Search results

  1. ARBOC

    Project Blue Balls(PBB) gets underway

    It's the factory Ford color code "KF" by Standox.
  2. ARBOC

    Project Blue Balls(PBB) gets underway

    I do want to lower it but I don't know what springs to get. I only want to go about an inch due to the fact I'm installing my long tube headers and x pipe this weekend. What do you guys suggest? REMEMBER, only around an inch or so!!!
  3. ARBOC

    Project Blue Balls(PBB) gets underway

    I actually paint cars for a living. I work at a dealership up here in Canada. I had access to the booth after hours. I did have an insurance claim for the left side of the car, so I figured why the heck not freshen the color up a bit. I eliminated the dust by blowing the floors off before I...
  4. ARBOC

    Project Blue Balls(PBB) gets underway

    Ok this is the end to a wonderful project that I enjoyed very much. Can you pick out the diffrences? I got the car all cleaned up and ready to go. I got to drive it home today after about 4 weeks of working weekends and late at night. Here is a before picture also. Here is the...
  5. ARBOC

    Project Blue Balls(PBB) gets underway

    The gun above the nozzle is called a gravity gun, and the gun that has the pot below the gun is a siphon fed gun. Both are good guns, but I like the gravity fed gun. The porus primer is gonna be your high build primer. 3 possibly 4 coats will do. The time between coats is 5 to 10 minutes...
  6. ARBOC

    Project Blue Balls(PBB) gets underway

    Ok, Ok so I lied. This will not be my last post in this thread. I got 95% of the car done. It looks dusty, and the weather really sucked up here. So I wasn't able to get any good clean pics of the car. I only got 4 pics today, the battery in my camera died. Here it is. Oh yeah, 1 more thing. The...
  7. ARBOC

    Project Blue Balls(PBB) gets underway

    No you wouldn't need all those guns. You need 1 gun. I just spoiled myself and got them over the years.
  8. ARBOC

    New Wheels + New Paint = New Pics!

    Very nice looking ride. Kudos bro
  9. ARBOC

    Project Blue Balls(PBB) gets underway

    Well thank you very much. You don't have to bake your car, it just speeds up the curing process. You can just leave it over night with out a bake cycle. I have 5 guns. 1 Mac tools mini spot gun, 1 Devilbiss Primer gun, 2 Devilbiss Millenium GTI, for base and sealer, and 1 Sata jet NR2000 for...
  10. ARBOC

    Project Blue Balls(PBB) gets underway

    Ok. the car is painted. i have a few dirt chunks to polish out of the hood and my darn gun dripped on the trunk lid. I managed to save the trunk lid by adding another coat of clear. So it will take some minor polishing. The first two pics are after 3 coats of base coat. The rest is of when the...
  11. ARBOC

    Project Blue Balls(PBB) gets underway

    Another update. I finally finished block sanding the whole car. Its smooth. I found a couple of pin holes and a stome chip or two so I will fill them in with a small amount of putty tomorrow. I was going to leave but then I decided i had time to mask it. I will be painting it late tomorrow...
  12. ARBOC

    Project Blue Balls(PBB) gets underway

    Its the stock ford color. KF. The funny thing is I did a spray out card with Standox and It was to dark. I then called the Dupont rep and he gave me a spray out card that he did and it was way to light and there was to many metallica in it. I then called my buddy from Sikkens and he did a card...
  13. ARBOC

    Where exactly do I lube my TOB to get it to stop squeaking?

    Mine squeaks also. I hate it.
  14. ARBOC

    Project Blue Balls(PBB) gets underway

    I think I'm going to get a set of stock bullitts for now. This winter I'm planing on getting either the deep dish bullitts, chrome, or the American racing Torq thrusts II
  15. ARBOC

    Project Blue Balls(PBB) gets underway

    I have 2 DeVilbis GTi Milleniums, 1 for sealer and solids, and the other for metalics, and I use a sata jet nr2000 for clear.
  16. ARBOC

    Project Blue Balls(PBB) gets underway

    Well another update. I got the parts sprayed. I think it looks great. I used a slow reducer with the base coat and it went on like silk. I also used a slower hardner and reducer in the clear coat along with some plastisizer to help with stone chips and such. The clear went on nice, with just the...
  17. ARBOC

    If you ever used Nitto tires, come in here!!!!

    hey Dan, where did you get the rims? Off of Matt? And where do you get Nitto tires in the city?
  18. ARBOC

    Goin in for my Interview to become a firefighter on wed.

    Good luck man. Wish you the best. It sounds like a fun career
  19. ARBOC

    Project Blue Balls(PBB) gets underway

    Just an update on Project Blue Balls Well think I'm half way there. I've been working nights and some weekends on my car. So far this where I'm at. It needed a door. The car was hit on the passenger side and the repair on the door was mediocre. It had holes in it either from a mig welder or a...
  20. ARBOC

    what are your top 5 fav bands?

    I'm a lil on teh game, but heres mine Metallica Kiss Motley Crue Nirvanna White stripes
Top Bottom
Back
Forums
Menu