Search results

  1. O

    Car hesitating... Checked TPS its fine... ???

    I think the problem is solved. Instead of putting in my NGK G-power plugs, I went and bought the full thread Motorcraft plugs. I got a code reader from a friend, code was P0307, misfire on cylinder #7. Changed the plugs, the 7th coil had a bit of water in it, cleaned the water off of it...
  2. O

    Car hesitating... Checked TPS its fine... ???

    I wish we had an autozone in Canada, because no one pulls codes for free. And no plug wires because it is COP. I will look into cleaning the MAF, and will change plugs today, we had a sever thunderstorm warning here for 2 days, so couldn't get much done.
  3. O

    Car hesitating... Checked TPS its fine... ???

    I check the fuel pump by the fuel pressure right? - What should the plugs be gapped to? My car is a 1999 GT. - I also heard something in the lines of, I need "full thread" plugs, if not it is highly likely that I will blow out a spark plug and would need to helicoil or retap the head, is...
  4. O

    Car hesitating... Checked TPS its fine... ???

    Ok thanks :) Its my first domestic v8, and I am learning more and more as it goes :) :SNSign:
  5. O

    Car hesitating... Checked TPS its fine... ???

    To add to this problem... Before it even started doing it when I went WOT, it always misfired sometimes when I bliped the throttle before down shifting etc...
  6. O

    Car hesitating... Checked TPS its fine... ???

    2 days ago, my car was only hesitating while I was in X gear and gave it more then half throttle... Today driving back home from work, it started to get worst and worst, now it is not even running properly at idle, the idle doesn't fluctuate but it sounds like tehre is a missfire, and it...
  7. O

    Pics from the Strip

    Thats not a wing! Thats a picnic table!
  8. O

    Couple of pics of my car

    I will put on the pony if only I can find the stock grill and take the pony off of it.
  9. O

    All wingless mustang come on in.....

    http://forums.stangnet.com/showthread.php?t=634845 No rear shots, but there u go
  10. O

    Couple of pics of my car

    ^^^ These are the ones I shot. ^^ and these are the ones that a friend shot. hope you like em.
  11. O

    Took the day off and took some new pics...

    I LOVE THE COLOR!
  12. O

    Got my new wheels and tires on the car

    Thanks, they are BBS RX 17X9's +28mm offset, tire rack had them for sale at $290 per wheel. After shipping, brockrage and customs fees (since I live in Canada), they cost me around $400 per wheel, I also bought a 5th one for a fullsize matching spare.
  13. O

    Got my new wheels and tires on the car

    I am going to be painting it flat black and putting it back on... Not yet, I will take some more pics later on.
  14. O

    Went to the track, new times!

    I haven't taken mine to a 1/4 mile track yet, but I've heard from a cuople of local mustang gt owners that they launch at 1000-1500rpm.
  15. O

    Got my new wheels and tires on the car

    Finaly things are coming together. The caps say Panoz on them cuz they sent the wrong ones, the BBS caps are coming in the mail. The car is very dirty and these are just some quick snapshots. :SNSign:
  16. O

    Removing drivers and passengers seat

    That article just says take off four bolts, and its straight forward. I wish that was the case with me. After looking under my car, i figured that my subframe connectors bolt onto the seat bolts. So my guess is that when they put in the subframe connectors they use an impact gun to tighten...
  17. O

    2004 Passenger seat removal?

    So if I understand correctly, I have to loosen the bolt from under the car, and just hold the top nut in place with an open ended wrench?
  18. O

    Removing drivers and passengers seat

    I tried searching the forums for an answer but came up with only how-to's for the rear seats :S I need to remove my front passenger and drivers seats so I can put in the Sparco's which I have purchased. The 2 bolts that are located in the front of the seat comes right off, but the two bolts...
  19. O

    BULLIT Intake Manifold

    What is needed to put a Bullit on a 2V 4.6? Is it even worth it?
  20. O

    Would 275/40/17's and 27mm 17X9 wheels work?

    I spoke to Discount Tires today, they told me it wont fit :shrug: I asked them the back spacing they said it was 6 1/4inches, and I asked if it woudl clear my calipers, and they told me that it wont because of the spoke design. I was looking at the MB Competition Weapon wheels...
Top Bottom
Back
Forums
Menu