Search results

  1. 88mouse

    Help Please Whistling Dixie!!

    I run a 70mm mac. Only does it around 2500rpm or so. And you can buy the t body and egr spacer for what most of the other companys sell just the t body for.
  2. 88mouse

    GT40 F3ZE Explorer Heads!!!

    the 1262 are for a raised intake runner. Go with the 1250.
  3. 88mouse

    help can't get traction

    The bfg traction ta is just a regular street tire.
  4. 88mouse

    OEM axle bushings....what brand??

    They use the same bushings in the twin I beam setup on the trucks. At work we order the moog replacements. I knock them out with a air hammer. And use a ball joint press to press them back in.
  5. 88mouse

    Aerostar al driveshaft ?

    best thing to do is measure it. Measure you stock drive shaft then the one on the aerostar.
  6. 88mouse

    87-93 Dash Pad???

    I have two grey dashes that im not using. I will get them out tomarrow and see what kind of shape there in. And all so this is in the wrong section.
  7. 88mouse

    10 grand for the tech Stangers

    You have a problem here. A stock bottem end 302 with H/C/I won't make 400hp.
  8. 88mouse

    Blue Smoke

    How many miles on the motor? Ford does not use a very good valve stem seal from the factory. I would check the compression, if the compression checks out good. I would try a set of valve stem seals.
  9. 88mouse

    B cam

    +1 Don't waste your time puting a B cam in. If your going to run a ford cam go with the E.
  10. 88mouse

    help can't get traction

    Need more info about the car. If its a manual transmission don't dump the clutch at 5000rpm try it about 2000.
  11. 88mouse

    351w roller cam conversion

    The B cam sucks in a 302 (I have ran one) I wouldn't even waste my time puting one in a 351.
  12. 88mouse

    351w roller cam conversion

    Would you be puting a solid cam in a DD or is it just a toy?
  13. 88mouse

    How to tear apart a t5z?

    They are one of the easiest manual transmission to rebuild.
  14. 88mouse

    Street racer owned thread

    :rlaugh:
  15. 88mouse

    manual tranny problem

    +1
  16. 88mouse

    1993 fox body 5.0

    My notch was wrecked when I got it. The lower part of the support was bent but the top was fine. I just cut it off flat with the frame, plated it, and bent a pieace of roll bar tubing and welded it on.
  17. 88mouse

    10 grand for the tech Stangers

    I know what you mean about puting one together so you know what all is done to the car. I'm going to have a progress thread here in a few week on my car.
  18. 88mouse

    1993 fox body 5.0

    Its just spot welded on. Just drill them out and replace them.
  19. 88mouse

    How to tear apart a t5z?

    To get a t5 to hold any kind of power it needs to be shimmed up. Kevins89: where do you live? There is a guy that live about a mile up the road from my house that builts t5's and knows how to shim them up. I have one of his t5z in my car now. Still works as good as the day it was bought. It...
  20. 88mouse

    10 grand for the tech Stangers

    I would take the 10grand and go buy another car that somebody has allready fully built. There are some really good deals out there right now. About three weeks ago this guy came up to me at the store and was talking to me about mustang. Said he has a 93Gt that has been cloned into a...
Top Bottom
Back
Forums
Menu