Search results

  1. JoeDaddy

    Post pics of how your foxbody currently sits

    Drone photo shoot tonight! Plus some new shirts!!
  2. JoeDaddy

    Post pics of how your foxbody currently sits

    Blue 1 and Blue 2
  3. JoeDaddy

    Wrap That Thing!

    On my way to work monday moring at 4am, I came across a racoon that had decided he had had enough of this world. Of course, he picked the side that had been previously damaged and repaired. I did a quick "bandaid" job on it to make it more presentable until I can find a replacement bumper...
  4. JoeDaddy

    Post pics of how your foxbody currently sits

    racoon :nonono::fuss:
  5. JoeDaddy

    Wrap That Thing!

    Maybe i misunderstand? If your saying they did the hatch / bumper all as one peice when they put it on, they still had to cut it? In that case, i did one peice at a time because i was less likely to screw up a small peice vs a bigger one.
  6. JoeDaddy

    Wrap That Thing!

    Cost?? This car is a 10 foooter at best. I could have used a 5' wide x (im guessing) 6' long piece to do the hatch. Instead i used about 5' x 2 1/2' of vinyl to do the whole hatch. Bumpers would have been much more waste doing them in one peice too. Piecing it together probably saved about 1/2...
  7. JoeDaddy

    Boost, With Or Without Ethanol?

    I buy the non ethanol gas for my small engines. I burned up a chain saw with regular gas "with up to 10% ethanol" The small engine guy told me to get the pure gas for anything that was 2 stroke. Now, I do that, and I use it for anything smaller then a car (Lawnmowers, etc..) :shrug:
  8. JoeDaddy

    Wrap That Thing!

    The majority of these are on the aluminum board, and the contour cut ones were cut out with a jigsaw. They were printed out using our wide format printer, that is capable of printing up to 60"
  9. JoeDaddy

    Wrap That Thing!

    I'm not exactly sure what units it is in. The Z was zeroed where the cutter was just touching the substrate, and that was probably its second of three passes. The board I was using in the picture us 1/4 solid plastic. It's nice for garage signs, as it's light, and it has a really nice edge when...
  10. JoeDaddy

    Wrap That Thing!

    That is our engraver at work. Its a smallish one, and can engrave a substrate up to 12" x 24" x about 2" probably (thickest stuff I've ever cut with it was 1"). If I wanted to do anything larger than 12 x 24, I'd have to do several pieces and put them together. I'll throw some pictures up in...
  11. JoeDaddy

    Expired Crap For Your Walls

    Moar crap!!
  12. JoeDaddy

    Expired Wanted 2.73 For 7.5 Rear 79/93

    Where are you located? I have a 7.5 that i need to be not in my life anymore! What i got :
  13. JoeDaddy

    Wrap That Thing!

    Today's excitement In other news, will probably be putting the stripes back on tomorrow :nice: ran out of time to cut them out tonight.
  14. JoeDaddy

    Wrap That Thing!

    You can tell there is a seam. Not noticeable if just glancing at the car, but they are definitely there. And yes, i was definitely loosing my patience by the end of it!
  15. JoeDaddy

    Wrap That Thing!

    Yep, i agree. The 5.0 will go back on the fender. It's just a matter of when i get to it now.
  16. JoeDaddy

    Post pics of how your foxbody currently sits

  17. JoeDaddy

    Wrap That Thing!

    A week to put on, an hour to take off!
  18. JoeDaddy

    Wrap That Thing!

    :lol::lol:
  19. JoeDaddy

    Wrap That Thing!

    Phew, it's finally done, and I'm beat. Soo excited to go cruising tomorrow! I'm still planning on putting the stripes back on, but im not in a super big hurry to do it.:rlaugh:
  20. JoeDaddy

    Wrap That Thing!

Top Bottom
Back
Forums
Menu