Search results

  1. I

    Anybody Run a 305/45/18 or 295/45/18 on a Fox??

    I think Im going to try a 305/40/18 Nitto
  2. I

    Going 5 Lug, Wheel Opinions?

    Thanks for the pic 93project
  3. I

    Anybody Run a 305/45/18 or 295/45/18 on a Fox??

    Bump
  4. I

    Going 5 Lug, Wheel Opinions?

    Bump Sent from my Droid using Tapatalk
  5. I

    Anybody Run a 305/45/18 or 295/45/18 on a Fox??

    My car has 4.10s and Im running out of gear in the quarter, Im about to rev limiter in 4th at the end, with the 275/40/17s I have now. I did find a couple of 27" diameter tires that might work also.
  6. I

    Anybody Run a 305/45/18 or 295/45/18 on a Fox??

    Im going to be converting my car to 5 lug soon, and I want to run a 28" tire on the rear and was wondering if anybody has run either of those sizes? There going to be going on 18x10 Saleen wheels with fox length axles. The 305/45/18 are Nitto NT05R or NT555R and the 295/45/18 are Nitto NT555 or...
  7. I

    Going 5 Lug, Wheel Opinions?

    Ive looked at more picture tonight and Im leaning toward the hyperblack ones
  8. I

    Going 5 Lug, Wheel Opinions?

    Im going to be converting to 5 lug soon, and Im trying to decide on wheels. I think I want to go with 18x9 and 18x10 Saleens. Im thinking of either going with hyperblack or just black. I made some quick photoshops, nothing special just to get the idea. Whats your opinion? Hyperblack
  9. I

    Post your favorite pic of your car.

  10. I

    Anybody Make Their Own Discharge Pipe?

    I have an A-Trim with a plastic discharge and a bypass valve fitting screwed in and it blew out of the plastic last night because the nipple on my bypass cracked so my bypass valve wasnt functioning. Im thinking about making my own instead of paying over $100 for a aluminum vortech one...
  11. I

    radio bezel/gauge holder, radio on bottom gauges on top?

    I tried it too when I installed mine, the radio hit the trans tunnel
  12. I

    88Gt Conv, lowered and rims rubbing a-arms, help!

    I had the same problem when I put my 17x9 SC wheels on the front of my car, I installed rack limiters and now the wheels stop just before they hit the control arm, I lost some turning radius, but Im used to it now and Ive learned what I can and cannot do.
  13. I

    New Control Arms and a New Stance

    Yeah they are on top of the control arm, Im not sure how to run them, I also installed the guides too and wasnt sure how they were sapose to go either. This seemed to be the best way, I tried them below but then the would rub on the threaded part of the control arm. Im open for input on how to...
  14. I

    New Control Arms and a New Stance

    Thanks Im running turbo coupe rear discs with north race car brackets Im confused my car is dark green?
  15. I

    New Control Arms and a New Stance

    Some New Better Pics
  16. I

    after you built your stang did the insurance company reassess the value?

    I have Guide One Customized Insurance on mine with an agreed value.
  17. I

    New Control Arms and a New Stance

    Thanks, That makes sense, I just put them in the way I took them out, I will change them around, thanks for your help.
  18. I

    New Control Arms and a New Stance

    I was told by the previous owner they are moroso drag springs, they raise the rear, I plan on running a 28 inch tire on my welds when I go to the drag strip, but I dont have them yet, I might cut a 1/2 of a coil off after I get some tires to go off of. I have a stangbox from wild rides race...
  19. I

    New Control Arms and a New Stance

    Thanks for the comments guys They are both pointed towards the passenger side, because that is the way that they came out, is it going to hurt anything being this way or should I change them around? They were cutouts, but I redid my midpipe and didnt put them back in, they might go back...
  20. I

    New Control Arms and a New Stance

    I installed a set of Maximum Motorsports Control Arms with Ajustable Spring Perches. I also installed a 98 Cobra rear sway bar. Im going to raise the rear some, its settled from me driving it, and now its lower than the front Before
Top Bottom
Back
Forums
Menu