two plug wires were bad. so replaced the plug wires and he burnt a chip, and next monday its...
  6. O

    HCI swap done NEED HELP!

    well guys, today i searched everything over, timing, re-adjusted roller rockers, and searched for vac leaks, and still no luck. Got to the point where it didnt want to fire at all. then i was stumped! I pulled a spark plug and they were black, so threw some new ones in. And fired instantly. So I...
  7. O

    HCI swap done NEED HELP!

    sorry guys should have explained myself a little better, this is my friends mustang, theres no blower on his setup. it just a 95 gt manual, stock bottom end, trick flow kit, 30lb injectors, professional products 75mm tb, PMAS 80mm MAF cal. for 30lb'ers, and a msd dizzy. the best i could...
  8. O

    HCI swap done NEED HELP!

    alright im gonna go ahead and set the timing at 15, and how do i go about checking the tps voltage?
  9. O

    HCI swap done NEED HELP!

    Finished intstalling trickflow kit, 30lb injectors, 75mm tb, 80mm pro-m, and got it running. set the base timing at 10*. but it needs something and dont know what. i have a tweecer but no idea how to use it. just looking for some help, or maybe someone with a tweecer bin finle with my similar...
  10. O

    almost finished! custom install 94 vert!

    haha well right on. thats good info! I had no idea how many to put, just kept adding more and more till it felt sturdy enough to wear it wouldn't flex. Although it did get a little more heavy than i wanted to be. but what the hell still looks good!
  11. O

    stereo install

    thanks man, its not as big as it looks, just drops right in. when i started this project i wasnt so sure that it was gonna work out, but after about 40 hours she is finally finished!:nice: oh and the amp is hidden underneath the false floor on the right hand side, you can barely see it in one...
  12. O

    almost finished! custom install 94 vert!

    I used the weave, and I might have gone a little overkill on the layers? but I ended up doing 8.
  13. O

    stereo install

    just finished up my custom install tonight, just thought id share. http://forums.stangnet.com/showthread.php?t=629526
  14. O

    almost finished! custom install 94 vert!

    and a few more..
  15. O

    almost finished! custom install 94 vert!

    well as promised here's some more pictures. the quality of the pics isnt the greatest, but you get the idea.
  16. O

    almost finished! custom install 94 vert!

    first off its a alpine type X 10, powered by a alpine mrd-m1005. I only have these three pictures right now. But im gonna take it apart tomarrow so you can see what's underneath. basically the box is 100% glass, and i raised the floor 3". you can't tell in the pictures very well, but i made it...
  17. O

    suspension guru's need some input!

    Well I pretty much got my mind on this fontend setup: PA Racing's K-member, control arms, and coilover kit. strange struts Maximum Motorsports 4 bolt c/c plates, and solid motor mounts TOTAL = about 1200$ I just wanted to know what you guys think about this setup? I don't have the coin to...
  18. O

    do your c/c plates hit your hood??

    looking into buying a PA Racing front k-member, control arms, and coilover kit with c/c plates. Im trying to figure out what makes some of them hit the hood? A guy i know, just had his saleen heat extractor hood painted, then after installed D&D's c/c plates. Then shut his hood, and had two new...
  19. O

    polished Trick Flow intake!

    sorry guys! ive been outta town for work, but i got another pic from the top. once again! thanks for all the replys. the scary part of all this is, that was my first polishing project since i bought my buffer! :nice:
  20. O

    Yesterday..Lower River Road

    But wait im not ready yet!? oh nevermind you must be referring to someone else. haha :nice:
Top Bottom
Back
Forums
Menu