Search results

  1. serviator

    Eibach Pro-kit question

    Newly installed springs has to settle for a few days before they are at their designated height, so fortunately it should go lower than 1/8".
  2. serviator

    Eibach Pro-kit question

    I followed the stangnet instructions when I installed my Eibach Pro kit, and only removed the short bolts (in front). Like Kilgore mentioned, * watch out * when you take the springs off; they can jump out and do some serious damage. As far as the brake lines; I only pulled those out from the...
  3. serviator

    mach I interior pic request

    UPR still has plenty of Billet accessories, such as shifter bezel kits etc. Take a look at one of the categories here.
  4. serviator

    radar detectors

    Those of us with radar detectors are of course going to be biased by our own brand. You should do research on the radar detector review sites - try to avoid those selling detectors as well. A lot of people likes the Escort, Bel and Valentine One's. I personally would never buy a Valentine One...
  5. serviator

    Seafoam is teh *****!

    It's close, I actually bought the image and added the exhaust clouds. Even if it had been your friends car, I'd like to think there couldn't have been any implications - even in a sue-happy country as this. The image is vectorized, and as you showed it's impossible to know what image it was...
  6. serviator

    Seafoam is teh *****!

    Oh all right. It's just for the fun of it, so I made a less expensive shirt.
  7. serviator

    Seafoam is teh *****!

    I couldn't help it. I had a little spare time and created a t-shirt design :D. Check it out: http://www.cafepress.com/serviator
  8. serviator

    camaro driver. looking at an '03 GT

    Those are the stock wheels on the Deluxe package. The Premium package has the Bullit wheels.
  9. serviator

    Where to install gears around North Denver, Colorado?

    I can't seem to pull up P&P Performance anywhere, do they have a website? I just registered on coloradostangs.com and awaiting activation of my account.
  10. serviator

    Where to install gears around North Denver, Colorado?

    Anyone else have additional suggestions? Unfortunately the John's 4x4 wanted closer to $500 when I called. Thanks for the suggestion though Goshia.
  11. serviator

    Where to install gears around North Denver, Colorado?

    I need 3.73's installed. It looks like a good price would be around $200 - $250. Can anyone recommend a good place in the North Denver, Colorado area? Thanks!
  12. serviator

    hardwire radar detector help included

    Sure, glad I could help!
  13. serviator

    How do I remove the cowl?

    Great, thanks a lot for the info!
  14. serviator

    How do I remove the cowl?

    Thanks for suggesting Haynes and especially for writing down the steps! I'll probably be pulling the car out in the 90-95 degree sun hoping it'll help prevent the coil from cracking. Two more questions in the hope that I don't have to buy the Haynes manual yet to find out: 1) does the seal...
  15. serviator

    How do I remove the cowl?

    How do I remove the cowl in front of the windshield? I checked in my Ford Technical Service Manual (no, not the one that came with the car) but couldn't find any diagrams with the locations of the fastener clips listed. Does anyone here have a diagram or can tell me how to proceed? Thanks!
  16. serviator

    hardwire radar detector help included

    As long as it is installed on the "dead" side of the fuse it is the same as tapping into a wire. The fuse will protect it if it's installed on the "dead" side - however if it's installed on the "live" side of the fuse, it will not offer any protection. If anyone is installing using this...
  17. serviator

    hardwire radar detector help included

    ... And I wrote it before anyone asked so there would be an answer upon searching :). Good luck with the install :nice:
  18. serviator

    hardwire radar detector help included

    The location has showed to work great for me. I have tested both front and rear and it's detecting the radar with plenty of warning time. It may not be a good position for other radar detectors, but the Bel 980 has no problem. I chose not to use my into an inline tap splice because - as...
  19. serviator

    hardwire radar detector help included

    That's what I am thinking, it does the same thing, so there's no need to go through the trouble to locate a wire, having to unscrew plastic pieces etc. However, if there's anyone who knows what wire to tap into, I'd be happy to add it to the instructions.
  20. serviator

    hardwire radar detector help included

    Yes, I stuck it into the fuse hole and inserted the fuse on top of the wire - I didn't have to use more force than usual to push it in - it was pretty easy. I didn't splice the radar detector wires, even though that was a possibility too. I just wanted to keep it in case I ever want to sell...
Top Bottom
Back
Forums
Menu