Search results

  1. M

    Flywheel: Steel vs Aluminum

    thanks for all the responses, i think i'm gonna go with a billet steel one if i can afford it. I'm not gonna be racing the car and i've heard about some problems with revs dropping too quickly and stalling with the aluminum fw's.
  2. M

    Flywheel: Steel vs Aluminum

    nobody? please? i need to decide soon whether or not to move on this deal
  3. M

    T-5 Swap: What else do I need.

    If your 302 is from 1981 or earlier, then you need to use a 28 oz imbalance factor. If your transmission is from an 89 then the flywheel uses a 50 oz imbalance and will need to be rebalanced or replaced. Many people recommend replacing the aluminum front input shaft retainer with a steel one...
  4. M

    Flywheel: Steel vs Aluminum

    I found a really good deal on an aluminum flywheel for my upcoming T5 conversion. I have a 289 thats stock right now and won't see drastic upgrades. I also use my car as a daily driver. Is the aluminum up to the task? or will the steel outlast it?
  5. M

    How much to resurface a flywheel?

    sweet
  6. M

    How much to resurface a flywheel?

    anyone know about how much it costs to have a billet aluminum flywheel resurfaced?
  7. M

    Know if its possible to find a 67/8 fastback

    its gonna be A LOT harder to find anything (especially at that price) here in southern california. If you look out of state you probably have a better shot at finding something that will work for you.
  8. M

    factory GT?

    check out this site, it should have just about everything you need. http://www.kcode.net/GT65-66.htm
  9. M

    Aod Not Shifting To Forth???!!

    do you think its getting into overdrive? does it cruise pretty comfortably at 65 or are you wound out? try shifting one below drive and see if it goes into a lower gear initially (1st)
  10. M

    Aod Not Shifting To Forth???!!

    oh yeah...
  11. M

    Aod Not Shifting To Forth???!!

    what RPM's are you running at what speed on the highway? and what is your rear gear ratio? it could be bypassing first gear in normal drive mode (my C4 does that)
  12. M

    lookin for a rebuilt T5...

    anyone know where I can get a rebuilt T5 for $700 or less in the SoCal area? I need something very reliable and i don't want to get screwed out of my hard earned cash
  13. M

    The younger generation has no clue about cars.......

    jes72mustang is right, we all have to start out somewhere. Some of those who are lucky grow up around engines and rebuild cars with their dads well before they can ever drive one. Some of us aren't so lucky. When i bought my mustang a couple years ago, i had no idea what i was getting myself...
  14. M

    Neutral safety switch

    the engine ground wire is brand new, and the wire from the solenoid to starter is less than 6 months old
  15. M

    Neutral safety switch

    i have taken my battery out in the morning about three times since this started happening before i tried to start it. I hooked it up to the charger and it immediately read "fully charged". I don't have a voltmeter but I'll get one and check it out, but i think the battery and charging system is...
  16. M

    Might as well start a thread - Maybe trading the 65 for a Contemporary Classic cobra

    I love my mustang, but I've always dreamed of building a cobra. only one problem though, anyone hear of a 6'7" guy fitting in one of those?
  17. M

    Neutral safety switch

    I have a 66 with a 289 and C4 thats been very slow starting lately. I discovered that the wires leading to the neutral safety switch were in contact with the exhaust and may have been damaged, i'm thinking this might be causing the starting problem, as i have checked everything else. Is it ok to...
  18. M

    The SN65 project car

    everyones lookin for this thread, just bumpin it up
  19. M

    Wow

    i'm pretty sure the SN65 thread is still there, its just down to 11 pages or something. go quickly and you can try to take credit for the trunk lock behind the gas cap idea :nice:
  20. M

    Wow

    its like we've traveled back in time!
Top Bottom
Back
Forums
Menu