Search results

  1. Wi Stang

    325's mounted on 15" welds for a SN-95

    It looks like it is possible. I remembered that a member here by the name of Pops Fun is running that combination. It sounds like it took a little bit of work to get them to fit. Here is a link to a thread that he talks about it in. He has a picture posted, and they look pretty killer...
  2. Wi Stang

    Will this shorter belt routing work? (pic inside)

    I am looking to bypass my smog and A/C pulleys with a shorter belt. If I route the belt the way that I have it in the picture, will I have enough contact with the crank pulley? It is only going to be driving the alternator, and the power steering pump. I have an electric water pump, so I...
  3. Wi Stang

    If I remove the a/c AND smog pulley..will my serpentine work?

    I should find out how it works pretty soon. I currently have the smog delete and A/C delete pulleys. I want to pull them off, and just run a shorter belt, then cut the brackets off to make it a little cleaner in there. I have an old belt I am going to cut and wrap around the pulleys to...
  4. Wi Stang

    Game Time!! Name that plug

    I am not too sure about the first one, but the second connection really looks like the plug for the windshield washer motor. The reservoir is right there by the horn.
  5. Wi Stang

    Wow... just wow...

    :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: I haven't had a good laugh like that in a while. Thanks.
  6. Wi Stang

    Blower with Trickflow HCI?

    I know the first time I went to the dyno I had the stock ignition setup. I had spark plugs that were 2 heat ranges colder, and they were gapped at .032. At about 5400 rpm's I was having issues with the spark getting blown out. I upgraded to an MSD setup, and it cleared up right away. I got...
  7. Wi Stang

    Turbo video of my car

    Sweet Video, and awesome car. I can hardly wait till I go turbo.:)
  8. Wi Stang

    Blower with Trickflow HCI?

    I have a 255 lph BBK (Walbro) in tank pump right now. On the Jegs website for the BBK pump it states it is good for over 500 HP. I am not too sure what the 190 pump is capable of supporting, but I would either put an additional inline pump on, or swap out to a 255lph pump. I agree with...
  9. Wi Stang

    Better pics of my headlights....

    :nice: :nice: :nice: Those are really nice looking. 100% better than the old ones.
  10. Wi Stang

    What is everyones Car Goals?

    For me this years goals are: Replace the stock K-member and A arms with PA Racing unit, and a Strange Front Coil over setup. (I am in the middle of this right now) Drop the T-56 out, and replace the aluminum bellhousing with the SFI certified unit. Install the MM Rollbar, and the 5...
  11. Wi Stang

    Blower with Trickflow HCI?

    I didn't have any problems getting my Vortech to fit. I did the Trick Flow H/C/I at the same time as the blower, and it all went together pretty easily. The only issue I had was that I needed a 3/8" spacer between the upper and lower intake so that the EGR provision on the adapter elbow would...
  12. Wi Stang

    Any opinions on clutch to handle 500WHP?

    I run the Spec Stage 3+ right now too. I've had it for a little over a year, and I don't have anything bad to say about it. I drive the car pretty much every day in the summer. I am know the clutch is harder to push in than a stock clutch, but I am not too sure how much. I went from an...
  13. Wi Stang

    t56 tranny question...

    OOPS, looks like I was a little late, and you already found the info.
  14. Wi Stang

    t56 tranny question...

    I know that all T-56's are not created equal. I am pretty sure the one that came in the 03 / 04 Cobras was rated to handle 450 ft lbs of torque. I am not too sure about the T-56 tranny that came in the lt1's, and ls1's. I know that the T-56 in the Vipers have a 26 spline input shaft, and...
  15. Wi Stang

    Fuel Pump(s)

    You should be fine with just the 255 Walbro. That is the only pump I am running, and I am a little over 500 rwhp. When I got my Vortech kit, I didn't even take the T-rex out of the box. I had heard people having issues with them, and that they were Loud.
  16. Wi Stang

    3rd harmonic balancer took a dump ??!!

    I replaced my stock one with another from Advanced Auto, and it didn't even last a week. The shaft of the balancer actually cracked on the keyway. I checked the crank for too much end play, looked OK, so I threw down the money for a Romac. It has been fine for the last 2 years. The Romac...
  17. Wi Stang

    time for tko. D&D perf. OR Hanlon motorsports?

    I don't know about Hanlon either, but I did get my T-56 kit through D&D Performance. They were extremely knowledgeable, and helpful before and after buying the kit. I called up a few time with questions after getting the kit, and they were always easy to get a hold of. The first guy that...
  18. Wi Stang

    The difference between good customer service, and poor customer service

    Wow, that guy from BOI sounds like a dick. I have ordered a couple of things from Stang Suspension, and I currently have some 17" 03 cobra wheels on backorder. Josh got in touch with me right away after I put in the order to let me know, and see if I still wanted to keep the order. They...
  19. Wi Stang

    K member installation

    Cool, that link will come in hand for me too. I just got my PA Racing K-member, and coil over kit last night. I figure I'll probably start on that this weekend.
  20. Wi Stang

    4 Letters that make me happy

    MMMMMMMMM DART :drool: Hopefully I will have one of those in a year. Good luck. What size motor are you building?
View older results
Top Bottom
Back
Forums
Menu