Search results

  1. Tim2002GT

    Differential & axles: Strange vs Mosler vs FRPP

    I've got a friend using an Auburn LSD in his Whippled 03 Cobra making 620rwhp. He's taken it to the track numerous times without an issues and drives it all the time on the street. Eaton also makes a good LSD differential.
  2. Tim2002GT

    Over 4k RPM-Voltage drops, battery light goes on

    ^ this! Take the alternator off and have it tested at a local parts store.
  3. Tim2002GT

    nitrous on a teksid 2v?

    Actually, nitrous works very well in higher compression engines. You will want to run some good fuel when you do spray it though. I don't see any reason why your motor wouldn't hold up with a 100 shot. What all is done to the motor? As for picking up 13-14 mph, a 100 shot by itself will...
  4. Tim2002GT

    Differential & axles: Strange vs Mosler vs FRPP

    I have Moser axles and the studs they use are the same size studs as the factory axles. Moser or Strange 31 spline axles will be your best bet. If it was an all out track car, I would go ahead and step up to 33 spline axles, but if you only drag race it a few times a year you should be fine...
  5. Tim2002GT

    Help, Fixed Exhaust leak after 3 codes, failed emissions

    I am guessing your problem is something like this. I have been getting similar codes lately. Only thing I did was swap tranny's. I'm thinking now that maybe I crushed the harness between the motor and tranny and screwed up some wires. If I find anything out, I will let you know...
  6. Tim2002GT

    Yay or Nay on new wheels

    Looks great man! You can't really go wrong with any of the fr500 wheels on these cars.
  7. Tim2002GT

    315s on a 17x9 wheel?

    A 275/40/17 Mickey Thompson ET Street radial will be your best bet for traction with your current wheels. They won't last much more than 5k miles if you do alot of aggressive driving on the street though.
  8. Tim2002GT

    315s on a 17x9 wheel?

    I ran some 315 Nitto drag radials on my 17x9's a couple years ago. They fit fine and the treadwear was even all the way across. I don't think I would try it with any other tire though, as those Nitto dr's tend to run narrower than most 315's. Here's a picture with them on... For...
  9. Tim2002GT

    Who runs Royal Purple Syncromax in their 3650?

    I agree. I more or less use Mobil 1 in everything, with the exception of the tranny. I use Pennzoil Synchromesh in my 3650. Shifts smooth. I've heard that RP Synchromax is hard on the synchros in the 3650's. Take that with a grain of salt, just something I've read on the web.
  10. Tim2002GT

    tax money

    I would go ahead and upgrade the rear end now. Get yourself some 31 spline axles and maybe an Auburn 31 spline differential. Add to that some good rear lower control arms. If you can do the work yourself, you can save yourself enough money to probably buy some good drag radials(MT et street...
  11. Tim2002GT

    drag racers....goals for 2011

    Thats awesome man! The mph is there to run a 9. Keep chipping away and it'll happen sooner or later.
  12. Tim2002GT

    Photos: Gauges to Dash instead of A pillar

    Looks good! Are you going to do a full drivetrain swap from your old car to the new? Usually they do that with their 5" monster tach's. Going off of what I've seen racers do.
  13. Tim2002GT

    MGW Shifter Install Question...

    You don't really need that grommet. I didn't use mine. They must have changed the design of those boots. I got mine about 4 years ago and it has a hole on each side for the stop bolt to go through. Also, if you have a t3650, alot of people do not use the stops. It is said the 3650 has...
  14. Tim2002GT

    MGW Shifter Install Question...

    There should be 2 small holes on each side of that boot where the stops stick out.
  15. Tim2002GT

    Any pics of yellow Stangs?

    This might be interesting to some. Here are all of the different wheels I've had on my car at one time or another. Summit Racing Fast Fives Centerline Tel-Stars(my personal favorite) Anthracite Bullitts(currently on my car) '95 Cobra R's(on it when I bought the car) and...
  16. Tim2002GT

    Power Adder guys...Thinking about joining you

    Thats how I have mine also, except I am using an SCT XCal 2. Both of my tunes are from Mustang Performance Parts & Upgrades by Brenspeed. I was impressed with how well their nitrous tune has worked for me. My car has been on the dyno numerous times and the a/f always looks good without much...
  17. Tim2002GT

    Any pics of yellow Stangs?

    I don't have the holes filled in yet, they are just plugged. So I like to change up the look of the car every now and again by putting the wing on or taking it off. Currently it is off.
  18. Tim2002GT

    Folks with the MGW Shifter - Do you have it rotated at all?

    I will try to get a pic tonight from the drivers seat.
  19. Tim2002GT

    Power Adder guys...Thinking about joining you

    Nah, leave the pulleys on there. Will only help the car, on and off the bottle.
  20. Tim2002GT

    Any pics of yellow Stangs?

    Nice! Those GT4's look real good on there!
Top Bottom
Back
Forums
Menu