Search results

  1. Screwed2V

    New and Old 4.6's ( question )

    P.I. headswap.
  2. Screwed2V

    Blower installation..

    Just the install? About 5 hours. Install and tune? Add a couple hours. Two days is more than enough provided they had a complete kit and a space on the dyno to tune it.
  3. Screwed2V

    Is it possible for T&J to come through again???

    :rlaugh: No ricer math here lmao. No advertiser claims either. You clearly didn't read my posts bc I never said that a stock GT will see no more than 5 HP from a catback. We're talking about a 4v car here that is notorious for having a cork in the exhaust. I never said a catback would add...
  4. Screwed2V

    Steeda Windshield Banner installation?

    Right. Just make sure you get all of the water out from behind the letters or they'll stick to the paper instead of the windshield and take it very slowly. Let the car sit for a couple hours too before you drive it to make sure the letters have adhered to the windshield.
  5. Screwed2V

    Steeda Windshield Banner installation?

    Use soapy water and a bank card or something of that nature as a squeegie. Your'e only gonna be able to install the banner however it came. If it's straight, then that must mean you have to install it that way. I'm sure it wouldn't come in a manner that required you to modify it to make it...
  6. Screwed2V

    Billet Interior

    Nervous? :shrug: It all just pops right off with the exception of the headlight knob and you just push the clip in from the little slot and it slides right out. What volume control knob replacement do you have? Mine has buttons, not knobs.
  7. Screwed2V

    How much $ should I pay for MOSRE axle shafts?

    Axles are a bit overpriced as well as the install price for the gears and you can reuse your abs rings.
  8. Screwed2V

    what tires to run?

    If your'e only driving it once or twice a week I'd go with the stickiest.......ET Streets.
  9. Screwed2V

    Magnaflow off-road x-pipe produce allot of smoke?

    Probably just the coating curing and any chemicals that may be on it burning off then.
  10. Screwed2V

    Magnaflow off-road x-pipe produce allot of smoke?

    Is it the coating that's on all exhaust curing and burning off or is there actual smoke coming from the tailpipes? Converters can mask small oil burning problems such as valve stem seals or rings so if you have had a oil consumption problem at all there's your problem. On a previous car I...
  11. Screwed2V

    Springs/Shocks/Struts

    Might look into the strange 10 way adjustables. You'll pay about $400 give or take a few for the whole set but it gives you a wide range of flexibility for the street and track. That being said, the Tokico shocks/struts are great pieces that will work fine without beating you to death...
  12. Screwed2V

    PI HEADS......PORT AND POLISHING??

    Why wouldn't you get the ported heads if you have the money? No reason not to. Just be careful not to get caught up in manufacturers claims of horsepower numbers.
  13. Screwed2V

    Turbonator increase up to 35hp

    Don't waste your money.
  14. Screwed2V

    The Culprit.

    I was in awe when I compared a stock rod to a H beam rod. Huge difference lol. Good luck on your build.
  15. Screwed2V

    Question about injectors

    Takes about an hour. Nothing to it.
  16. Screwed2V

    Underdrive Pully set

    Sure, put them on.
  17. Screwed2V

    Will bigger injectors work?.....

    Changing injectors is an hour job so I wouldn't install them now. Just wait until you get the blower and put them on then. The injectors don't "boost" horsepower. They are one of the supporting components that allow you to make more power but there is no gain just by adding them.
  18. Screwed2V

    P1SC leaking again!!!!!!!

    http://www.modularmustangs.net/showthread.php?t=4296
  19. Screwed2V

    P1SC leaking again!!!!!!!

    Your'e better off selling your blower as a tuner kit and buying a vortech/paxton tuner kit to replace it. I think I sold my ATI for $2800 that way and found an s trim tuner kit for close to the same so I didn't lose much, if any money. I saw a brand new intercooled polished novi 2000 for sale...
  20. Screwed2V

    P1SC leaking again!!!!!!!

    I went through the same thing and after realizing they would do nothing but keep replacing the seal I decided to just sell it and went with a vortech. Much better quality blower and actually made more power in my case.
Top Bottom
Back
Forums
Menu