Search results

  1. Numbles

    My LS1 Notch Project (DUW)

    I would have but the red sn95 you can see the headlight in on the first page is a 32v swap car. Cant do the same swap and the car you go cruisin with.
  2. Numbles

    My LS1 Notch Project (DUW)

    Lyncher - Perfect example of a thought out opinion. I appreciate your comments. EDIT: Im going to shoot some video tomorrow afternoon. And a buddie of mine is going to make a buildup video. Should have it posted by mid next week.
  3. Numbles

    My LS1 Notch Project (DUW)

    I will be an GLD all summer long. Although clocks will be off because this is a street car that I occasionally race for money so times on spray at least will be kept to my own knowledge. I used 351 swap headers (long tubes) and put ls1 flanges on them. Both bolted right up to the motor and...
  4. Numbles

    My LS1 Notch Project (DUW)

    The thing is guys, alls I have owed is fords and I will continue to do so. This is my 4th mustang. all were modified. If I wanted an f-body Car I would have bought one. I will own a vette one of these day though. But college is holding me back on a car like that. 85_SS_302_Coupe - Yes I...
  5. Numbles

    My LS1 Notch Project (DUW)

    This is just because ford motors dont even compare to chevy motors $ for $ or stock for stock. No chevy guy in their right mind would put a 302 in their ls1 car because it would make them slower. The whole point of this swap is getting a 6-speed, stock like drivability that would otherwise...
  6. Numbles

    My LS1 Notch Project (DUW)

    Because of the wiring harness on the ls1. If I were to do that the wires for the MAF and air temp sensor wont reach. I could cut them and extend them because they are signal wires and not 0-5v type sensors. But thats a project for another day. No more wiring from me this month. Im driving the...
  7. Numbles

    My LS1 Notch Project (DUW)

    Watch out ive heard those nikko kids are hardcore. Dont you know man, your messing with your life.
  8. Numbles

    My LS1 Notch Project (DUW)

    nope.
  9. Numbles

    My LS1 Notch Project (DUW)

    dont forget they use ford injectors too.
  10. Numbles

    My LS1 Notch Project (DUW)

    Flame away brother. What sets your mustang apart from the pack. A hoodstripe and cobra r's:shrug:
  11. Numbles

    My LS1 Notch Project (DUW)

    Here's the days work. This is the start of a web of wires and connectors to get all the guages hooked up Here's the motor all finished up with the fuel rails and lines. Dont mind the jumper wires. I cleaned them up after I took the pictures. Gauges Installed Nitrous and...
  12. Numbles

    My LS1 Notch Project (DUW)

    Here's the days work. This is the start of a web of wires and connectors to get all the guages hooked up Here's the motor all finished up with the fuel rails and lines. Dont mind the jumper wires. I cleaned them up after I took the pictures. Gauges Installed Nitrous and...
  13. Numbles

    My LS1 Notch Project (DUW)

    That a jegs catalog, and a toilet on my front porch and ill be set.
  14. Numbles

    My LS1 Notch Project (DUW)

    That would be me. Although if you saw me driving the car it would have been on draglights. You arn't by any chance Jeff. The previous owner of the car. I hear you got a blown notch. Couldn't help but notice your avitar.
  15. Numbles

    My LS1 Notch Project (DUW)

    3.27 gears in the back and a 2.66 first gear.
  16. Numbles

    pic request 96-98 gt wheels/hatch

    Go on the corral. There is a wheels section I think and there are at least 3 or 4 with these wheels.
  17. Numbles

    My LS1 Notch Project (DUW)

    Thanks for the comments. Everyone is entitled to their opinion.
  18. Numbles

    My LS1 Notch Project (DUW)

    Motor has 50k on it. And it runs perfect for now so Im not antisipating any internal damage. FWIW the motor that cam out of this car had 0 oil pressure at idle and 5-10 at wot.
  19. Numbles

    My LS1 Notch Project (DUW)

    LOL. Especially when you buy a k-member that should allow you to bolt the motor right up. Then when it doesn't you have to buy drop rack bushings. Figure out how to make custom mount adapters to raise the motor. To clear the rack and then drop a couple hundred on a modified oil pan.:bang: I...
  20. Numbles

    My LS1 Notch Project (DUW)

    Total cost really isn't that much when you think about it. Here's a list of everything. Keep in mind not everything here is needed like the 5-lugswap. I could have also used a stock 4.6 k-member with modified 4.6l mounts which another guy has done. LS1/6sp/Pcm and harness was an ever swap...
Top Bottom
Back
Forums
Menu