Search results

  1. StangYellow

    Detail Guys

    A "cleaner" is an abrasive, and a sealer is your final step. If you have some shade, apply a sealer wax down, and then down the road use a detailer if your isnt that dirty. Good choice on Meg's BTW
  2. StangYellow

    whats the cheapest throttle body/plenum combo?

    Nothing except for bling level. I put it in the same "like tits on a bull" category as chrome radiator covers. If you are looking for THE cheapest t/b plenum combo, your answer is the Professional Products non-polished units
  3. StangYellow

    Going To The Track, Questions

    That's a very smart rule. I never understood how people could skimp on safety like that. Even if its some kid with a 72mph ****box, they should still be protected from the car in the other lane, and the water/oil dropped from a previous car.
  4. StangYellow

    Going To The Track, Questions

    I bring my car to NE dragway once in awhile. They check how well your battery is mounted down, the condition/tread of your tires. Im not sure what times your car is capable of, but a driveshaft loop is required on all 12 second cars. You probably wont break a driveshaft on your car, but its...
  5. StangYellow

    Billet grille. Uh oh.

    I am one of those guys.
  6. StangYellow

    Tech section

    Why is the tech section archived from 2 days ago, and only 2 pages long? 80% of the threads in the talk section are tech related because people know that if they post a topic today, it will be gone by Wednesday.
  7. StangYellow

    whats the cheapest throttle body/plenum combo?

    Brand new the Professional Products t/b and plenum can be had for $200 shipped through I believe 50restoration. If you flip through a mustang mag, everyone has them for $200 shipped.
  8. StangYellow

    msd or accel coil packs

    99+ do not have coil packs. Or do you mean the COP's? I know someone who bought a set of MSD's i believe, car ran the same as it did with the stockers.
  9. StangYellow

    Finally A Member of the 10sec Club

    I can send you some of my extra 13.7 timeslips if you want?? :shrug: Nice work getting into the 10's. :)
  10. StangYellow

    Gangsta lean

    For me it was backing over bumps. You hear that sound in the back and yell out the F word, and see rubber hanging off the tire. Ill see if i can get the fenders rolled then. I know someone who has an auto body shop
  11. StangYellow

    Gangsta lean

    Hmmm. Well looks like i need new springs, or spring spacers. My damn quarter panel keeps cutting my tire :(
  12. StangYellow

    Gangsta lean

    Im having a problem "cutting" my passengers side tire on the tread. Ive noticed for awhile that the car naturally leans to the right hand side, even before i lowered it last year. I cannot figure out what's wrong with the car, but like I said, the factory suspension was leaning to the pass rear...
  13. StangYellow

    What causes a car to backfire underdeceleration

    If it shoots flames, I would leave it alone. :)
  14. StangYellow

    massive bolt on power

    Ive purchased everything dyno tested from MM&FF magazine and I've been telling everyone my engine makes 394hp. Dont I feel like a turd. :bang: dammit!
  15. StangYellow

    Stupid Mistake (X-Pipe)

    To touch on the subject earlier, if you do not have a breaker bar, or the space will not allow you to use a breaker bar, get yourself a decent size rubber mallet. Sometimes all you need to do is break the seal of rust or Loc-tite to get the nut moving. Hanging on it doesnt create the sudden jolt...
  16. StangYellow

    MSD Tach Driver

    I call it "taking care of paperwork" There are ignition wires on the passengers side of the firewall, but I do not know which wires you need to splice into. But thats where the tach driver should be mounted to.
  17. StangYellow

    Guy with Camaro

    Also, when I attend car shows there are always those with stock appearing 5.0's and 4.6's that have "a supercharger on order". I hate those stories too.
  18. StangYellow

    Guy with Camaro

    Once in awhile I help out and work PT at a gym. I cant tell you how many people I know that ask me or other people "whats your max bench?" No matter what I say, they are always going to have a comeback story and say "my friend benches 900". I always tell people that my max bench is 135. Then it...