Search results

  1. Boostedpimp

    Ford Racing Z2363 Crate Engine Build

    You need one of these too :) https://s1sequential.com/product/sequential-shifter-ford-viper-tr6060-t56/?ph=520e08a63daa08ffebfa06f6
  2. Boostedpimp

    Ford Racing Z2363 Crate Engine Build

    I've had the black ones before on a prior car and they looked pretty classy. The grey ones I agree look blah I've also had the ford motorsport ones in the past and had them polished. They looked great but were a real pita to keep clean looking with the fins
  3. Boostedpimp

    How to reduce interior rattle.

    I would suggest everything Dan02gt posted above
  4. Boostedpimp

    NEW 347 WON'T IDLE

    What is the idle speed? If it were me, I'd probably do a leak down test first If I was 100 percent sure their were zero vacuum leaks and I didn't use the wrong length pushrods but off the top of my head only reasons I can think of would be late ignition/valve timing, low compression...
  5. Boostedpimp

    CLUTCH NIGHTMARES

    If it were me I would have asked the shop since they are working Mcleod support to have another hydraulic setup sent over to swap in Perhaps the first one is garbage?
  6. Boostedpimp

    NEW 347 WON'T IDLE

    I would think with that cam at 850 RPM you should be seeing 13.0 to 13.5", 10 sounds pretty damn low
  7. Boostedpimp

    Engine Running hot and driving me crazy

    I'm a fan of underdrive pullies. I daily with them but I feel you need a decent electric fan and alt upgrade to use them otherwise they'll bring to light any charging system or cooling system weaknesses you may have if any.
  8. Boostedpimp

    Build Thread Mustang5L5's Build Thread -

    lol I made one a few years back with a pickle jar, bic pen, bicycle pump and some clear tubing.. worked amazing. Gonna need to make it again this week probably
  9. Boostedpimp

    Wired backwards? Engine coolant temp sensor... please help 1986 5.0

    Doesn't matter your acting like a dbag
  10. Boostedpimp

    Another turbo AWD Ford

    turbo cars are addictive. I've owned many and still own a few and they always put a smile on my face when the weather is a little crisp out
  11. Boostedpimp

    Progress Thread Pete is checking out these valve covers

    All the more reason to coat it to protect paint and moldings.
  12. Boostedpimp

    Progress Thread Pete is checking out these valve covers

    If you find someone who uses the right product and knows what they are doing it is amazing. Not cheap but amazing. Not all products are the same. From my experience ceramicpro is tops. I have someone in the family that does this. He had to get certified and maintain the certification in order...
  13. Boostedpimp

    Some things did not age will on the Foxbody Mustang.

    Saleen did the wind tunnel and track testing thus the wing was born.
  14. Boostedpimp

    Steering Column Help/:taco:hing

    Woops looking at it quickly on my phone I thought it was more of a y shape and assumed a tbird wheel. Looking at it now it's definitely a pre 90 fox wheel
  15. Boostedpimp

    Drivetrain Help with loud clutch bang sound.

    Any transmission slap isn't expectable in any of my cars so if it were me I would pull it out of the car and look for the problem piece(s)
  16. Boostedpimp

    Steering Column Help/:taco:hing

    I didn't read all the replies but that steering wheel is from a thunderbird. Not sure if there are differences in the column but I woudl assume so. Try loosening the four bolts that hold the column up and center it to where you want?
  17. Boostedpimp

    Engine Intake, throttle body, mass air combo

    Listen to these guys. If you don't plan on going with some nice heads then pickup an explorer lower and rock the cobra.. I've installed a Systemax 2 intake on a stock motor with headers, hpipe, catback, 70mm tb and 80mm maf and I can say it lost a good bit of low end torque. Previous setup...
  18. Boostedpimp

    1990 Mustang Gt Fuel, Spark, no start

    I'd pull the ECM again and make sure you didn't fry it... If you did then I would look at the oxygen sensor wiring to verify it is correct before repairing the ECM a second time.
  19. Boostedpimp

    What Is Wrong With This Picture ???

    Yup looking at my upr k your in the wrong set of holes
  20. Boostedpimp

    Fox What are some good Lx tail light options? Aftermarket/ledor oem style..

    *
Top Bottom
Back
Forums
Menu